|
HHANSEN接頭，快速接頭產品/公司介紹
一、單向關斷接頭
【產品系列】
1. 1000/400/500系列
2. 3000/4000/5000/6000系列
3. P-30/P-40系列
4. AUTO-FLO 23/24系列
5. 180/280系列
6. 600/700系列
7. 2RL/3RL系列
8. SAFELINE系列
9. 80系列
10. 380系列
11. G600系列
12. 1900
13. T1300系列
二、雙向關斷接頭
【產品系列】
1、 HK系列（ISO7241-1A）
2、 H15000系列（ISO7241-1B）
3、 H5000系列
4、 FF系列（ISO16028）
5、 DB系列
6、 W6000系列
7、 96翼形系列
8、 WA56000/HP3系列
9、 UP10高壓系列
10、 2HKIG/2HKIL系列
三、直通式接頭
【ST系列】
ST系列是一種無閥門接頭，用于需要大流量及少壓降的領域。
應用：ST系列提供的大流量被用于壓力清洗裝置、蒸汽清洗、液體運輸、模具冷卻線路及化工。
主體尺寸：1/8”、1/4”、3/8”、1/2”、3/4”、1”、1-1/4”、1-1/2”、2”、2-1/2”
材質：鋼、黃銅、不銹鋼、塑料
螺紋連接形式：NPT、BSP、坡口連接
工作壓力：
鋼質接頭可承受：5,500psi(380bar)
黃銅接頭可承受：5,200psi(360bar)
不銹鋼接頭可承受：7,500psi(520bar)
塑料接頭可承受：100psi(8bar)
【產品系列】
1、 ST系列
2、 P2-ST/P3-ST系列
3、 GH系列
四、模具/注塑專用接
球型鎖定、單向或雙向切斷接頭，采用平板設計。
【FLO-TEMP 200/300/500系列】
FLO-TEMP系列可以提供帶閥門或無閥門的接頭，在注模冷卻過程中提供流量。有各種各樣的軟管接頭可選擇：90度、135度的標準坡口連接
QUICK COUPLING
HANSEN COUPLINGS
HANSEN COUPLINGS
By focusing exclusively on couplings, Tuthill Coupling Group has achieved a competitive edge in providing the worlds best and most complete line of quick disconnect couplings. The quick connect/disconnect coupling was .rst developed and manufac-tured by Hansen Manufacturing Company, founded in 1915 by Fred Hansen. Since then, the Hansen coupling has become the industry standard for all quick connect/disconnect couplings.
Tuthill Coupling Group designs, manufactures and distributes a broad range of couplings in brass, steel, stainless steel and plastic. These products are used to quickly connect and dis-connect a wide variety of .uids and gases, especially air and hydraulic oil.
The bodies, sleeves and plugs are manufactured by Tuthill
Coupling Group, then hardened and plated as required, and then assembled with other components such as stainless steel balls, seals and valves. Hansen Couplings are available in over 3,000 con.gurations, which are marketed to end users and original equipment manufacturers all over the world.
Since Hansen was purchased by Tuthill Corporation in 1979, it has maintained a steady pattern of growth. Tuthill Coupling Group will continue to be a major factor in this market by offering a com-prehensive range of products, which are thoroughly researched, carefully designed, and precision manufactured. Our products are widely distributed through an increasingly strong network of worldwide distributors that are well versed in the engineered .uid power product needs of our customers.
4
HANSEN COUPLINGS
PRODUCT ENGINEERING
Many designs created as full spe-cials have now become the world standard. Tuthill Coupling Group has provided full service solutions, dedicated exclusively to quick dis-connect applications. Tuthill Cou-pling Groups engineers develop new products and modify designs of existing products using the latest Computer Aided Design programs.
PRODUCT DESIGN &
PROTOTYPE
Tuthill Coupling Groups state of the art prototype development lab offers a unique environment for cycle testing, pressure testing and full model shop manufacturing. Quality controlled stan-dards insure complete success on new and standard product designs. Tuthill Coupling Group products maintain a constantly high level of quality and dependability through extensive product testing and evaluation.
QUALITY CONTROL
Tuthill Coupling Groups Quality Management System is registered to rigid ISO 9001:2000
standards. The highest quality raw materials and components are machined and meticulously assembled. Care is taken to record and maintain speci.c tolerances in the day-to-day production of our products through constant monitoring and calibrating of our production equipment.
CUSTOMER SERVICE
Your highly trained inside sales representative is equipped to aid customers in product
selection and to ensure your order is processed quickly, ef.ciently and accurately. Our
customer ful.llment staff works closely with their corresponding outside sales individual to ensure consistent personalized assistance from the time an order is placed to the .nal as-sembly point of the product. Our distributors are strategically located throughout the world to provide prompt delivery of Hansen Couplings. Tuthill Coupling Groups goal is to provide our customers with the best service and technical support available.
ISO 9001:2000
Certi.cate No. 006888
5
HANSEN COUPLINGS
Table of Contents
ONE-WAY SHUT-OFF COUPLINGS 7-32
Selection Chart for One-Way Couplings ...........................................8
One-Way Plug Interchange Chart .....................................................9
1000/400/500 ..................10-13
3000/4000/5000/6000 .....14-18
P-30/P-40 .........................19
Auto-Flo 23 & 24 .............20-23
Safeline ...........................23
180/280 ...........................24
100 ...................................25-26
600/700 ...........................27-29
2RL/3RL ..........................30-32
TWO-WAY SHUT-OFF COUPLINGS33-52
Selection Chart for Two-Way Couplings ............................................34
HK ...................................35-39
HA 15000 ........................40-41
FF .....................................42-43
96 ....................................44
UP10 ...............................45
WA 56000 .......................46
2HKIG/2HKIL ..................47-48
DB ...................................49
WA 10000 .......................50-52
STRAIGHT-THROUGH COUPLINGS 53-60
Selection Chart for Straight-Through Couplings ...............................54
ST ...................................55-57
P2-ST/P3-ST ....................58
GH ....................................58
Flo-Temp .........................59-60
GAS COUPLINGS 61-62
Gas Mate ........................62
ACCESSORIES / ELASTOMERS /
ALPHANUMERIC PART INDEX / TECHNICAL INFORMATION 63-77
Flow Sensor ....................64
Check Valves ....................65
Fittings .............................66-67
Dust Caps & Plugs ...........68-69
Flex-Air .............................70
Elastomer Selection Guide ...............................................................71
Alphanumeric Part Index ..72-76
Technical & Warranty Information .....................................................79
6
HANSEN COUPLINGS
ONE-WAY
ONE-WAY
7
8
HANSEN COUPLINGS
HANSEN COUPLINGS
ONE-WAY COUPLINGS
7
Contents and Selector Chart
Coupling Style
Body
Material
Locking Mechanism
Interchange
Body Size
Options
MANUAL CONNECT
PUSH-TO-CONNECT
SAFETY COUPLING
INDUSTRIAL INTERCHANGE
ARO 210
TRU-FLATE
CEJN 320/RECTUS 25
HANSEN RL STYLE
HANSEN UNIQUE DESIGN
1/8 INCH
1/4 INCH
3/8 INCH
1/2 INCH
3/4 INCH
ALUMINUM
BRASS
STEEL (Zinc/Chromate Finish)
STAINLESS STEEL
PLASTIC (Acetal)
BALL LOCK
PIN LOCK
RING LOCK
PLASTIC FINGERS
SLEEVE LOCK
SEAL MATERIALS (Various)
DUST CAP (Vinyl)
Coupling
Series Page
1000 11
400 12
500 13
3000 15
4000 16
5000 17
6000 18
P-30 19
P-40 19
Auto-Flo 23 21
Auto-Flo 24 21
Safeline 23
180/280 24
100 25
600/700 27
2-RL 31
3-RL 32
Sleeve lock is automatic with RL couplings.
ONE-WAY PLUG
Interchange Chart
The plug pro.les shown below are actual size. This chart can be used to help select Hansen one-way couplings. Industrial Interchange plugs of the appropriate size connect with the following Series sockets: 1000, 400, 500, 3000, 4000, 5000, 6000, Auto-Flo 23, P-30,
P-40 and SVS. ARO 210 and Tru-Flate 1/4 plugs connect with Auto-Flo 23 sockets. Tru-Flate 3/8 plugs connect with Series 400 sockets. Auto-Flo 24 plugs interchange with CEJN 320 and Rectus 24. The bottom row of this chart shows unique Hansen plug designs.
Industrial Interchange
ARO 210
Tru-Flate
Auto-Flo 24
Tru-Flate
180/280
100
600
700
2RL
3RL
Series 1000/400/500
Industrial Interchange
Industrial Interchange Ball Lock Quick-Connect Couplings de-signed for compressed air, gases, and liquids. Body sizes are 1/4, 3/8 and 1/2.
Features
. Ball lock
. Manual operation
. Rugged, reliable
. 1/4 and 1/2 sockets accept
MIL-C-4109 plugs
. Optional sleeve lock prevents accidental disconnection
. Optional seal and valve materials
available
. Optional stainless steel socket
(Series 1000 only)
. Series 400 sockets accept Tru-Flate Interchange plugs and Industrial Interchange plugs
Standard Materials
. Socket
- Brass Body
- Nickel Plated Steel Sleeve
- Zinc Plated Steel Valve
- Buna-N (Nitrile) Seal
- Stainless Steel Springs
- Stainless Steel Locking Balls
. Plug
- Zinc Plated Case-Hardened
Steel (All Sizes)
- Brass (All Sizes)
- Stainless Steel (Series 1000)
Accessories
. Dust caps and dust plugs
(See page 68)
Rated Pressure
Series Size PSI BAR
1000 1/4 2,000 138
400 3/8 1,000 69
500 1/2 500 35
Flow Capacity
Series . Ac
1000 28
400 45
500 72
NOTE: Series 400 operating
pressure is 150 psi when connected
to Tru-Flate Interchange plug.
. Air .ow (scfm) with 5 psi
pressure drop and 100 psig
inlet pressure
Series 1000 1/4 Nominal
SOCKETS PLUGS
Male End Connections
Female End Connections
Hose Stem End Connections
Hose Clamp End Connections
Part No. Thread Dimensions
Steel Size C D HEX
10 1/4-18 NPTF 1.75 0.65 0.56
10C 1/4-18 NPTF 1.75 0.65 0.56
10G. 1/4-18 NPTF 1.75 0.65 0.56
12 1/8-27 NPTF 1.59 0.58 0.50
12G. 1/8-27 NPTF 2.38 0.77 0.69
14 3/8-18 NPTF 1.75 0.79 0.69
14G. 3/8-18 NPTF 2.53 0.77 0.69
10-43 7/16-20* 1.69 0.58 0.50
Brass
B-10 1/4-18NPTF 1.75 0.64 0.56
Stainless
LL-10 1/4-18 NPTF 1.75 0.65 0.56
Part No. Thread Dimensions
Brass Size A B HEX
900 1/8-27 NPTF 2.07 1.00 0.69
1100 1/4-18 NPTF 2.22 1.00 0.69 1300 3/8-18 NPTF 2.22 1.00 0.69 1000-43 7/16C20* 2.16 1.00 0.69 1000-63 5/8C18* 2.29 1.00 0.69
Stainless
LL-1100 1/4-18 NPTF 2.22 1.00 0.69
Thread Dimensions
Part No. Size A B HEX
800 1/8-27 NPTF 1.91 1.00 0.69
1000 1/4-18 NPTF 1.91 1.00 0.69 1200 3/8-18 NPTF 2.19 1.00 0.75
Stainless
LL-1000 1/4-18 NPTF 1.91 1.00 0.69
Part No. Thread Dimensions
Steel Size C D HEX
11 1/4-18 NPTF 1.63 0.79 0.69
11G. 1/4-18 NPTF 2.44 0.77 0.69
13 1/8-27 NPTF 1.47 0.65 0.56
15 3/8-18 NPTF 1.69 0.94 0.81
Brass
11B 1/4-18 NPTF 1.63 0.78 0.69
Stainless
LL-11 1/4-18 NPTF 1.63 0.79 0.69
Dimensions
Part No. Hose I.D. A B
1600 1/4 2.66 1.00
1600P. 1/4 2.44 1.00 1700 3/8 2.65 1.00 1700P. 3/8 2.54 1.00 1800 5/16 2.66 1.00
Part No. Dimensions
Steel Hose I.D. C D
16 1/4 2.22 0.50
16G. 1/4 2.97 0.77
16P. 1/4 2.00 0.69
16PG. . 1/4 2.75 0.77
17 3/8 2.31 0.50
17G. 3/8 2.96 0.77
17P. 3/8 2.06 0.87
17PG. . 3/8 2.85 0.87
18 5/16 2.22 0.50
Brass
B-17 3/8 2.31 0.50
Hose Dimensions
Part No. I.D. O.D. A B HEX
1-SA0 3/16 7/16 2.69 1.00 0.56 1-SA3 3/16 1/2 2.69 1.00 0.63
1-SB1 1/4 15/32 2.75 1.00 0.63 1-SB3 1/4 1/2 2.75 1.00 0.63 1-SB5 1/4 9/16 2.75 1.00 0.69 1-SB7 1/4 5/8 2.75 1.00 0.75
1-SC5 5/16 9/16 2.82 1.00 0.69 1-SC7 5/16 5/8 2.82 1.00 0.75 1-SC9 5/16 11/16 2.82 1.00 0.81 1-SD5 3/8 9/16 2.88 1.00 0.69 1-SD7 3/8 5/8 2.88 1.00 0.75 1-SD9 3/8 11/16 2.88 1.00 0.81 1-SD11 3/8 3/4 2.88 1.00 0.88
Part No. Hose Dimensions
Steel I.D. O.D. C D HEX
3-PA0 3/16 7/16 2.25 0.63 0.56 3-PA3 3/16 1/2 2.25 0.70 0.63
3-PB1 1/4 15/32 2.31 0.70 0.63 3-PB3 1/4 1/2 2.31 0.70 0.63 3-PB5 1/4 9/16 2.31 0.77 0.69 3-PB7 1/4 5/8 2.31 0.84 0.75
3-PB9 1/4 11/16 2.31 0.91 0.81
3-PB11 1/4 3/4 2.31 0.98 0.88
3-PC5 5/16 9/16 2.38 0.77 0.69 3-PC7 5/16 5/8 2.38 0.84 0.75
3-PC9 5/16 11/16 2.38 0.91 0.81 3-PD5 3/8 9/16 2.44 0.77 0.69 3-PD7 3/8 5/8 2.44 0.84 0.75 3-PD9 3/8 11/16 2.44 0.91 0.81
3-PD11 3/8 3/4 2.44 1.98 0.88 3-PD13 3/8 13/16 2.44 1.05 0.94 3-PD15 3/8 7/8 2.44 1.12 1.00
*45 Male Flare With Ball Check .With Bleeder Ball Check C Reduces hose whip when disconnecting. .For use with push-on style hose.
Example: 1000 - BV - SL - 143
How to build a socket part number with options:
Seal Material:
138 = Silicone
143 = Viton
192 = EPDM
Standard Part Number
from Socket Tables Above
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
Valve Material:
BV = Brass
LLV = 303 Stainless Steel
SL = Sleeve Lock
Series 400 3/8 Nominal
SOCKETS PLUGS
Male End Connections
Part No. Thread Dimensions
Steel Size C D HEX
38 1/8-27 NPTF 1.72 0.72 0.63
40 1/4-18 NPTF 1.88 0.72 0.63 40G. 1/4-18 NPTF 2.65 0.77 0.69 42 3/8-18 NPTF 1.88 0.79 0.69 42G. 3/8-18 NPTF 2.65 0.77 0.69 44 1/2-14 NPTF 2.09 1.01 0.88
Brass
B-40 1/4-18 NPTF 1.88 0.70 0.63 B-42 3/8-18 NPTF 1.88 0.77 0.69
Thread Dimensions
Part No. Size A B HEX
410-A 1/8-27 NPTF 2.20 1.13 0.88
410 1/4-18 NPTF 2.35 1.13 0.88 430 3/8-18 NPTF 2.35 1.13 0.88 450 1/2-14 NPTF 2.54 1.13 0.88
Part No. Thread Dimensions
Steel Size C D HEX
31AP-25M 1/4-18 NPTF 1.85 0.72 0.63
31AP-37M 3/8-18 NPTF 1.85 0.79 0.69
Female End Connections
Part No. Thread Dimensions
Steel Size C D HEX
41 1/4-18 NPTF 1.63 0.79 0.69 41G. 1/4-18 NPTF 2.56 0.77 0.69 43 3/8-18 NPTF 1.81 0.94 0.81 43G. 3/8-18 NPTF 2.62 0.84 0.75 45 1/2-14 NPTF 2.06 1.15 1.00
Brass
B-43 3/8-18 NPTF 1.81 0.91 0.81
Thread Dimensions
Part No. Size A B HEX
400-A 1/8-27 NPTF 2.10 1.13 0.88
400 1/4-18 NPTF 2.10 1.13 0.88 420 3/8-18 NPTF 2.35 1.13 0.88 440 1/2-14 NPTF 2.62 1.13 1.00
Part No. Thread Dimensions
Steel Size C D HEX
31AP-25F 1/4-18 NPTF 1.60 0.79 0.69
31AP-37F 3/8-18 NPTF 1.78 0.94 0.81
Hose Stem End Connections
Dimensions
Part No. Hose I.D. A B
4004 1/4 2.82 1.13 4050 5/16 2.82 1.13 4006 3/8 2.82 1.13 4008 1/2 2.82 1.13
Part No. Dimensions
Steel Hose I.D. C D
404 1/4 2.34 0.63 406 3/8 2.34 0.63 408 1/2 2.34 0.81
Brass
B-406 3/8 2.34 0.63
Hose Clamp End Connections
Hose Dimensions
Part No. I.D. O.D. A B HEX
40-SB3 1/4 1/2 2.92 1.13 0.63
40-SB7 1/4 5/8 2.92 1.13 0.75
40-SD7 3/8 5/8 3.04 1.13 0.75 40-SD9 3/8 11/16 3.04 1.13 0.81 40-SD11 3/8 3/4 3.04 1.13 0.88 40-SD13 3/8 13/16 3.04 1.13 0.94
40-SP13 1/2 13/16 3.67 1.13 0.94 40-SP15 1/2 7/8 3.67 1.13 1.00 40-SP17 1/2 15/16 3.67 1.13 1.06 40-SP19 1/2 1 3.67 1.13 1.13
Part No. Hose Dimensions
Steel I.D. O.D. C D HEX
4-PB1 1/4 15/32 2.44 0.70 0.63 4-PB3 1/4 1/2 2.44 0.70 0.63 4-PB5 1/4 9/16 2.44 0.77 0.69 4-PB7 1/4 5/8 2.44 0.84 0.75 4-PB9 1/4 11/16 2.44 0.91 0.81 4-PB11 1/4 3/4 2.44 0.98 0.88
4-PD5 3/8 9/16 2.56 0.77 0.69 4-PD7 3/8 5/8 2.56 0.84 0.75 4-PD9 3/8 11/16 2.56 0.91 0.81 4-PD11 3/8 3/4 2.56 0.98 0.88 4-PD13 3/8 13/16 2.56 1.05 0.94 4-PD15 3/8 7/8 2.56 1.12 1.00
4-PP13 1/2 13/16 3.25 1.05 0.94 4-PP15 1/2 7/8 3.25 1.12 1.00 4-PP17 1/2 15/16 3.25 1.19 1.06 4-PP19 1/2 1 3.25 1.26 1.13
.With Bleeder Ball Check C Reduces hose whip when disconnecting.
How to build a socket part number with options:
Example: 400 - BV - SL - 143
Seal Material:
138 = Silicone
143 = Viton
192 = EPDM
Standard Part Number
from Socket Tables Above
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
Valve Material:
BV = Brass
LLV = 303 Stainless Steel
SL = Sleeve Lock
All dimensions in inches.
Series 500 1/2 Nominal
SOCKETS PLUGS
Male End Connections
Thread Dimensions
Part No. Size A B HEX
501 1/4-18 NPTF 2.77 1.19 1.00 510 3/8-18 NPTF 2.78 1.19 1.00 530 1/2-14 NPTF 2.97 1.19 1.00 550 3/4-14 NPTF 2.97 1.19 1.06
Part No. Thread Dimensions
Steel Size C D HEX
50 1/4-18 NPTF 2.25 0.79 0.69
50G. 1/4-18 NPTF 2.90 0.98 0.88 52 3/8-18 NPTF 2.25 0.87 0.75 52G. 3/8-18 NPTF 2.90 0.98 0.88
54 1/2-14 NPTF 2.44 1.01 0.88
54G. 1/2-14 NPTF 3.09 0.98 0.88 56 3/4-14 NPTF 2.50 1.23 1.06
56G. 3/4-14 NPTF 3.14 1.19 1.06
Brass
B-52 3/8-18 NPTF 2.25 0.70 0.63 B-54 1/2-14 NPTF 2.44 0.77 0.88
Female End Connections
Thread Dimensions
Part No. Size A B HEX
500-A 1/4-18 NPTF 2.72 1.19 1.00
500 3/8-18 NPTF 2.78 1.19 1.00 520 1/2-14 NPTF 3.06 1.19 1.00 540 3/4-14 NPTF 3.09 1.19 1.19
Part No. Thread Dimensions
Steel Size C D HEX
53-A 1/4-18 NPTF 1.92 0.79 0.69 53 3/8-18 NPTF 2.06 0.94 0.81 53G. 3/8-18 NPTF 2.90 0.98 0.88 55 1/2-14 NPTF 2.34 1.15 1.00 55G. 1/2-14 NPTF 3.17 0.98 0.88 57 3/4-14 NPTF 2.44 1.37 1.19
Hose Stem End Connections
Dimensions
Part No. Hose I.D. A B
570 3/8 3.32 1.19
580 1/2 3.24 1.19 590 3/4 4.09 1.19
Part No. Dimensions
Steel Hose I.D. C D
585 5/16 2.66 0.69 585G. 5/16 3.37 0.98 59 3/8 2.66 0.69 59G. 3/8 3.37 0.98 60 1/2 2.66 0.75 60G. 1/2 3.37 0.98 61 3/4 3.50 1.00 61G. 3/4 4.22 0.98
Brass
B-60 1/2 2.75 0.88
Hose Clamp End Connections
Part No. Hose Dimensions
Steel I.D. O.D. C D HEX
5-PB1 1/4 15/32 2.81 0.70 0.63 5-PB3 1/4 1/2 2.81 0.70 0.63 5-PB5 1/4 9/16 2.81 0.77 0.69 5-PB7 1/4 5/8 2.81 0.84 0.75 5-PD5 3/8 9/16 2.94 0.77 0.69 5-PD7 3/8 5/8 2.94 0.84 0.75 5-PD9 3/8 11/16 2.94 0.91 0.81 5-PD11 3/8 3/4 2.94 0.98 0.88 5-PD13 3/8 13/16 2.94 1.05 0.94 5-PD15 3/8 7/8 2.94 1.12 1.00
5-PP13 1/2 13/16 3.62 1.05 0.94 5-PP15 1/2 7/8 3.62 1.12 1.00 5-PP17 1/2 15/16 3.62 1.19 1.06 5-PP19 1/2 1 3.62 1.26 1.13
5-PR23 3/4 11/8 3.75 1.40 1.25
5-PR25 3/4 13/16 3.75 1.47 1.31
5-PR27 3/4 11/4 3.75 1.54 1.38
Hose Dimensions
Part No. I.D. O.D. A B HEX
50-SD7 3/8 5/8 3.49 1.19 0.75 50-SD13 3/8 13/16 3.49 1.19 0.94
50-SP13 1/2 13/16 4.09 1.19 0.94 50-SP15 1/2 7/8 4.09 1.19 1.00 50-SP17 1/2 15/16 4.09 1.19 1.06 50-SP19 1/2 1 4.09 1.19 1.13
50-SR23 3/4 11/8 4.22 1.19 1.25 50-SR25 3/4 13/16 4.22 1.19 1.31 50-SR27 3/4 11/4 4.22 1.19 1.38
.With Bleeder Ball Check C Reduces hose whip when disconnecting.
How to build a socket part number with options:
Example: 500 - SL - 143
Seal Material:
143 = Viton
192 = EPDM
Standard Part Number
from Socket Tables Above
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
SL = Sleeve Lock
3000/4000/5000/6000
Industrial Interchange
Industrial Interchange Pin Lock Couplings designed for com-pressed air, gases, and liquids. Body sizes are 1/4, 3/8, 1/2 and 3/4.
Features
. The orginal automatic one-way shutoff coupling designed by HansenThe Industry Standard
. Rugged, reliable
. Easy, automatic, push-to-connect design provides instantaneous connection and disconnection of lines, plus automatic shut-off of socket end of line
. 1/4 and 1/2 sockets accept
MIL-C-4109 plug
. Optional sleeve lock prevents
accidental disconnection
. Optional seal and valve materials
available
Standard Materials
. Socket
- Brass Body
- Zinc Plated Steel Valve
- Buna-N (Nitrile) Seal
- Stainless Steel Springs
- Stainless Steel Locking Pins
. Plug
- Zinc Plated Case-Hardened Steel (All Sizes)
- Brass (All Sizes)
- Stainless Steel (Series 3000)
Accessories
. Dust caps and dust plugs
(See page 68)
Rated Pressure
Series Size PSI BAR
3000 1/4 2,000 138
4000 3/8 1,000 69
5000 1/2 500 35
6000 3/4 220 15
Flow Capacity
Series . Ac
3000 28
4000 45
5000 72
6000 125
. Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure
Series 3000 1/4 Nominal
SOCKETS PLUGS
Male End Connections
Part No. Thread Dimensions
Steel Size C D HEX
10 1/4-18 NPTF 1.75 0.65 0.56
10C 1/4-18 NPTF 1.75 0.65 0.56
10G. 1/4-18 NPTF 1.75 0.65 0.56
12 1/8-27 NPTF 1.59 0.58 0.50
12G. 1/8-27 NPTF 2.38 0.77 0.69
14 3/8-18 NPTF 1.75 0.79 0.69
14G. 3/8-18 NPTF 2.53 0.77 0.69
Brass
B-10 1/4-18 NPTF 1.75 0.64 0.56
Stainless
LL-10 1/4-18 NPTF 1.75 0.65 0.56
Part No. Thread Dimensions
Brass Size A B HEX
2900 1/8-27 NPTF 2.11 1.19 0.69
3100 1/4-18 NPTF 2.26 1.19 0.69
3300 3/8-18 NPTF 2.26 1.19 0.69
3000-43 7/16C20* 2.20 1.19 0.69
3000-63 5/8C18* 2.33 1.19 0.69
Female End Connections
Part No. Thread Dimensions
Brass Size A B HEX
2800 1/8-27 NPTF 1.95 1.19 0.69
3000 1/4-18 NPTF 2.17 1.19 0.69
3200 3/8-18 NPTF 2.23 1.19 0.75
Part No. Thread Dimensions
Steel Size C D HEX
11 1/4-18 NPTF 1.63 0.79 0.69
11G. 1/4-18 NPTF 2.44 0.77 0.69
13 1/8-27 NPTF 1.47 0.65 0.56
15 3/8-18 NPTF 1.69 0.94 0.81
Brass
11B 1/4-18 NPTF 1.63 0.78 0.69
Stainless
LL-11 1/4-18 NPTF 1.63 0.79 0.69
Hose Stem End Connections
Part No. Dimensions
Brass Hose I.D. A B
3600 1/4 2.70 1.19
3600P. 1/4 2.48 1.19
3700 3/8 2.69 1.19
3700P. 3/8 2.58 1.19
3800 5/16 2.70 1.19
Part No. Dimensions
Steel Hose I.D. C D
16 1/4 2.22 0.50
16G. 1/4 2.97 0.77
16P. 1/4 2.00 0.69
16PG. 1/4 2.75 0.77
17 3/8 2.31 0.50
17G. 3/8 2.96 0.77
17P. 3/8 2.06 0.87
17PG. . 3/8 2.85 0.87
18 5/16 2.22 0.50
Brass
B-17 3/8 2.31 0.50
Hose Clamp End Connections
Part No. Hose Dimensions
Brass I.D. O.D. A B HEX
3-SA0 3/16 7/16 2.73 1.19 0.56
3-SA3 3/16 1/2 2.73 1.19 0.63
3-SB1 1/4 15/32 2.79 1.19 0.63
3-SB3 1/4 1/2 2.79 1.19 0.63
3-SB5 1/4 9/16 2.79 1.19 0.69
3-SB7 1/4 5/8 2.79 1.19 0.75
3-SB9 1/4 11/16 2.79 1.19 0.81
3-SB11 1/4 3/4 2.79 1.19 0.88
3-SC5 5/16 9/16 2.86 1.19 0.69
3-SC7 5/16 5/8 2.86 1.19 0.75
3-SC9 5/16 11/16 2.86 1.19 0.81
3-SD5 3/8 9/16 2.92 1.19 0.69
3-SD7 3/8 5/8 2.92 1.19 0.75
3-SD9 3/8 11/16 2.92 1.19 0.81
3-SD11 3/8 3/4 2.92 1.19 0.88
3-SD13 3/8 13/16 2.92 1.19 0.94
Part No. Hose Dimensions
Steel I.D. O.D. C D HEX
3-PA0 3/16 7/16 2.25 0.63 0.56
3-PA3 3/16 1/2 2.25 0.70 0.63
3-PB1 1/4 15/32 2.31 0.70 0.63
3-PB3 1/4 1/2 2.31 0.70 0.63
3-PB5 1/4 9/16 2.31 0.77 0.69
3-PB7 1/4 5/8 2.31 0.84 0.75
3-PB9 1/4 11/16 2.31 0.91 0.81
3-PB11 1/4 3/4 2.31 0.98 0.88
3-PC5 5/16 9/16 2.38 0.77 0.69
3-PC7 5/16 5/8 2.38 0.84 0.75
3-PC9 5/16 11/16 2.38 0.91 0.81
3-PD5 3/8 9/16 2.44 0.77 0.69
3-PD7 3/8 5/8 2.44 0.84 0.75
3-PD9 3/8 11/16 2.44 0.91 0.81
3-PD11 3/8 3/4 2.44 0.98 0.88
3-PD13 3/8 13/16 2.44 1.05 0.94
3-PD15 3/8 7/8 2.44 1.12 1.00
*45 Male Flare With Ball Check .With Bleeder Ball Check C Reduces hose whip when disconnecting. .For use with push-on style hose.
How to build a socket part number with options:
Example: 3000 - BV - SL - 143
Seal Material:
138 = Silicone
143 = Viton
192 = EPDM
Standard Part Number
from Socket Tables Above
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
Valve Material:
BV = Brass
LLV = 303 Stainless Steel
SL = Sleeve Lock
Series 4000 3/8 Nominal
SOCKETS PLUGS
Male End Connections
Part No. Thread Dimensions
Brass Size A B HEX
4100-A 1/8-27 NPTF 2.20 1.38 0.88
4100 1/4-18 NPTF 2.35 1.38 0.88
4300 3/8-18 NPTF 2.35 1.38 0.88
4500 1/2-14 NPTF 2.54 1.38 0.88
Part No. Thread Dimensions
Steel Size C D HEX
38 1/8-27 NPTF 1.72 0.72 0.63
40 1/4-18 NPTF 1.88 0.72 0.63
40G. 1/4-18 NPTF 2.65 0.77 0.69
42 3/8-18 NPTF 1.88 0.79 0.69
42G. 3/8-18 NPTF 2.65 0.77 0.69
44 1/2-14 NPTF 2.09 1.01 0.88
Brass
B-40 1/4-18 NPTF 1.88 0.70 0.63
B-42 3/8-18 NPTF 1.88 0.77 0.69
Female End Connections
Part No. Thread Dimensions
Steel Size C D HEX
41 1/4-18 NPTF 1.63 0.79 0.69
41G. 1/4-18 NPTF 2.56 0.77 0.69
43 3/8-18 NPTF 1.81 0.94 0.81
43G. 3/8-18 NPTF 2.62 0.84 0.75
45 1/2-14 NPTF 2.06 1.15 1.00
Brass
B-43 3/8-18 NPTF 1.81 0.91 0.81
Part No. Thread Dimensions
Brass Size A B HEX
4000-A 1/8-27 NPTF 2.10 1.38 0.88
4000 1/4-18 NPTF 2.10 1.38 0.88
4200 3/8-18 NPTF 2.35 1.38 0.88
4400 1/2-14 NPTF 2.62 1.38 1.00
Hose Stem End Connections
Part No. Dimensions
Steel Hose I.D. C D
404 1/4 2.34 0.63
406 3/8 2.34 0.63
408 1/2 2.34 0.81
Brass
B-406 3/8 2.34 0.63
Part No. Hose Dimensions
Brass I.D. A B
40400 1/4 2.82 1.38
40500 5/16 2.82 1.38
40600 3/8 2.82 1.38
40800 1/2 2.92 1.38
Hose Clamp End Connections
Part No. Hose Dimensions
Steel I.D. O.D. C D HEX
4-PB1 1/4 15/32 2.44 0.70 0.63
4-PB3 1/4 1/2 2.44 0.70 0.63
4-PB5 1/4 9/16 2.44 0.77 0.69
4-PB7 1/4 5/8 2.44 0.84 0.75
4-PB9 1/4 11/16 2.44 0.91 0.81
4-PB11 1/4 3/4 2.44 0.98 0.88
4-PD5 3/8 9/16 2.56 0.77 0.69
4-PD7 3/8 5/8 2.56 0.84 0.75
4-PD9 3/8 11/16 2.56 0.91 0.81
4-PD11 3/8 3/4 2.56 0.98 0.88
4-PD13 3/8 13/16 2.56 1.05 0.94
4-PD15 3/8 7/8 2.56 1.12 1.00
4-PP13 1/2 13/16 3.25 1.05 0.94
4-PP15 1/2 7/8 3.25 1.12 1.00
4-PP17 1/2 15/16 3.25 1.19 1.06
4-PP19 1/2 1 3.25 1.26 1.13
Part No. Hose Dimensions
Brass I.D. O.D. A B HEX
4-SB3 1/4 1/2 2.92 1.38 0.63
4-SB5 1/4 9/16 2.92 1.38 0.69
4-SB7 1/4 5/8 2.92 1.38 0.75
4-SB9 1/4 11/16 2.92 1.38 0.81
4-SB11 1/4 3/4 2.92 1.38 0.88
4-SC7 5/16 5/8 2.98 1.38 0.75
4-SD5 3/8 9/16 3.04 1.38 0.69
4-SD7 3/8 5/8 3.04 1.38 0.75
4-SD9 3/8 11/16 3.04 1.38 0.81
4-SD11 3/8 3/4 3.04 1.38 0.88
4-SD15 3/8 7/8 3.04 1.38 1.00
4-SP13 1/2 13/16 3.67 1.38 0.94
4-SP15 1/2 7/8 3.67 1.38 1.00
4-SP17 1/2 15/16 3.67 1.38 1.06
4-SP19 1/2 1 3.67 1.38 1.13
.With Bleeder Ball Check C Reduces hose whip when disconnecting.
How to build a socket part number with options:
Example: 4000 - BV - SL - 143
Seal Material:
138 = Silicone
143 = Viton
192 = EPDM
Standard Part Number
from Socket Tables Above
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
Valve Material:
BV = Brass
LLV = 303 Stainless Steel
SL = Sleeve Lock
All dimensions in inches.
Series 5000 1/2 Nominal
SOCKETS PLUGS
Male End Connections
Part No. Thread Dimensions
Brass Size A B HEX
50100 1/4-18 NPTF 2.78 1.50 1.00
5100 3/8-18 NPTF 2.79 1.50 1.00
5300 1/2-14 NPTF 2.98 1.50 1.00
5500 3/4-14 NPTF 2.98 1.50 1.06
Part No. Thread Dimensions
Steel Size C D HEX
50 1/4-18 NPTF 2.25 0.79 0.69
50G. 1/4-18 NPTF 2.90 0.98 0.88
52 3/8-18 NPTF 2.25 0.87 0.75
52G. 3/8-18 NPTF 2.90 0.98 0.88
54 1/2-14 NPTF 2.44 1.01 0.88
54G. 1/2-14 NPTF 3.09 0.98 0.88
56 3/4-14 NPTF 2.50 1.23 1.06
56G. 3/4-14 NPTF 3.14 1.19 1.06
Brass
B-52 3/8-18 NPTF 2.25 0.70 0.63
B-54 1/2-14 NPTF 2.44 0.77 0.69
Female End Connections
Part No. Thread Dimensions
Brass Size A B HEX
5000-A 1/4-18 NPTF 2.72 1.50 1.00
5000 3/8-18 NPTF 2.79 1.50 1.00
5200 1/2-14 NPTF 3.07 1.50 1.00
5400 3/4-14 NPTF 3.10 1.50 1.19
Part No. Thread Dimensions
Steel Size C D HEX
53-A 1/4-18 NPTF 1.92 0.79 0.69
53 3/8-18 NPTF 2.06 0.94 0.81
53G. 3/8-18 NPTF 2.90 0.98 0.88
55 1/2-14 NPTF 2.34 1.15 1.00
55G. 1/2-14 NPTF 3.17 0.98 0.88
57 3/4-14 NPTF 2.44 1.37 1.19
Hose Stem End Connections
Part No. Dimensions
Brass Hose I.D. A B
50400 1/4 3.26 1.50
50500 5/16 3.29 1.50
5700 3/8 3.33 1.50
5800 1/2 3.25 1.50
5900 3/4 4.10 1.50
Part No. Dimensions
Steel Hose I.D. C D
585 5/16 2.66 0.69
585G. 5/16 3.37 0.98
59 3/8 2.66 0.69
59G. 3/8 3.37 0.98
60 1/2 2.66 0.75
60G. 1/2 3.37 0.98
61 3/4 3.50 1.00
61G. 3/4 4.22 0.98
Brass
B-60 1/2 2.75 0.88
Hose Clamp End Connections
Part No. Hose Dimensions
Brass I.D. O.D. A B HEX
5-SD5 3/8 9/16 3.50 1.50 0.69
5-SD7 3/8 5/8 3.50 1.50 0.75
5-SD9 3/8 11/16 3.50 1.50 0.81
5-SD11 3/8 3/4 3.50 1.50 0.88
5-SD13 3/8 13/16 3.50 1.50 0.94
5-SD15 3/8 7/8 3.50 1.50 1.00
5-SP13 1/2 13/16 4.10 1.50 0.94
5-SP15 1/2 7/8 4.10 1.50 1.00
5-SP17 1/2 15/16 4.10 1.50 1.06
5-SP19 1/2 1 4.10 1.50 1.13
5-SR23 3/4 11/8 4.23 1.50 1.25
5-SR25 3/4 13/16 4.23 1.50 1.31
5-SR27 3/4 11/4 4.23 1.50 1.38
Part No. Hose Dimensions
Steel I.D. O.D. C D HEX
5-PB1 1/4 15/32 2.81 0.70 0.63
5-PB3 1/4 1/2 2.81 0.70 0.63
5-PB5 1/4 9/16 2.81 0.77 0.69
5-PB7 1/4 5/8 2.81 0.84 0.75
5-PD5 3/8 9/16 2.94 0.77 0.69
5-PD7 3/8 5/8 2.94 0.84 0.75
5-PD9 3/8 11/16 2.94 0.91 0.81
5-PD11 3/8 3/4 2.94 0.98 0.88
5-PD13 3/8 13/16 2.94 1.05 0.94
5-PD15 3/8 7/8 2.94 1.12 1.00
5-PP13 1/2 13/16 3.62 1.05 0.94
5-PP15 1/2 7/8 3.62 1.12 1.00
5-PP17 1/2 15/16 3.62 1.19 1.06
5-PP19 1/2 1 3.62 1.26 1.13
5-PR23 3/4 11/8 3.75 1.40 1.25
5-PR25 3/4 13/16 3.75 1.47 1.31
5-PR27 3/4 11/4 3.75 1.54 1.38
.With Bleeder Ball Check C Reduces hose whip when disconnecting.
How to build a socket part number with options:
Example: 5000 - BV - SL - 143
Seal Material:
143 = Viton
192 = EPDM
Standard Part Number
from Socket Tables Above
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
Valve Material:
BV = Brass
LLV = 303 Stainless Steel
SL = Sleeve Lock
Series 6000 3/4 Nominal
SOCKETS PLUGS
Male End Connections
Part No. Thread Dimensions
Brass Size A B HEX
6300 1/2-14 NPTF 2.94 1.88 1.31
6500 3/4-14 NPTF 2.94 1.88 1.31
6700 1-111/2 NPTF 3.13 1.88 1.31
Part No. Thread Dimensions
Steel Size C D HEX
64A 1/2-14 NPTF 2.31 1.15 1.00
64GA. 1/2-14 NPTF 3.26 1.12 1.00
66A 3/4-14 NPTF 2.38 1.23 1.06
66GA. 3/4-14 NPTF 3.26 1.19 1.06
68A 1-111/2 NPTF 2.56 1.52 1.31
Brass
B-64A 1/2-14 NPTF 2.31 1.12 1.00
B-66A 3/4-14 NPTF 2.38 1.19 1.06
Female End Connections
Part No. Thread Dimensions
Steel Size C D HEX
65A 1/2-14 NPTF 2.22 1.15 1.00
65GA. 1/2-14 NPTF 3.35 1.12 1.00
67A 3/4-14 NPTF 2.22 1.37 1.19
67GA. 3/4-14 NPTF 3.38 1.33 1.19
69A 1-111/2 NPTF 2.41 1.80 1.56
Part No. Thread Dimensions
Brass Size A B HEX
6200 1/2-14 NPTF 2.85 1.88 1.31
6400 3/4-14 NPTF 3.00 1.88 1.31
6600 1-111/2 NPTF 3.19 1.88 1.56
Hose Stem End Connections
Part No. Hose Dimensions
Brass I.D. A B
6800 1/2 3.21 1.88
6900 3/4 4.06 1.88
7000 1 4.07 1.88
Part No. Dimensions
Steel Hose I.D. C D
70A 1/2 2.53 0.94
70GA. 1/2 3.53 1.12
71A 3/4 3.44 1.06
71GA. 3/4 4.38 1.12
72A 1 3.44 1.31
Brass
B-71A 3/4 3.44 1.06
.With Bleeder Ball Check C Reduces hose whip when disconnecting.
How to build a socket part number with options:
Example: 6000 - BV - SL - 143
Standard Part Number
from Socket Tables Above
Seal Material:
143 = Viton
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
Valve Material:
BV = Brass
SL = Sleeve Lock
All dimensions in inches.
Series P-30 & P-40
Industrial Interchange
Industrial Interchange Plastic Quick Connect Couplings designed for compressed air. Body sizes are 1/4 and 3/8.
Features
. Plastic socket body and plug
. Light-weight
. Less likely to damage painted or easily dented surfaces than
metal couplings
. Easy, automatic, push-to-connect design provides instantaneous connection and disconnection of lines, plus automatic shut-off of socket end of line
. 1/4 socket accepts MIL-C-4109 plugs
Standard Materials
. Socket
- Acetal Body
- Polypropylene Sleeve
- Zinc Plated Steel Valve
- Buna-N (Nitrile) Seal
- Stainless Steel Springs
. Plug
- Acetal
- Series P-30 accepts all
Series 3000 plugs
- Series P-40 accepts all Series 4000 plugs
Flow Capacity
Series . Ac
P-30 28
P-40 45
Rated Pressure
Series Size PSI BAR
P-30 1/4 150 10
P-40 3/8 150 10
* At temperatures up to 125
. Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure
Sockets Plugs
Male End Connections
Hose Stem End Connections
Dimensions
Part No. Hose I.D. A B
P4-30S-25H 1/4 2.66 1.25 P7-40S-37H 3/8 2.82 1.44
Thread Dimensions
Part No. Size C D HEX
P4-30P-25M 1/4-18 NPTF 1.75 0.65 0.56
P7-40P-37M 3/8-18 NPTF 1.88 0.79 0.69
Series AUTO-FLO 23 & 24
1/4 Nominal
ARO 210 Interchange Plug
Auto-Flo 24 Socket
Industrial Interchange Plug
Auto-Flo 23 Socket
Auto-Flo 24 Plug
Tru-Flate Interchange Plug
High .ow, automatic Quick-Connect Couplings designed for use with compressed air.
See page 9 for One-Way Plug
Interchange Chart.
Features
. Auto-Flo 23 is the .rst automatic universal coupling designed to operate with Industrial, ARO 210 and Tru-Flate Interchange plugs
. Auto-Flo 24 operates with CEJN 320 and Rectus 25 Interchange plugs
. Easy, automatic, push-to-connect
design provides instantaneous connection and disconnection of lines, plus automatic shut-off of socket end of line
. Sleeve guard protects against accidental disconnection
Standard Materials
. Socket
- Brass Body
- Brass Valve
- Zinc Plated Steel Sleeve
- Buna-N (Nitrile) Seals
- Stainless Steel Springs
- Stainless Steel Locking Balls
. Plug
- Industrial Interchange (Series 3000) . Zinc Plated Case-Hardened Steel
. Brass
. Stainless Steel
- ARO 210, Tru-Flate and CEJN/Rectus Interchanges
. Zinc Plated Case-Hardened Steel
Pressure Ratings
Series PSI BAR
Auto-Flo 23 150 10
Auto-Flo 24 150 10
Flow Capacities
Plug Interchange . Ac
Industrial 32
ARO 210 32
Tru-Flate 30
Auto-Flo 24 45
. Air .ow (scfm) with 5 psi pressure drop
and 100 psig inlet pressure
Series AUTO-FLO 23 & 24
1/4 Nominal
SOCKETS Auto-Flo 23 PLUGS
Male End Connections
Thread Dimensions
Part No. Size A B HEX
B23AS-25M 1/4-18 NPTF 2.23 0.94 0.81 B23AS-25MBST 1/4-19 BSPT 2.23 0.94 0.81 B23AS-37M 3/8-18 NPTF 2.23 0.94 0.81
B23AS-37MBST 3/8-19 BSPT 2.23 0.94 0.81
B23AS-50MBST 1/2-14 BSPT 2.23 0.94 0.88
Part No. Thread Dimensions
Steel Size C D HEX
INDUSTRIAL INTERCHANGE (Series 3000, page 15)
2607 1/8-27 NPTF 1.42 0.58 0.50 2608 1/4-18 NPTF 1.68 0.65 0.56 2608B 1/4-19 BSPT 1.68 0.65 0.56
20AP-37M 3/8-18 NPTF 1.68 0.79 0.69 ARO 210 INTERCHANGE
21AP-25M 1/4-18 NPTF 1.65 0.65 0.56
21AP-37M 3/8-18 NPTF 1.65 0.79 0.69
Tru-Flate INTERCHANGE
Female End Connections
Part No. Thread Dimensions
Steel Size C D HEX
INDUSTRIAL INTERCHANGE (Series 3000, page 15)
2609 1/4-18 NPTF 1.55 0.79 0.69 2609B 1/4-19 BSPP 1.55 0.79 0.69
20AP-37F 3/8-18 NPTF 1.61 0.94 0.81
ARO 210 INTERCHANGE
21AP-25F 1/4-18 NPTF 1.53 0.79 0.69
21AP-37F 3/8-18 NPTF 1.59 0.94 0.81
Tru-Flate INTERCHANGE
Thread Dimensions
Part No. Size A B HEX
B23AS-25F 1/4-18 NPTF 2.02 0.94 0.81 B23AS-25FBS 1/4-19 BSPP 2.02 0.94 0.81 B23AS-37F 3/8-18 NPTF 2.02 0.94 0.81 B23AS-37FBS 3/8-19 BSPP 2.02 0.94 0.81
B23AS-50FBS 3/8-14 BSPP 2.34 0.94 1.06
Hose Stem End Connections
Part No. Dimensions
Steel Hose I.D. C D
INDUSTRIAL INTERCHANGE (Series 3000, page 15)
3946 1/4 2.14 0.50
3947 5/16 2.14 0.50
22238 3/8 2.14 0.50
ARO 210 INTERCHANGE
21AP-25H 1/4 2.12 0.50
21AP-37H 3/8 2.12 0.50
Tru-Flate INTERCHANGE
Dimensions
Part No. Hose I.D. A B
B23AS-25H 1/4 2.76 0.94 B23AS-31H 5/16 2.73 0.94 B23AS-37H 3/8 2.73 0.94
B23AS-50H 1/2 2.70 0.94
Series AUTO-FLO 23 & 24
1/4 Nominal
SOCKETS Auto-Flo 24 PLUGS
Male End Connections
Part No. Thread Dimensions
Steel Size C D HEX
24AP-25MG 1/4-18 NPTF 1.64 0.65 0.56 24AP-25MBST 1/4-19 BSPT 1.62 0.65 0.56
24AP-37MBST 3/8-19 BSPT 1.62 0.79 0.69 24AP-50MBST 1/2-14 BSPT 1.88 1.01 0.88
Part No. Thread Dimensions
Brass Size A B HEX
B24AS-25M 1/4-18 NPTF 2.27 0.94 0.81 B24AS-25MBST 1/4-19 BSPT 2.27 0.94 0.81
B24AS-37MBST 3/8-19 BSPT 2.27 0.94 0.81
B24AS-50MBST 1/2-14 BSPT 2.27 0.94 0.88
Female End Connections
Part No. Thread Dimensions
Steel Size C D HEX
24AP-25FG 1/4-18 NPTF 1.49 0.79 0.69 24AP-25FBS 1/4-19 BSPP 1.46 0.79 0.69
24AP-37FBS 3/8-19 BSPP 1.52 0.94 0.81 24AP-50FBS 1/2-14 BSPP 1.65 1.23 1.06
Part No. Thread Dimensions
Brass Size A B HEX
B24AS-25F 1/4-18 NPTF 2.06 0.94 0.81 B24AS-25FBS 1/4-19 BSPP 2.06 0.94 0.81
B24AS-37FBS 3/8-19 BSPP 2.06 0.94 0.81
B24AS-50FBS 1/2-14 BSPP 2.38 0.94 1.06
Hose Stem End Connections
Part No. Dimensions
Brass Hose I.D. A B
B24AS-25H 1/4 2.80 0.94 B24AS-31H 5/16 2.77 0.94
B24AS-37H 3/8 2.77 0.94
B24AS-50H 1/2 2.74 0.94
Part No. Dimensions
Steel Hose I.D. C D
24AP-25H 1/4 2.08 0.50 24AP-31H 5/16 2.08 0.50
24AP-37H 3/8 2.08 0.50 24AP-50H 1/2 2.08 0.63
Series SAFELINE
1/4 Industrial Interchange
Male End Connections
The SAFELINE Industrial Interchange pushbutton safety coupling is designed for use with compressed air.
Features
. Safe and easy to connect and disconnect. Two-step disconnect procedure shuts off air supply and releases downstream air pressure before plug can be removed from socket. Hose whip is prevented.
. Light weight, compact ergonomic design
. Accepts 1/4 MIL-C-4109 plugs
Operation
. To connect: Push plug into socket
. To disconnect: (1) Push button on side of socket. Air supply is shut off and plug pops out 3/16 inch, but is not released from socket. Downstream air is vented. (2) Push plug into socket to release latch. Pull plug from socket.
Standard Materials
. Socket
- Aluminum and steel construction
- Buna-N (Nitrile) Seals
. Plug: Use Series 3000 Plugs
Thread Dimensions
Part No. Thread Size A B HEX
GD 10536 41 1/4-18 NPTF 3.18 1.02 0.67
GD 10536 83 3/8-18 NPTF 3.18 1.02 0.75
Female End Connections
Thread Dimensions
Part No. Thread Size A B HEX
GD 10526 41 1/4-18 NPTF 2.97 1.02 0.67
GD 10526 83 3/8-18 NPTF 3.18 1.02 0.87
Hose Stem End Connections
Dimensions
Part No. Hose I.D. A B
GD 10556 67 1/4 3.56 1.02
GD 10556 01 3/8 3.56 1.02
Flow Capacity
Series . Ac
GD 10500 20
Rated Pressure
Series PSI Bar
GD 10500 232 16
. Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure
Series 180 & 280
1/8 Nominal
Miniature Ball Lock Quick-Connect Couplings designed for use with compressed air, gases and liquids.
Features
. Ball lock
. Manual operation
. Series 180 and 280 sockets mate with all Series 180 plugs
. Series 180 socket has a tire valve.
Series 280 socket has a 1-HK valve, which provides higher .ow capacity.
. Viton seals available as an option.
Add -143 suf.x to socket part number when ordering.
Standard Materials
. Socket
- Brass Body and Sleeve
- Valve
180: Nickel Plated Brass Tire Valve 280: Brass Series 1-HK Valve
- Buna-N (Nitrile) Seals
- Stainless Steel Springs
- Stainless Steel Locking Balls
. Plug
- Brass
Rated Pressure
Series PSI BAR
180 700 48
280 3,000 207
Flow Capacity
Series . Ac
180 2.5
280 10.0
. Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure
SOCKETS PLUGS
Male End Connections
Part No. Thread Dimensions
Brass Size A B HEX
180 1/8-27 NPTF 1.41 0.63 0.56
28S-25M 1/4-18 NPTF 1.38 0.63 0.56
Part No. Thread Dimensions
Brass Size C D HEX
185 1/8-27 NPTF 1.16 0.49 0.44 186 1/4-18 NPTF 1.44 0.63 0.56
Female End Connections
Part No. Thread Dimensions
Brass Size A B HEX
28S-12F 1/8-27 NPTF 1.78 0.63 0.56
Part No. Thread Dimensions
Brass Size C D HEX
183 1/8 NPTF 1.19 0.63 0.56
Hose Stem End Connections
Part No. Hose Dimensions
Brass I.D. C D
187 1/8 1.25 0.38
189 3/16 1.50 0.38
189
187
All dimensions in inches.
Series 600 & 700
1/4 Nominal
Series 700 Series 600
Quick-Connect Couplings designed for use in oxyacetylene service. Series 600 is used with oxygen. Series 700 is used with acetylene.
Features
. Ball lock
. Manual operation
. Non-interchangeable designs
prevent crossing of lines
. Sleeves are color coded to identify each series:
- Series 600 sleeves are green
for oxygen
- Series 700 sleeves are red
for acetylene
. Socket part numbers with the pre.x UL are UL listed for their intended usage
. Sockets having part numbers with the UL pre.x or SL suf.x have the sleeve lock feature to prevent accidental disconnection
. Sockets with hose connections cannot be UL listed
. Series 600 and 700 couplings can also be used with compressed air and other gases
Standard Materials
. Socket
- Brass Body
- Brass Valve
- Painted Brass Sleeve
Green - Series 600
Red - Series 700
- Buna-N (Nitrile) Seal
- Stainless Steel Springs
- Stainless Steel Locking Balls
. Plug
- Brass
Accessories
. Dust caps and dust plugs
(See page 68)
Rated Pressure
Series PSI BAR
600 & 700 1,500 103
Flow Capacity
Series . Ac
600 & 700 20
. Air .ow (scfm) with 5 psi pressure
drop and 100 psig inlet pressure
Series 600
1/4 Nominal
SOCKETS PLUGS
Male End Connections
Part No. Thread Dimensions
Brass Size C D HEX
01A 1/8-27 NPTF 1.41 0.63 0.56 03A 1/4-18 NPTF 1.56 0.63 0.56 04-R 9/16-18. 1.41 0.63 0.56
Part No. - Brass Thread Dimensions
Standard Oxygen Serv. Size A B HEX
GR-601 UL-601 1/8-27 NPTF 1.94 1.00 0.69 GR-603 UL-603 1/4-18 NPTF 2.09 1.00 0.69 GR-604R UL-604R 9/16-18. 1.97 1.00 0.69 GR-605 UL-605 3/8-18 NPTF 2.09 1.00 0.69
Female End Connections
Part No. - Brass Thread Dimensions
Standard Oxygen Serv. Size A B HEX
GR-600 UL-600 1/8-27 NPTF 1.78 1.00 0.69
GR-602 UL-602 1/4-18 NPTF 2.00 1.00 0.69
GR-604 UL-604 3/8-18 NPTF 2.06 1.00 0.69
GR-605R UL-605R 9/16-18. 2.00 1.00 0.69
Part No. Thread Dimensions
Brass Size C D HEX
00A 1/8-27 NPTF 1.22 0.63 0.56 02A 1/4-18 NPTF 1.41 0.77 0.69 05-R 9/16-18. 1.38 0.77 0.69
Hose Stem End Connections
Part No. - Brass Hose Dimensions
Standard Oxygen Serv. I.D. A B
GR-606 GR-606-SL 1/4 2.53 1.00
GR-606P GR-606P-SL 1/4 2.31 1.00
GR-607 GR-607-SL 5/16 2.53 1.00
GR-608 GR-608-SL 3/8 2.52 1.00
GR-608P 3/8 2.41 1.00
Part No. Dimensions
Brass Hose I.D. C D
07A 1/4 2.03 0.56
08A 5/16 2.03 0.56
09A 3/8 2.04 0.56
Hose Clamp End Connections
Part No. - Brass Hose Dimensions
Standard Oxygen Serv. I.D. O.D. A B HEX
GR-6-0A3 3/16 1/2 2.56 1.00 0.63 GR-6-0B3 GR-6-0B3-SL 1/4 1/2 2.62 1.00 0.63 GR-6-0B5 GR-6-0B5-SL 1/4 9/16 2.62 1.00 0.69 GR-6-0B7 GR-6-0B7-SL 1/4 5/8 2.62 1.00 0.75 GR-6-0C5 5/16 9/16 2.69 1.00 0.69 GR-6-0C7 5/16 5/8 2.69 1.00 0.75 GR-6-0C9 5/16 11/16 2.69 1.00 0.81 GR-6-0D7 3/8 5/8 2.75 1.00 0.75 GR-6-0D9 3/8 11/16 2.75 1.00 0.81 GR-6-0D11 3/8 3/4 2.75 1.00 0.88
Part No. Hose Dimensions
Brass I.D. O.D. C D HEX
6-B3 1/4 1/2 2.13 0.70 0.63 6-B5 1/4 9/16 2.13 0.77 0.69 6-B7 1/4 5/8 2.13 0.84 0.75 6-B9 1/4 11/16 2.13 0.91 0.81 6-D5 3/8 9/16 2.25 0.77 0.69 6-D7 3/8 5/8 2.25 0.84 0.75 6-D9 3/8 11/16 2.25 0.91 0.81 6-D11 3/8 3/4 2.25 0.98 0.88
*45 Male Flare .R.H. Thread - 30 Female Flare .R.H. Thread - Inverted Flare For use with push-on style hose.
Fittings
Oxygen AdaptersBrass Pipe-to-Pipe AdaptersBrass Swivel Nut Hose Clamps
9/16C18 Right-Hand Thread for Oxygen Service
Part No. I.D. Hose O.D. Hose
4RA0 3/16 7/16
4RA3 3/16 1/2
4RB1 1/4 15/32
4RB3 1/4 1/2
4RB5 1/4 9/16
4RB7 1/4 5/8
4RD7 3/8 5/8
4RD9 3/8 11/16
4RD11 3/8 3/4
Part No. Connection
18-MAM 1/8 MPT x 1/4 MPT
19-MBM 1/4 MPT x 1/4 MPT
20-MBM 1/4 MPT x 3/8 MPT
Part No. Connection
9-MBR 1/4 MPT x 9/16C18 RHT
Series UL-600 couplings are not to be used with oxygen at pressures exceeding 100 psig in order to comply with
UL listings.
Series UL-600 and UL-700 Couplings with sleeve lock feature comply with O.S.H.A. requirements, Sec. 1915.35 (f)(5), 1916.35 (f)(5), 1917.35 (f)(5), and 1926.350 (f)(5); and are Underwriters Laboratories, Inc. listed for use with oxy-acetylene welding and cutting apparatus, .le SA 1296.
Oxygen increases combustibility. Fire and explosion could occur causing severe bodily injury or death. Be sure to select the proper coupling for your application and use it only within the speci.ed service pressure range.
All dimensions in inches.
Series 700
1/4 Nominal
SOCKETS PLUGS
Male End Connections
Part No. Thread Dimensions
Brass Size C D HEX
A1 1/8-27 NPTF 1.47 0.63 0.56 A3P 1/4-18 NPTF 1.63 0.63 0.56 A4-L 9/16-18. 1.50 0.63 0.56
Part No. - Brass Thread Dimensions
Standard Acetyl. Serv. Size A B HEX
RD-701 1/8-27 NPTF 1.94 1.00 0.69 RD-703 UL-703 1/4-18 NPTF 2.09 1.00 0.69 RD-704L UL-704L 9/16-18. 1.97 1.00 0.69 RD-705 UL-705 3/8-18 NPTF 2.09 1.00 0.69
Female End Connections
Part No. - Brass Thread Dimensions
Standard Acetyl. Serv. Size A B HEX
RD-700 UL-700 1/8-27 NPTF 1.78 1.00 0.69 RD-702 UL-702 1/4-18 NPTF 2.00 1.00 0.69 RD-704 UL-704 3/8-18 NPTF 2.06 1.00 0.69 RD-705L UL-705L 9/16-18. 2.00 1.00 0.69
Part No. Thread Dimensions
Brass Size C D HEX
A2 1/4-18 NPTF 1.46 0.77 0.69 A5-L 9/16-18. 1.38 0.77 0.69
Hose Stem End Connections
Part No. Dimensions
Brass Hose I.D. C D
A7 1/4 2.06 0.56 A8 5/16 2.06 0.56 A9 3/8 2.10 0.56
Part No. - Brass Hose Dimensions
Standard Acetyl. Serv. I.D. A B
RD-706 RD-706-SL 1/4 2.53 1.00
RD-706P 1/4 2.31 1.00
RD-707 RD-707-SL 5/16 2.53 1.00
RD-708 RD-708-SL 3/8 2.52 1.00
Hose Clamp End Connections
Part No. - Brass Hose Dimensions
Standard Acetyl. Serv. I.D. O.D. A B HEX
RD-7-0A3 3/16 1/2 2.56 1.00 0.63 RD-7-0B3 RD-7-0B3-SL 1/4 1/2 2.62 1.00 0.63 RD-7-0B5 RD-7-0B5-SL 1/4 9/16 2.62 1.00 0.69 RD-7-0B7 1/4 5/8 2.62 1.00 0.75 RD-7-0D7 3/8 5/8 2.75 1.00 0.75 RD-7-0D9 3/8 11/16 2.75 1.00 0.81 RD-7-0D11 3/8 3/4 2.75 1.00 0.88
Part No. Hose Dimensions
Brass I.D. O.D. C D HEX
7-B3 1/4 1/2 2.19 0.70 0.63 7-B5 1/4 9/16 2.19 0.77 0.69 7-B7 1/4 5/8 2.19 0.84 0.75 7-B11 1/4 3/4 2.19 0.98 0.88
.L.H. Thread - 30 Female Flare .L.H. Thread - Inverted Flare For use with push-on style hose.
Fittings
Pipe-to-Pipe AdaptersBrass Swivel Nut Hose Clamps
9/16C18 Left-Hand Thread for Acetylene Service
Part No. Connection
18-MAM 1/8 MPT x 1/4 MPT
19-MBM 1/4 MPT x 1/4 MPT
20-MBM 1/4 MPT x 3/8 MPT
Part No. I.D. Hose O.D. Hose
4LA0 3/16 7/16
4LA3 3/16 1/2
4LB3 1/4 1/2
4LB5 1/4 9/16
Series UL-700 couplings are not to be used with acetylene at pressures exceeding 15 psig in order to comply with
UL listings.
Series UL-600 and UL-700 Couplings with sleeve lock feature comply with O.S.H.A. requirements, Sec. 1915.35 (f)(5), 1916.35 (f)(5), 1917.35 (f)(5), and 1926.350 (f)(5); and are Underwriters Laboratories, Inc. listed for use with oxyacetylene welding and cutting apparatus,
.le SA 1296.
Acetylene is combustible. Fire and explosion could occur causing severe bodily injury or death. Be sure to select the proper coupling for your application and use it only within the specified service pressure range.
All dimensions in inches.
Series 2RL & 3RL
Ring-Lock Quick-Connect Couplings have a unique interchange which Hansen designed for use with com-pressed air. Body sizes are 1/4 and 3/8.
Features
. High .ow capacity
- 2RL .ow equals that of most
3/8 couplings
- 3RL .ow equals that of most 1/2 couplings
. Ring lock
. Push to connect
. Will not disconnect when hose is
dragged on the ground
. Rotate locking sleeve approximately 20 to disconnect
. Optional seal materials available
Standard Materials
. Socket
- Zinc Plated Steel Body
- Brass Socket End
- Nickel Plated Steel Sleeve - Zinc Plated Steel Valve
- Buna-N (Nitrile) Seal
- Stainless Steel Spring
- Zinc Plated Steel Locking Ring
. Plug
- Zinc Plated Case-Hardened Steel
Accessories
. Dust caps and dust plugs (See page 68)
Rated Pressure
Series Size PSI BAR
2-RL 1/4 300 20
3-RL 3/8 300 20
Flow Capacity
Series . Ac
2-RL 48
3-RL 80
. Air .ow (scfm) with 5 psi pressure drop and 100 psig inlet pressure
Series 2RL 1/4 Nominal
SOCKETS PLUGS
Male End Connections
Female End Connections
Hose Stem End Connections
Hose Clamp End Connections
Part No. Thread Dimensions
Steel Size C D HEX
2-L10 1/8-27 NPTF 1.51 0.58 0.50 2-L15 1/4-18 NPTF 1.66 0.65 0.56 2-L15G. 1/4-18 NPTF 2.64 0.77 0.69 2-L20 3/8-18 NPTF 2.04 0.79 0.69 2-L20G. 3/8-18 NPTF 2.64 0.77 0.69 2-L25 1/2-14 NPTF 2.31 1.01 0.88
Thread Dimensions
Part No. Size A B HEX
2-R10 1/8-27 NPTF 2.01 1.06 0.88 2-R15 1/4-18 NPTF 2.16 1.06 0.88 2-R20 3/8-18 NPTF 2.16 1.06 0.88 2-R25 1/2-14 NPTF 2.35 1.06 0.88
Thread Dimensions
Part No. Size A B HEX
2-R11 1/8-27 NPTF 1.91 1.06 0.88 2-R16 1/4-18 NPTF 1.91 1.06 0.88 2-R21 3/8-18 NPTF 2.16 1.06 0.88 2-R26 1/2-14 NPTF 2.43 1.06 1.00
Part No. Thread Dimensions
Steel Size C D HEX
2-L11 1/8-27 NPTF 1.36 0.65 0.56 2-L16 1/4-18 NPTF 1.54 0.79 0.69 2-L16G. 1/4-18 NPTF 2.55 0.77 0.69 2-L21 3/8-18 NPTF 1.88 0.94 0.81 2-L26 1/2-14 NPTF 2.18 1.15 1.00
Dimensions
Part No. Hose I.D. A B
2-R17 1/4 2.63 1.06
2-R195 5/16 2.63 1.06
2-R22 3/8 2.63 1.06
2-R27 1/2 2.63 1.06
Part No. Dimensions
Steel Hose I.D. C D
2-L17 1/4 2.13 0.56
2-L195 5/16 2.13 0.56
2-L22 3/8 2.13 0.56
2-L27 1/2 2.50 0.81
Hose Dimensions
Part No. I.D. O.D. A B HEX
2-R18B1 1/4 15/32 2.73 1.06 0.63 2-R18B3 1/4 1/2 2.73 1.06 0.63 2-R18B5 1/4 9/16 2.73 1.06 0.69 2-R18B7 1/4 5/8 2.73 1.06 0.75 2-R18B9 1/4 11/16 2.73 1.06 0.81 2-R18B11 1/4 3/4 2.73 1.06 0.88 2-R185C5 5/16 9/16 2.79 1.06 0.69 2-R185C7 5/16 5/8 2.79 1.06 0.75 2-R185C9 5/16 11/16 2.79 1.06 0.81 2-R23D5 3/8 9/16 2.85 1.06 0.69 2-R23D7 3/8 5/8 2.85 1.06 0.75 2-R23D9 3/8 11/16 2.85 1.06 0.81 2-R23D11 3/8 3/4 2.85 1.06 0.88 2-R23D13 3/8 13/16 2.85 1.06 0.94 2-R23D15 3/8 7/8 2.85 1.06 1.00 2-R28P13 1/2 13/16 3.48 1.06 0.94 2-R28P15 1/2 7/8 3.48 1.06 1.00
Part No. Hose Dimensions
Steel I.D. O.D. C D HEX
2-L18B1 1/4 15/32 2.23 0.70 0.63 2-L18B3 1/4 1/2 2.23 0.70 0.63 2-L18B5 1/4 9/16 2.23 0.77 0.69 2-L18B7 1/4 5/8 2.23 0.84 0.75 2-L18B9 1/4 11/16 2.23 0.91 0.81 2-L18B11 1/4 3/4 2.23 0.98 0.88 2-L185C5 5/16 9/16 2.29 0.77 0.69 2-L185C7 5/16 5/8 2.29 0.84 0.75 2-L185C9 5/16 11/16 2.29 0.91 0.81 2-L23D5 3/8 9/16 2.35 0.77 0.69 2-L23D7 3/8 5/8 2.35 0.84 0.75 2-L23D9 3/8 11/16 2.35 0.91 0.81 2-L23D11 3/8 3/4 2.35 0.98 0.88 2-L23D13 3/8 13/16 2.35 1.05 0.94 2-L23D15 3/8 7/8 2.35 1.12 1.00 2-L28P13 1/2 13/16 3.41 1.05 0.94 2-L28P15 1/2 7/8 3.41 1.12 1.00
.With Bleeder Ball Check C Reduces hose whip when disconnecting.
How to build a socket part number with options:
Example: 2-R16 - 143
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
Seal Material:
138 = Silicone
143 = Viton
192 = EPDM
Standard Part Number
from Socket Tables Above
All dimensions in inches.
Series 3RL 3/8 Nominal
Male End Connections
Female End Connections
Hose Stem End Connections
Hose Clamp End Connections
SOCKETS PLUGS
Part No. Thread Dimensions
Steel Size C D HEX
3-L10 1/8-27 NPTF 1.54 0.72 0.63 3-L15 1/4-18 NPTF 1.70 0.72 0.63
3-L15G. 1/4-18 NPTF 2.64 0.98 0.88 3-L20 3/8-18 NPTF 1.76 0.79 0.69 3-L20G. 3/8-18 NPTF 2.64 0.98 0.88 3-L25 1/2-14 NPTF 2.31 1.01 0.88 3-L25G. 1/2-14 NPTF 2.83 0.98 0.88 3-L30 3/4-14 NPTF 2.38 1.23 1.06 3-L30G. 3/4-14 NPTF 2.88 1.19 1.06
Thread Dimensions
Part No. Size A B HEX
3-R15 1/4-18 NPTF 2.34 1.31 1.00
3-R20 3/8-18 NPTF 2.35 1.31 1.00
3-R25 1/2-14 NPTF 2.54 1.31 1.00
3-R30 3/4-14 NPTF 2.54 1.31 1.06
Thread Dimensions
Part No. Size A B HEX
3-R16 1/4-18 NPTF 2.29 1.31 1.00 3-R21 3/8-18 NPTF 2.35 1.31 1.00 3-R26 1/2-14 NPTF 2.63 1.31 1.00 3-R31A 3/4-14 NPTF 2.66 1.31 1.19
Part No. Thread Dimensions
Steel Size C D HEX
3-L16 1/4-18 NPTF 1.48 0.79 0.69 3-L16G. 1/4-18 NPTF 2.39 0.98 0.88 3-L21 3/8-18 NPTF 1.63 0.94 0.81 3-L21G. 3/8-18 NPTF 2.64 0.98 0.88 3-L26 1/2-14 NPTF 2.25 1.15 1.00 3-L26G. 1/2-14 NPTF 2.91 0.98 0.88 3-L31 3/4-14 NPTF 2.25 1.37 1.19
Dimensions
Part No. Hose I.D. A B
3-R17 1/4 2.82 1.31
3-R195 5/16 2.85 1.31
3-R22 3/8 2.89 1.31
3-R27 1/2 2.81 1.31
3-R32 3/4 3.66 1.31
Part No. Dimensions
Steel Hose I.D. C D
3-L17 1/4 2.16 0.63 3-L195 5/16 2.16 0.63 3-L195G. 5/16 3.11 0.98 3-L22 3/8 2.16 0.75 3-L22G. 3/8 3.11 0.98 3-L27 1/2 2.16 0.81 3-L27G. 1/2 3.11 0.98 3-L32 3/4 3.13 1.00 3-L32G. 3/4 3.96 0.98
Part No. Hose Dimensions
Steel I.D. O.D. C D HEX
3-L23D5 3/8 9/16 2.45 0.77 0.69 3-L23D7 3/8 5/8 2.45 0.84 0.75 3-L23D9 3/8 11/16 2.45 0.91 0.81 3-L23D11 3/8 3/4 2.45 0.98 0.88 3-L23D13 3/8 13/16 2.45 1.05 0.94 3-L23D15 3/8 7/8 2.45 1.12 1.00 3-L28P13 1/2 13/16 3.14 1.05 0.94
3-L28P15 1/2 7/8 3.14 1.12 1.00 3-L28P17 1/2 15/16 3.14 1.19 1.06 3-L28P19 1/2 1 3.14 1.26 1.13
3-L33R23 3/4 11/8 3.56 1.40 1.25 3-L33R25 3/4 13/16 3.56 1.47 1.31 3-L33R27 3/4 11/4 3.56 1.54 1.38
Hose Dimensions
Part No. I.D. O.D. A B HEX
3-R23D5 3/8 9/16 3.06 1.31 0.69 3-R23D7 3/8 5/8 3.06 1.31 0.75 3-R23D9 3/8 11/16 3.06 1.31 0.81 3-R23D11 3/8 3/4 3.06 1.31 0.88 3-R23D13 3/8 13/16 3.06 1.31 0.94 3-R23D15 3/8 7/8 3.06 1.31 1.00 3-R28P13 1/2 13/16 3.66 1.31 0.94 3-R28P15 1/2 7/8 3.66 1.31 1.00 3-R28P17 1/2 15/16 3.66 1.31 1.06 3-R28P19 1/2 1 3.66 1.31 1.13 3-R33R23 3/4 11/8 3.79 1.31 1.25 3-R33R25 3/4 13/16 3.79 1.31 1.31 3-R33R27 3/4 11/4 3.79 1.31 1.38
.With Bleeder Ball Check C Reduces hose whip when disconnecting.
How to build a socket part number with options:
Example: 3-R21 - 143
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
Standard Part Number
from Socket Tables Above
Seal Material:
143 = Viton
All dimensions in inches.
TWO-WAY
TWO-WAY
33
34
HANSEN COUPLINGS
HANSEN COUPLINGS
TWO-WAY COUPLINGS
33
33
Contents and Selector Chart
Coupling Style
Body
Material
Locking Mechanism
Body Size
Options
MANUAL CONNECT
PUSH-TO- CONNECT
MINIMUM SPILL/INCLUSION
1/8 INCH
1/4 INCH
3/8 INCH
1/2 INCH
3/4 INCH
1 INCH
1. INCH
1. INCH
2. INCH
BRASS
STEEL (Zinc/Chromate Finish)
STAINLESS STEEL (303)
STAINLESS STEEL (316)
PLASTIC (Polypropylene)
BALL LOCK
THREADED SLEEVE
PLASTIC FINGERS
SLEEVE LOCK
SEAL MATERIALS (Various)
DUST CAP/PLUG
Coupling
Series Page
1-HK 35 . . . . . . . . . .
2-HK 35 . . . . . . . . . .
P2-HK 35 . . . . . .
3-HK 35 . . . . . . . . . .
4-HKP 35 . . . . . . . . . .
6-HKP 35 . . . . . . . . . .
8-HKP 35 . . . . . . . . . .
10-HK 38 . . . . . . . .
12-HK 38 . . . . . . . . .
20-HK 38 . . . . . . . . .
HA 15000 40 . . . . . . . . .
FF 42 . . . . . . . . . . .
96 44 . . . . . . .
UP 45 . . . . .
WA 56000 46 . . . . . .
2-HKIG 48 . . . . . .
2-HKIL 48 . . . . . .
4-DB 49 . . . . . .
8-DB 49 . . . . . .
WA 10000 50 . . . . . . . . .
Sleeve lock is standard.
Series HK ISO 7241-1 Series B
Series 1-HK to 8-HKP
Series 10-HK, 12-HK & 20-HK
Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases and vacuum. Series HK couplings conform to the dimensional requirements of ISO 7241-1 Series B. Body sizes range from 1/8" to 2.".
Features
. Brass, steel and stainless steel construction
available in all sizes; polypropylene available in 1/4" body size
. End connections are female NPTF, BSPP and SAE o-ring boss
. UL listed couplings for use on LP gas fueled lift trucks and tractors available in 1/8", 1/4" and 3/8" body sizes
. Heavy duty steel couplings for use in high impulse service available in most sizes
. Steam coupling available in 3/8" body size
Standard Materials
. Brass, zinc-plated steel, stainless steel and polypropylene (1/4" only) construction
. Stainless steel springs, balls and retaining rings
. Buna-N (Nitrile) seals
. Te.on back-up rings in 1-HK through 8-HKP steel and stainless steel sockets
Options
. Non-valved socket and plug
. Valve actuator in socket or plug
. Bleeder-style plug
. Sleeve lock
. Seals: Te.on, Neoprene,Viton, Buna-N, EPDM and Kalrez (See Elastomer Selection Guide, page 71)
Accessories
. Dust caps and dust plugs
(See page 68)
. Release clamp with chain
Rated Pressure and Flow Capacity
Brass Steel Stainless Steel
Series Body Size PSI BAR PSI BAR PSI BAR
1-HK 1/8" 3,000 207 4,000 275 5,000 344
2-HK 1/4" 2,700 186 5,000 345 3,700 255
*P2-HK 1/4" 50 4 (+35F to 150F)
3-HK 3/8" 2,200 152 3,700 255 3,700 255
4-HKP 1/2" 2,250 155 5,000 345 4,250 293
6-HKP 3/4" 2,000 138 4,000 275 3,500 242
8-HKP 1" 1,500 103 4,000 275 2,500 173
10-HK 1." 1,200 83 1,700 118 1,700 118
12-HK 1." 1,500 104 2,200 152 2,200 152
20-HK 2." 700 49 1,500 104 1,500 104
* Polypropylene Construction
Series 1-HK to 8-HK
ISO 7241-1 Series B
SOCKETS
Body Dimensions (inches)
Size Brass Steel Stainless Steel Thread Size (female) Across
(inch) Standard UL Listed Standard High Impulse 303 316 NPTF BSPP SAE A B Flats
1/8 B1-H11 UL1-H11 1-H11 LL1-H11 ML1-H11 1/8-27 1.91 0.98 0.56
1/8 1-H4 LL1-H4 7/16-20 2.06 0.98 0.69
1/4 B2-H16 UL2-H16 2-H16 2-H16C LL2-H16 ML2-H16 1/4-18 2.26 1.17 0.75
1/4 B2-H16BS 2-H16BS LL2-H16BS ML2-H16BS 1/4-19 2.26 1.17 0.75
1/4 2-H6 2-H6C LL2-H6 9/16-18 2.40 1.17 0.88
3/8 B3-H21 UL3-H21 3-H21 3-H21C LL3-H21 ML3-H21 3/8-18 2.56 1.42 0.88
3/8 B3-H21BS 3-H21BS LL3-H21BS ML3-H21BS 3/8-19 2.56 1.42 0.88
3/8 3-H8 3-H8C LL3-H8 3/4-16 2.74 1.42 1.00
1/2 B4-HP26 4-HP26 4-HP26 LL4-HP26 ML4-HP26 1/2-14 2.96 1.86 1.13
1/2 B4-HP26BS 4-HP26BS 4-HP26BS LL4-HP26BS ML4-HP26BS 1/2-14 2.96 1.86 1.13
1/2 4-HP10 4-HP10 LL4-HP10 7/8-14 3.05 1.86 1.25
3/4 B6-HP31 6-HP31 6-HP31 LL6-HP31 ML6-HP31 3/4-14 3.48 2.22 1.31
3/4 B6-HP31BS 6-HP31BS 6-HP31BS LL6-HP31BS ML6-HP31BS 3/4-14 3.48 2.22 1.31
3/4 6-HP12 6-HP12 LL6-HP12 11/16-12 3.67 2.22 1.38
1 B8-HP36 8-HP36 8-HP36 LL8-HP36 ML8-HP36 1-111/2 4.13 2.61 1.75
1 B8-HP36BS 8-HP36BS 8-HP36BS LL8-HP36BS ML8-HP36BS 1-11 4.13 2.61 1.75
1 8-HP16 8-HP16 LL8-HP16 15/16-12 4.13 2.61 1.88
A = Overall Length B = Maximum Diameter
PLUGS
Body
Size Brass Steel Stainless Steel Thread Size (female) Dimensions (inches)
(inch) Standard UL Listed Standard High Impulse 303 316 NPTF BSPP SAE C D E HEX
1/8 B1-K11 UL1-K11 1-K11 LL1-K11 ML1-K11 1/8-27 1.26 0.65 0.44 0.56
1/8 1-K4 LL1-K4 7/16-20 1.41 0.79 0.59 0.69
1/4 B2-K16 UL2-K16 2-K16 2-K16C LL2-K16 ML2-K16 1/4-18 1.52 0.87 0.56 0.75
1/4 B2-K16BS 2-K16BS LL2-K16BS ML2-K16BS 1/4-19 1.52 0.87 0.56 0.75
1/4 2-K6 2-K6C LL2-K6 9/16-18 1.66 1.01 0.70 0.88
3/8 B3-K21 UL3-K21 3-K21 3-K21C LL3-K21 ML3-K21 3/8-18 1.76 1.01 0.61 0.88
3/8 B3-K21BS 3-K21BS LL3-K21BS ML3-K21BS 3/8-19 1.76 1.01 0.61 0.88
3/8 3-K8 3-K8C LL3-K8 3/4-16 1.94 1.15 0.79 1.00
1/2 B4-KP26 4-KP26 4-KP26 LL4-KP26 ML4-KP26 1/2-14 2.03 1.30 0.76 1.13
1/2 B4-KP26BS 4-KP26BS 4-KP26BS LL4-KP26BS ML4-KP26BS 1/2-14 2.03 1.30 0.76 1.13
1/2 4-KP10 4-KP10 LL4-KP10 7/8-14 2.11 1.37 0.84 1.19
3/4 B6-KP31 6-KP31 6-KP31 LL6-KP31 ML6-KP31 3/4-14 2.36 1.52 0.71 1.31
3/4 B6-KP31BS 6-KP31BS 6-KP31BS LL6-KP31BS ML6-KP31BS 3/4-14 2.36 1.52 0.71 1.31
3/4 6-KP12 6-KP12 LL6-KP12 11/16-12 2.54 1.59 0.89 1.38
1 B8-KP36 8-KP36 8-KP36 LL8-KP36 ML8-KP36 1-111/2 2.85 1.88 0.97 1.63
1 B8-KP36BS 8-KP36BS 8-KP36BS LL8-KP36BS ML8-KP36BS 1-11 2.85 1.88 0.97 1.63
1 8-KP16 8-KP16 LL8-KP16 15/16-12 2.85 2.17 0.97 1.88
C = Overall Length D = Maximum Diameter E = Exposed Length when Connected
All dimensions in inches.
Series 1-HK to 8-HK
ISO 7241-1 Series B
Series P2-HK Plastic Coupling
The Series P2-HK coupling is intended for use with air, water and various chemicals at low pressure. It is designed for use where an economical, light weight, corrorion resistant coupling is desired. All components, except springs and seals, are molded from natural polypropylene with a UV inhibitor. Valve springs are 316 stainless steel. Viton seals are standard. EPDM (192) seals are optional.
Socket Plug
Thread Size Dimensions
Part No. NPTF C D E HEX
PP2-K25F 1/4-18 1.65 1.01 0.67 0.88
Thread Size Dimensions
Part No. NPTF A B HEX
PP2-H25F 1/4-18 2.38 1.45 0.88
Series 3-HK Steam Coupling
The Hansen Steam Coupling has a large diameter .ange on the sleeve to aid gripping while the user wears heavy gloves.
EPDM (192) seals are standard, and can be used with steam at temperatures up to 350F. Options are BSPP threads, sleeve lock, EPDM (236) seals, for use with steam at temperatures above 350F, and Viton (143) seals.
Socket Plug
Thread Size Dimensions
Part No. NPTF C D E HEX
B3-K21-192 3/8-18 1.76 1.01 0.61 0.88
Dimensions
Thread Size Across
Part No. NPTF A B Flats
B3-H21Y 3/8-18 2.56 1.75 0.88
Release Clamp with Chain
When .uid lines may be subjected to a damaging pull, couplings can be mounted to disconnect automatically, sealing both ends of a line against .uid loss. The socket sleeve can be anchored to a stationary bracket, either directly or with a chain. Excessive pull on the plug end of the line moves the socket body forward relative to the sleeve, and the plug is released without damage to the line. Release Clamp Assembly Kits are available for Series 1-HK through 8-HKP sockets.
Series Kit Part No.
1-HK 1-HRC-K 2-HK 2-HRC-K 3-HK 3-HRC-K 4-HKP 4-HRC-K 6-HKP 6-HRC-K 8-HKP 8-HRC-K
Bleeder-Style Plugs
Bleeder-style plugs can be used on air lines to prevent hose whip when disconnecting a line by reducing the exhaust velocity of air. Bleeder-style plugs can be used on hydraulic lines to prevent static pressure from building up in disconnected lines. Valves of these plugs are manufactured such that a small leak path exists when the plug is disconnected. Bleeder-style plugs are available in Series
1-HK through 6-HKP.
Series Plug Part No.
1-HK B1-K11-VB 2-HK B2-K16-VB 2-HK 2-K16C-VB 3-HK B3-K21-VB 3-HK 3-K21-VB 3-HK 3-K21C-VB 4-HKP 4-KP26-VB 6-HKP B6-KP31-VB 6-HKP 6-KP31-VB
Series 10-HK/12-HK/20-HK
ISO 7241-1 Series B
SOCKETS
Body
Size Steel 303 Stainless Thread Size (female) Dimensions (inches)
(inch) Brass Standard High Impulse Steel NPTF BSPP A B HEX
11/4 B10-H41 10-H41 LL10-H41 11/4-111/2 4.51 2.73 2.38
11/4 10-H41BS LL10-H41BS 11/4-11 4.51 2.73 2.38
11/2 B12-H41 12-H41 12-H41C LL12-H41 11/4-111/2 4.82 3.23 2.38
11/2 B12-H41BS 12-H41BS LL12-H41BS 11/4-11 4.82 3.23 2.38
11/2 B12-H46 12-H46 12-H46C LL12-H46 11/2-111/2 4.82 3.23 2.38
11/2 B12-H46BS 12-H46BS LL12-H46BS 11/2-11 4.82 3.23 2.38
21/2 B20-H51 20-H51 20-H51C LL20-H51 2-111/2 5.55 4.11 3.75
21/2 B20-H51BS 20-H51BS LL20-H51BS 2-11 5.55 4.11 3.75
21/2 B20-H56 20-H56 20-H56C LL20-H56 21/2-8 6.14 4.11 3.75
21/2 B20-H56BS 20-H56BS LL20-H56BS 21/2-11 6.14 4.11 3.75
21/2 B20-H61 20-H61 20-H61C LL20-H61 3-8 7.00 4.11 4.00
21/2 B20-H61BS 20-H61BS LL20-H61BS 3-11 7.00 4.11 4.00
A = Overall Length B = Maximum Diameter
PLUGS
Body
Size Steel 303 Stainless Thread Size (female) Dimensions (inches)
(inch) Brass Standard High Impulse Steel NPTF BSPP C D E HEX
11/4 B10-K41 10-K41 LL10-K41 11/4-111/2 4.25 2.73 2.33 2.38
11/4 10-K41BS LL10-K41BS 11/4-11 4.25 2.73 2.33 2.38
11/2 B12-K41 12-K41 12-K41C LL12-K41 11/4-111/2 4.76 3.02 2.67 2.38
11/2 B12-K41BS 12-K41BS LL12-K41BS 11/4-11 4.76 3.02 2.67 2.38
11/2 B12-K46 12-K46 12-K46C LL12-K46 11/2-111/2 4.76 3.02 2.67 2.38
11/2 B12-K46BS 12-K46BS LL12-K46BS 11/2-11 4.76 3.02 2.67 2.38
21/2 B20-K51 20-K51 20-K51C LL20-K51 2-111/2 5.49 4.31 2.97 3.75
21/2 B20-K51BS 20-K51BS LL20-K51BS 2-11 5.49 4.31 2.97 3.75
21/2 B20-K56 20-K56 20-K56C LL20-K56 21/2-8 6.08 4.31 3.56 3.75
21/2 B20-K56BS 20-K56BS LL20-K56BS 21/2-11 6.08 4.31 3.56 3.75
21/2 B20-K61 20-K61 20-K61C LL20-K61 3-8 6.94 4.31 4.42 4.00
21/2 B20-K61BS 20-K61BS LL20-K61BS 3-11 6.94 4.31 4.42 4.00
C = Overall Length D = Maximum Diameter E = Exposed Length when Connected
**ISO 7241-1 Series B does not include 1-1/4 inch body size couplings; therefore, Hansen Series 10-HK is not covered by this standard
All dimensions in inches.
Series HK
Special Ordering Instructions
How to build a socket or plug part number with options:
Example: 4-HP26 - VAA - SL - 143
Standard Part Number
from Part Number Tables
Seal Material:
115 = Te.on5
118 = Neoprene
143 = Viton
146 = Buna-N6
192 = EPDM
235 = Kalrez7
236 = EPDM (350F+ Steam)8
NV = No Valve1
VAA = Valve Actuator Assembly2
VB = Bleeder Valve (Plugs Only)3
SL = Sleeve Lock (Sockets Only)4
Notes:
1) The NV option should be speci.ed for a socket and a plug when a non-valved coupling is desired. Non-valved Series 1-HK through 8-HKP plugs do not contain seals. Do not specify a seal material.
2) The VAA option should be speci.ed for a socket or a plug when a one-way coupling is desired.
3) The VB option can be ordered for Series 1-HK through 6-HKP plugs to prevent pressure build-up in disconnected hydraulic lines or to reduce hose whip when disconnecting pneumatic lines.
4) The Sleeve Lock device prevents accidental disconnection. Not available on sockets with pre.x UL.
5) Series HK couplings are designed for use with elastomer seals. Te.on is not an elastomer. It is rigid and not resilient. Couplings with Te.on seals may leak and/or be dif.cult to connect. Force to connect may be reduced by heating connected couplings in hot water; then, cooling before disconnecting. Te.on seals are available for Series 1-HK through 8-HKP, except Series P2-HK.
6) The 146 seal option may be speci.ed for fuels and hydraulic .uids that are known to cause standard Buna-N seals to
swell excessively.
7) Couplings with Kalrez seals are available by special quotation.
8) The 236 seal option should be ordered for use with steam at or above 350F. The 192 seal option should be ordered for hot water above 180F and steam below 350F.
9) Some part numbers may be subject to minimum order quantities.
10) Some options may be available only by special quotation. Consult your Hansen distributor.
Series HA 15000
ISO 7241-1 Series A
The Series HA 15000 is a general purpose hydraulic and .uid transfer coupling that conforms to the dimensional requirements of
ISO 7241-1 Series A. Body sizes
are 1/4", 3/8", 1/2", 3/4" and 1".
Features
. Ball lock
. Manual connect, disconnect
. Poppet valving
. Slim pro.le
. Zinc plated steel construction
. NPTF and BSPP end connections
. Available push-to-connect socket designed for bulkhead mounting
(1/2" body size only)
Standard Materials
. Zinc-plated steel construction
. Stainless steel springs, balls and retaining rings
. Buna-N (Nitrile) seals
Accessories
. Dust caps and dust plugs (See page 69)
Rated Pressure
Body Size PSI BAR
1/4" 4,568 315
3/8" 4,568 315
1/2" 3,625 250
3/4" 3,625 250
1" 2,900 200
Series HA 15000
ISO 7241-1 Series A
SOCKETS
Body Part Thread Size Dimensions (inches)
Size Number (female) Across
(inch) (Steel) NPTF BSPP A B Flats
1/4 HA 15211 00 1/4-18 1.89 0.98 0.75
1/4 HA 15011 00 1/4-19 1.89 0.98 0.75
3/8 HA 15221 00 3/8-18 2.21 1.18 0.91
3/8 HA 15021 00 3/8-19 2.21 1.18 0.91
1/2 HA 15231 00 1/2-14 2.64 1.49 1.06
1/2 HA 15031 00 1/2-14 2.64 1.49 1.06
1/2 HA 15236 00* 1/2-14 2.64 1.49 1.06
1/2 HA 15036 00* 1/2-14 2.64 1.49 1.06
3/4 HA 15241 00 3/4-14 3.25 1.88 1.38
3/4 HA 15041 00 3/4-14 3.25 1.88 1.38
1 HA 15251 00 1-111/2 3.86 2.08 1.62
1 HA 15051 00 1-11 3.86 2.08 1.62
* Push-to-Connect Socket A = Overall Length B = Maximum Diameter
Push-to-Connect Socket - Part Nos. HA 15036 00 & HA 15236 00
This system allows automatic connection and disconnection simply by pushing the plug into or pulling it out of the socket body. Pulling on the hose moves the socket body forward rela-tive to the bulkhead mounted double-acting sleeve, and the plug is released without damage to the hose.
Sleeve dimensions for bulkhead mounting are shown at left.
PLUGS
Body Part Thread Size
Size Number (female) Dimensions (inches)
(inch) (Steel) NPTF BSPP C D E Hex
1/4 HA 15212 00 1/4-18 1.41 0.86 0.80 0.75
1/4 HA 15012 00 1/4-19 1.41 0.86 0.80 0.75
3/8 HA 15222 00 3/8-18 1.63 1.04 0.79 0.91
3/8 HA 15022 00 3/8-19 1.63 1.04 0.79 0.91
1/2 HA 15232 00 1/2-14 1.92 1.22 0.92 1.06
1/2 HA 15032 00 1/2-14 1.92 1.22 0.92 1.06
3/4 HA 15242 00 3/4-14 2.42 1.58 1.09 1.38
3/4 HA 15042 00 3/4-14 2.42 1.58 1.09 1.38
1 HA 15252 00 1-111/2 2.83 1.85 1.19 1.62
1 HA 15052 00 1-11 2.83 1.85 1.19 1.62
C = Overall Length D = Maximum Diameter E = Exposed Length when Connected
Series FF
ISO 16028 Flat Face Hydraulic
The Series FF is a .at face dry break or mini-mum spill hydraulic coupling that meets or exceeds the ISO 16028 standard.
Body sizes: 1/4, 3/8, 1/2, 5/8, 3/4, and 1.
The Series FF is a .at face dry break or minimum spill hydraulic coupling that meets or exceeds the ISO 16028 standard.
Body sizes: 1/4, 3/8, 1/2, 5/8, 3/4, and 1.
Features
. Meets or exceeds ISO 16028 standard
. 5075 psi maximum operating pressure for all sizes (connected and disconnected)
. Push-to-connect
. Sleeve-locking device to prevent accidental disconnection is standard
. Excellent mechanical performance (pressure/.ow)
Standard Materials
. Zinc plated steel with yellow chromate or QPQ .nish
. Stainless steel springs and locking balls
. Buna-N (Nitrile) seals
(-4 F to +212 F)
Accessories
. Dust caps and plugs
- PVC (red)
Applications
. FF series is ideal for applications where hydraulic spillage is a concern and interchangeability with other manufacturers is important.
- Public Utilities
- Construction Equipment
- Agricultural Equipment
- Mining Equipment
- Railway Maintenance
- Overhead bucket hoists
- Skid steer loaders
Series UP10 Ultra Pressure
10,000 psi
The Series UP10 is a high pressure hydraulic quick connect coupling designed to operate at pressures up to 10,000 psi. Its ball lock mecha-nism makes it a true quick connect coupling, as opposed to thread-to-connect couplings that are typically used in high pressure hydraulics. Body size is 1/4".
Features
. Ball lock
. Slim pro.le compared to threaded couplings
. High strength steel construction
. Poppet valves with metal-to-metal sealing
. 1/4" & 3/8" male & female NPTF end connections
. Standard sleeve lock
Standard Materials
. High strength steel bodies and valves
. Stainless steel springs & balls
. Buna-N (Nitrile) seals
. Te.on back-up ring (socket)
Accessories
. Dust caps and dust plugs
(See page 68)
Rated Pressure
Series PSI BAR
UP 10,000 700
Sockets Plugs
Male End Connections
Thread Dimensions
Part No. Size A B HEX
UP10S-25M 1/4-18 NPTF 2.69 1.18 0.88
UP10S-37M 3/8-18 NPTF 2.69 1.18 0.88
Thread Dimensions
Part No. Size C D HEX
UP10P-25M 1/4-18 NPTF 2.59 0.97 0.88
UP10P-37M 3/8-18 NPTF 2.59 0.97 0.88
Female End Connections
Thread Dimensions
Part No. Size C D HEX
UP10P-25F 1/4-18 NPTF 2.54 0.97 0.88
UP10P-37F 3/8-18 NPTF 2.59 0.97 0.88
Thread Dimensions
Part No. Size A B HEX
UP10S-25F 1/4-18 NPTF 2.64 1.18 0.88
UP10S-37F 3/8-18 NPTF 2.69 1.18 0.88
Series WA 56000 / HP3
Thread-to-Connect 10,000 psi
WA 56000
HP3
Series WA 56000 and HP3 are
high pressure hydraulic screw together couplings designed to operate at pressures up to 10,000 psi. Their rugged design make them suitable for use in hydraulic ram, pump and high impulse applications. Body sizes are 1/4" and 3/8".
Features
. Threaded latching
. Rugged steel construction
. Poppet valves with elastomer seal standard in 1/4" coupling
. Poppet valves and ball valves available in 3/8" coupling
. Body size matches thread size.
1/4" and 3/8" body sizes do not interchange.
Standard Materials
. Zinc plated steel construction
. High strength steel ball valves
. Stainless steel springs
. Buna-N (Nitrile) seals
. Te.on back-up ring (socket)
Accessories
. Dust caps and dust plugs
(See page 69)
Rated Pressure
Body Size PSI BAR
1/4" 10,000 700
3/8" 10,000 700
Sockets C Male End Connections Plugs C Female End Connections
Thread Dimensions
Valve Size Across
Part No. Type NPTF C D Flats
WA 56514 00 Poppet 1/4-18 1.26 1.10 0.75 WA 56524 00 Poppet 3/8-18 1.52 1.26 0.91
HP3PB37F Ball 3/8-18 1.52 1.26 0.91
Thread
Valve Size Dimensions
Part No. Type NPTF A B HEX
WA 56517 00 Poppet 1/4-18 2.36 1.12 0.88 WA 56527 00 Poppet 3/8-18 2.76 1.38 1.06
HP3SB37M Ball 3/8-18 2.76 1.38 1.06
Series 2-HKIG & 2-HKIL
1/4" Nominal
2-HKIG
2-HKIL
Series 2-HKIG and 2-HKIL Stainless Steel Couplings can be used with various liquids and gases. They are functionally identical, but do not in-terchange. They can be used where it is necessary to avoid crossing lines.
Features
. Ball lock
. Manual operation
. Noninterchangeable designs
. 1/4" body size
. All-stainless steel construction
. Sockets available with right-angle connection
Standard Materials
. Stainless steel bodies, valves and sleeves
. Stainless steel springs, balls and retaining rings
. Buna-N (Nitrile) seals
. Socket identi.cation ring
- 2-HKIG: White acetal
- 2-HKIL: Black acetal
Options
. Seals: Te.on, Viton, EPDM
Accessories
. Dust caps
(See page 68)
Rated Pressure
Series PSI BAR
2-HKIG & 2-HKIL 1500 103
Series 2-HKIG & 2-HKIL
1/4" Nominal
SOCKETS 2-HKIG PLUGS
Male End Connections
Female End Connections
Male End Connections
Female End Connections
Thread Dimensions
Part No. Size C D HEX
2-KIG-F15 1/4-18 NPTF 1.98 1.01 0.69 2-KIG-F20 3/8-18 NPTF 1.98 1.01 0.69
Thread Dimensions
Part No. Size A B HEX
2-HIG10 1/8-27 NPTF 2.18 1.06 0.81
2-HIG15 1/4-18 NPTF 2.31 1.06 0.81
2-HIG20 3/8-18 NPTF 2.31 1.06 0.81
2-HIG720 7/16-20* 2.27 1.06 0.81 2-HIG-LLRA720. 7/16-20* 2.09 1.06
Thread Dimensions
Part No. Size A B HEX
2-HIG11 1/8-27 NPTF 2.18 1.06 0.81 2-HIG16 1/4-18 NPTF 2.26 1.06 0.81
Thread Dimensions
Part No. Size C D HEX
2-KIG-F16 1/4-18 NPTF 1.84 1.01 0.69 2-KIG-F720 7/16-20* 1.61 1.01 0.69 2-KIG-F 9/16-18 1.17 1.01 0.88
SOCKETS 2-HKIL PLUGS
Thread Dimensions
Part No. Size A B HEX
2-HIL10 1/8-27 NPTF 2.18 1.06 0.81 2-HIL15 1/4-18 NPTF 2.31 1.06 0.81 2-HIL20 3/8-18 NPTF 2.31 1.06 0.81 2-HIL720 7/16-20* 2.27 1.06 0.81 2-HIL-LLRA720. 7/16-20* 2.09 1.06
Thread Dimensions
Part No. Size C D HEX
2-KIL-F15 1/4-18 NPTF 1.98 1.01 0.69 2-KIL-F20 3/8-18 NPTF 1.98 1.01 0.69
Thread Dimensions
Part No. Size A B HEX
2-HIL11 1/8-27 NPTF 2.18 1.06 0.81 2-HIL16 1/4-18 NPTF 2.26 1.06 0.81
Hose Dimensions
Part No. Size C D HEX
2-KIL-F16 1/4-18 NPTF 1.84 1.01 0.69 2-KIL-F720 7/16-20* 1.61 1.01 0.69 2-KIL-F 5/8-18 1.17 1.01 0.88
* 1/4" SAE Flare . Right-Angle End Connection
How to build a socket or plug part number with options:
Example: 2-HIG15 - 143
Notes: 1) Some part numbers may be subject to minimum order quantities.
2) Options not shown may be available by special quotation.
Consult your Hansen distributor.
Seal Material:
115 = Te.on
143 = Viton
192 = EPDM
Standard Part Number
from Tables Above
Series DB
316 Stainless Steel Flat Face
The Series DB is designed for .uid handling where minimum spillage and minimum air inclusion are required. Couplings in this series are constructed of 316L stainless steel, which makes them suitable for use in chemical, pharmaceutical and food processing industries.
Body sizes are 1/4, 3/8, 1/2", 3/4 and 1".
Features
. Ball lock
. Push-to-connect
. Minimal .uid loss when disconnecting
. Minimal air inclusion when connecting
. High .ow capacity
. NPTF and BSPP threads available.
Standard Materials
. 316L stainless steel construction
. Viton seals
Options
. Various seal materials available.
Rated Pressure
Body Socket Plug Connected
Size PSI BAR PSI BAR PSI BAR
1/4-1 1,450 100 2,030 140 2,030 140
Spillage & Air Inclusion
Spillage Air Inclusion
Body Max. per Max. per
Size Disconnect Connect
1/4" .01 ml .01 ml
3/8" .02 ml .02 ml
1/2" .02 ml .02 ml
3/4" .02 ml .03 ml
1" .04 ml .13 ml
Sockets Plugs
Body Thread
Size Size Dimensions
(inch) Part No. (Female) A B HEX
1/4 2DBS-25F 1/4-18 NPTF 1.98 1.02 0.88 1/4 2DBS-25FBS 1/4-19 BSPP 1.98 1.02 0.88
3/8 3DBS-37F 3/8-18 NPTF 2.36 1.27 1.00
3/8 3DBS-37FBS 3/8-19 BSPP 2.36 1.27 1.00
1/2 4DBS-50F 1/2-14 NPTF 2.52 1.59 1.38
1/2 4DBS-50FBS 1/2-14 BSPP 2.52 1.59 1.38 3/4 6DBS-75F 3/4-14 NPTF 3.71 2.00 1.50
3/4 6DBS-75FBS 3/4-14 BSPP 3.71 2.00 1.50
1 8DBS-100F 1-111/2 NPTF 3.52 2.25 1.81
1 8DBS-100FBS 1-11 BSPP 3.52 2.25 1.81
Body Thread
Size Size Dimensions
(inch) Part No. (Female) C D HEX
1/4 2DBP-25F 1/4-18 NPTF 1.65 0.94 0.81 1/4 2DBP-25FBS 1/4-19 BSPP 1.65 0.94 0.81
3/8 3DBP-37F 3/8-18 NPTF 2.34 1.08 0.94
3/8 3DBP-37FBS 3/8-19 BSPP 2.34 1.08 0.94 1/2 4DBP-50F 1/2-14 NPTF 2.63 1.37 1.18
1/2 4DBP-50FBS 1/2-14 BSPP 2.63 1.37 1.18 3/4 6DBP-75F 3/4-14 NPTF 3.68 1.88 1.63
3/4 6DBP-75FBS 3/4-14 BSPP 3.68 1.88 1.63
1 8DBP-100F 1-111/2 NPTF 3.52 2.08 1.81
1 8DBP-100FBS 1-11 BSPP 3.52 2.08 1.81
All dimensions in inches.
Series WA 10000
Refrigerant and Fluid Transfer
The Series WA 10000 is a thread together, minimum spill/inclusion coupling designed for refrigeration, air conditioning, gas and liquid trans-fer applications.
Features
. Dry break design minimizes .uid loss and air inclusion
. Threaded connection permits connecting and disconnecting under pressure
. Brazed or threaded end connections available
. Male half can be bulkhead mounted
. Interchanges with refrigerant couplings existing on the market
Standard Materials
. Zinc plated steel construction
. HNBR and Neoprene seals
Accessories
. SAE 37 (JIC) adapters (steel)
. Braze adapters (brass)
. O-rings for adapters
. Dust caps and dust plugs
Rated Pressure
Dash Female Half Male Half Connected
Size PSI BAR PSI BAR PSI BAR
-8 435 30 1,160 80 1,810 125
-12 435 30 1,015 70 1,015 70
-16 360 25 725 50 725 50
Series WA 10000
Refrigerant and Fluid Transfer
Dimensions (inches)
Female Half
Male Half
* Connected
Length
(no adapter)
H
Overall
Length
A
Max.
Dia.
B
Hex
Size
C
Overall
Length
E
Max.
Dia.
F
Hex
Size
G
Hex
Size
D
Coupling
Dash
Size
Seal
Material
Part No.
Part No.
-8 HNBR WA 10037 I0 1.66 1.30 1.18 1.02 WA 10034 I0 1.38 1.26 1.15 2.67
-8 Neoprene WA 10037 M0 1.66 1.30 1.18 1.02 WA 10034 M0 1.38 1.26 1.15 2.67
-12 HNBR WA 10057 I0 2.17 1.77 1.62 1.38 WA 10054 I0 1.73 1.77 1.62 3.33
-12 Neoprene WA 10057 M0 2.17 1.77 1.62 1.38 WA 10054 M0 1.73 1.77 1.62 3.33
-16 HNBR WA 10067 I0 2.40 2.21 1.97 1.77 WA 10064 I0 1.98 2.09 1.89 3.75
-16 Neoprene WA 10067 M0 2.40 2.21 1.97 1.77 WA 10064 M0 1.98 2.09 1.89 3.75
* To calculate the overall length of a connected coupling with adapters installed, add the exposed lengths of two adapters to the connected length with no adapter (Connected Length with Adapters = H + 2 x K).
Maximum Bulkhead Thickness (inches)
Coupling
Dash
Size
Assembly Torque, lb-ft
With Lock
Washer
Without Lock
Washer
Male/Female
Adapter/Body
-8 0.16 0.28 25-30 15-20
-12 0.23 0.34 40-45 20-25
-16 0.22 0.28 50-55 25-30
All dimensions in inches.
STRAIGHT-
THROUGH
STRAIGHT-
THROUGH
53
54
HANSEN COUPLINGS
HANSEN COUPLINGS
STRAIGHT-THROUGH
COUPLINGS
53
Contents and Selector Chart
Body
Material
Locking Mecha-nism
Body Size
Options
1/8 INCH
1/4 INCH
3/8 INCH
1/2 INCH
3/4 INCH
1 INCH
1. INCH
1. INCH
2 INCH
2. INCH
BRASS
STEEL (Plugs Only)
STAINLESS STEEL (303)
PLASTIC (Polypropylene)
BALL LOCK
PLASTIC FINGERS
SLEEVE LOCK
SEAL MATERIALS (Various)
DUST CAP/PLUG (Vinyl)
Coupling
Series Page
1-ST 54 . . . . . . .
2-ST 54 . . . . . . .
3-ST 54 . . . . . . .
4-ST 54 . . . . . . .
6-ST 54 . . . . . . .
8-ST 54 . . . . . . . .
10-ST 54 . . . . . . . .
12-ST 54 . . . . . . .
16-ST 54 . . . . . . .
20-ST 54 . . . . . .
P2-ST 56 . . .
P3-ST 56 . . .
GH 56 . . .
Flo-Temp 57 . . . . . .
Socket dust plug only
Socket dust plug and plug dust cap
. Plug dust cap only
Series ST Straight-Through
Series ST straight-through couplings are designed for use where minimum pressure drop is required and valving is not needed. They are well suited for use on pressure wash, steam cleaning and carpet cleaning equipment, and many .uid transfer systems. Body sizes range from 1/8"
to 2-1/2".
Features
. Ball lock
. Manual operation
. Smooth bore permits free .ow of liquid or gas.
. Male and female NPTF, BSPP and hose stem connections
Standard Materials
. Brass or 303 stainless steel socket construction
. Stainless steel springs, balls and retaining rings
. Brass, zinc plated steel and 303 stainless steel plugs
. High impulse heat treated 416 stainless steel plugs available in 1/4" and 3/8" body sizes
. Buna-N (Nitrile) seals
Options
. Sleeve lock
. Seals: Te.on (1-ST through 8-ST), Neoprene, Viton, Buna-N and EPDM (See Elastomer Selection Guide, page 71)
Accessories
. Dust caps and dust plugs for a limited number of sizes
(See page 68)
*Rated Pressure
Brass Socket Brass Socket Stainless Steel
Body Brass Plug Steel Plug Socket & Plug
Series Size PSI BAR PSI BAR PSI BAR
1-ST 1/8" 2,800 193 3,400 234 4,200 290
2-ST 1/4" 5,200 359 5,500 379 7,500 517
3-ST 3/8" 2,800 193 4,200 290 6,300 434
4-ST 1/2" 2,200 152 3,500 241 3,600 248
6-ST 3/4" 1,700 117 2,100 145 3,000 207
8-ST 1" 1,300 90 2,000 138 2,000 138
10-ST 11/4" 1,700 117 2,700 186 2,200 152
12-ST 11/2" 1,400 97 2,200 152 2,500 172
16-ST 2" 1,400 97 2,200 152 1,500 103
20-ST 21/2" 900 62 1,500 103 C C
* Pressure ratings are for sockets and plugs with threaded end connections. Pressure ratings of couplings with hose stems may be signi.cantly lower, and will depend on the type of hose and the method of clamping. Refer to hose manufacturers end connection pressure ratings. The best way to determine suitability for an application is to run pressure testing under controlled conditions.
Series ST Straight-Through
Sockets
Male End Connections
Body Part Number Thread Size Dimensions
Size Brass Stainless NPTF BSPP A B Hex
1/8 1-S10 LL1-S10 1/8-27 1.06 0.69 0.50
1/8 1-S10BS LL1-S10BS 1/8-28 1.00 0.69 0.56
1/4 2-S15 LL2-S15 1/4-18 1.72 0.94 0.81
1/4 2-S15BS LL2-S15BS 1/4-19 1.56 0.94 0.81
3/8 3-S20 LL3-S20 3/8-18 1.75 1.13 1.00
3/8 3-S20BS LL3-S20BS 3/8-19 1.62 1.13 1.00
1/2 4-S25 LL4-S25 1/2-14 2.03 1.31 1.13
1/2 4-S25BS LL4-S25BS 1/2-14 1.80 1.31 1.13
3/4 6-S30 LL6-S30 3/4-14 2.22 1.69 1.44
3/4 6-S30BS 3/4-14 2.03 1.69 1.44
1 8-S35 1-111/2 2.53 2.00 1.75
1 8-S35BS 1-11 2.37 2.00 1.75
Female End Connections
Body Part Number Thread Size Dimensions
Size Brass Stainless NPTF BSPP A B Hex
1/8 1-S11 LL1-S11 1/8-27 1.06 0.69 0.50
1/8 1-S11BS LL1-S11BS 1/8-28 1.03 0.69 0.56
1/4 2-S16 LL2-S16 1/4-18 1.50 0.94 0.81
1/4 2-S16BS LL2-S16BS 1/4-19 1.50 0.94 0.81
3/8 3-S21 LL3-S21 3/8-18 1.59 1.13 1.00
3/8 3-S21BS LL3-S21BS 3/8-19 1.59 1.13 1.00
1/2 4-S26 LL4-S26 1/2-14 1.91 1.31 1.13
1/2 4-S26BS LL4-S26BS 1/2-14 1.91 1.31 1.13
3/4 6-S31 LL6-S31 3/4-14 2.06 1.69 1.44
3/4 6-S31BS LL6-S31BS 3/4-14 2.06 1.69 1.44
1 8-S36 LL8-S36 1-111/2 2.31 2.00 1.75
1 8-S36BS LL8-S36BS 1-11 2.33 2.00 1.75
11/4 10-S41* LL10-S41 11/4-111/2 2.44 2.50 2.00
11/4 10-S41BS* 11/4-11 2.51 2.50 2.00
11/2 12-S46* LL12-S46 11/2-111/2 2.88 3.13 2.63
11/2 12-S46BS* LL12-S46BS 11/2-11 2.88 3.13 2.63
2 16-S51* LL16-S51 2-111/2 3.09 3.75 3.00
2 16-S51BS* LL16-S51BS 2-11 3.30 3.75 3.00
21/2 20-S56* 21/2-8 3.44 4.50 3.50
* With Steel Sleeve
Hose Stem Connections
Body Part Number Dimensions
Size Brass Stainless Hose I.D. A B
1/8 1-S12 LL1-S12 3/16" 1.41 0.69 1/8 1-S17 LL1-S17 1/4" 1.41 0.69 1/4 2-S17 LL2-S17 1/4" 2.10 0.94 3/8 3-S22 LL3-S22 3/8" 2.09 1.13 1/2 4-S27 LL4-S27 1/2" 2.19 1.31 3/4 6-S32 LL6-S32 3/4" 3.19 1.69 1 8-S37 LL8-S37 1" 3.32 2.00
How to build a socket part number with options:
Notes: 1) The Sleeve Lock device prevents accidental disconnection.
2) Series ST couplings are designed for use with elastomer seals. Te.on is not an elastomer. It is rigid and not resilient. Couplings with Te.on seals may leak and/or be dif.cult to connect. Force to connect may be reduced by heating connected couplings in hot water; then, cooling before disconnecting. Te.on seals are available for Series 1-ST through 8-ST.
3) The 146 seal option may be speci.ed for fuels and hydraulic .uids that cause standard Buna-N seals to swell escessively.
4) Some part numbers may be subject to minimum order quantities.
5) Some options may be available only by special quotation. Consult your Hansen distributor.
Example: 3-S21 - SL - 143
Seal Material:
115 = Te.on2
118 = Neoprene
143 = Viton
146 = Buna-N3
192 = EPDM
Standard Part Number
from Part Number Tables
SL = Sleeve Lock1
All dimensions in inches.
Series ST Straight-Through
Plugs
Male End Connections
Body Part Number Thread Size Dimensions
Size Brass Steel Stainless NPTF BSPP C D Hex
1/8 B1-T10 1-T10 LL1-T10 1/8-27 1.09 0.51 0.44
1/8 B1-T10BS 1/8-28 0.89 0.65 0.56
1/8 B1-T15 1-T15 1/4-18 1.25 0.65 0.56
1/4 B2-T15 2-T15 LL2-T15 1/4-18 1.61 0.65 0.56
1/4 HL2-T15* 1/4-18 1.61 0.65 0.56
1/4 B2-T15BS 2-T15BS LL2-T15BS 1/4-19 1.35 0.87 0.75
3/8 B3-T20 3-T20 LL3-T20 3/8-18 1.69 0.79 0.69
3/8 HL3-T20* 3/8-18 1.69 0.79 0.69
3/8 B3-T20BS 3-T20BS LL3-T20BS 3/8-19 1.50 1.01 0.88
1/2 B4-T25 4-T25 LL4-T25 1/2-14 2.03 1.01 0.88
1/2 B4-T25BS 4-T25BS LL4-T25BS 1/2-14 1.77 1.15 1.00
3/4 B6-T30 6-T30 LL6-T30 3/4-14 2.25 1.23 1.06
3/4 B6-T30BS LL6-T30BS 3/4-14 2.00 1.44 1.25
1 B8-T35 8-T35 LL8-T35 1-111/2 2.53 1.59 1.38
1 B8-T35BS 1-11 2.30 2.02 1.75
11/4 B10-T40 10-T40 LL10-T40 11/4-111/2 2.72 2.02 1.75
11/4 B10-T40BS 11/4-11 2.50 2.31 2.00
11/2 B12-T45 12-T45 11/2-111/2 3.31 2.60 2.25
11/2 B12-T45BS 11/2-11 3.06 2.60 2.25
2 B16-T50 16-T50 LL16-T50 2-111/2 3.50 3.18 2.75
2 LL16-T50BS 2-11 3.50 3.18 2.75
21/2 B20-T55 21/2-8 3.97 3.75 3.25
*High impulse heat treated 416 stainless steel
Female End Connections
Body Part Number Thread Size Dimensions
Size Brass Steel Stainless NPTF BSPP C D Hex
1/8 B1-T11 1-T11 LL1-T11 1/8-27 1.00 0.58 0.50
1/8 B1-T11BS LL1-T11BS 1/8-28 0.97 0.65 0.56
1/4 B2-T16 2-T16 LL2-T16 1/4-18 1.50 0.79 0.69
1/4 HL2-T16* 1/4-18 1.50 0.79 0.69
1/4 B2-T16BS 2-T16BS LL2-T16BS 1/4-19 1.45 0.87 0.75
3/8 B3-T21 3-T21 LL3-T21 3/8-18 1.63 0.94 0.81
3/8 HL3-T21* 3/8-18 1.63 0.94 0.81
3/8 B3-T21BS 3-T21BS LL3-T21BS 3/8-19 1.63 1.01 0.88
1/2 B4-T26 4-T26 LL4-T26 1/2-14 1.94 1.15 1.00
1/2 B4-T26BS 4-T26BS LL4-T26BS 1/2-14 1.92 1.23 1.06
3/4 B6-T31 6-T31 LL6-T31 3/4-14 2.06 1.37 1.19
3/4 B6-T31BS LL6-T31BS 3/4-14 2.01 1.52 1.31
1 B8-T36 8-T36 LL8-T36 1-111/2 2.21 1.80 1.56
1 B8-T36BS 8-T36BS LL8-T36BS 1-11 2.23 1.80 1.56
11/4 B10-T41 10-T41 LL10-T41 11/4-111/2 2.34 2.31 2.00
11/4 B10-T41BS 11/4-11 2.44 2.31 2.00
11/2 B12-T46 12-T46 LL12-T46 11/2-111/2 2.88 2.60 2.25
11/2 B12-T46BS 11/2-11 2.88 2.60 2.25
2 B16-T51 16-T51 2-111/2 3.03 3.18 2.75
2 B16-T51BS 2-11 3.25 3.18 2.75
21/2 B20-T56 20-T56 21/2-8 3.37 3.75 3.25
*High impulse heat treated 416 stainless steel
Hose Stem Connections
Body Part Number Dimensions
Size Brass Steel Stainless Hose I.D. C D
1/8 B1-T12 LL1-T12 3/16" 1.28 0.44
1/8 B1-T17 LL1-T17 1/4" 1.28 0.44
1/4 B2-T17 2-T17 LL2-T17 1/4" 1.93 0.56
3/8 B3-T22 3-T22 LL3-T22 3/8" 2.09 0.69
1/2 B4-T27 4-T27 LL4-T27 1/2" 2.17 0.88
3/4 B6-T32 6-T32 LL6-T32 3/4" 3.17 1.19
1 B8-T37 8-T37 1" 3.28 1.50
Any plug will connect with any socket in the same series (same body size)
All dimensions in inches.
Series P2-ST & P3-ST
Series P-2ST and P3-ST cou-plings are designed for use with medical equipment. They can also be used in a variety of low pressure .uid transfer applica-tions.
Features
. Interchange with 2-ST and 3-ST
. Excellent chemical resistance
. Light weight
. Low cost
Standard Materials
. Polypropylene construction
. Buna-N (Nitrile) seals
SOCKETS
Hose Dimensions
Series Part Number I.D. A B
P2-ST P2-STS-25H 1/4" 2.07 1.12
Each P2-ST socket uses one Part No. 902-7 o-ring.
P3-ST P3-STS-37H 3/8" 2.61 1.37
Each P3-ST socket uses one Part No. 902-10-199 o-ring.
PLUGS
Dimensions
Series Part Number Thread Size C D HEX
P2-ST P2-STP-25M 1/4-18 NPTF 1.56 0.65 0.56
P3-ST P3-STP-25M 1/4-18 NPTF 1.69 0.79 0.69
P3-ST P3-STP-37M 3/8-18 NPTF 1.69 0.79 0.69
Rated Pressure
Temperature* PSI BAR
75 110 8
200 30 2
Hose Dimensions
Series Part Number I.D. C D
P3-ST P3-STP-37H 3/8" 2.16 0.79
*235F maximum sterilization temperature
Series GH Garden Hose
Series GH couplings are designed for water service where hoses are connected and disconnected frequently. They are available with garden hose threads and 3/4" pipe threads. Sockets are available without valves for maximum .ow and with valves for convenience of operation.
Features
. Durable brass construction
. Ball lock
. High quality Buna-N seals
. Straight-through or one-way shut-off
Standard Materials
. Brass plug and socket bodies
. Nickel plated brass sleeve
. Stainless steel balls and
springs
. Buna-N o-ring and washer
. Plastic (acetal) valve
SOCKETS
Female Dimensions
Part No. Hose Thread A B
GHS-12 Non-valved 3/4-111/2 1.19 1.19
GHS-12-V Valved 3/4-111/2 1.19 1.19
Female Dimensions
Part No. Pipe Thread A B HEX
8-GHS-75FS Non-valved 3/4-14 NPTF 1.18 1.25 1.13
8-GHS-75FS-V Valved 3/4-14 NPTF 1.18 1.25 1.13
PLUGS
Male Dimensions
Part No. Hose Thread C D
GHP-11 3/4-111/2 1.30 1.06
Rated Pressure
PSI BAR
200 14
Male Dimensions
Part No. Pipe Thread C D HEX
8-GHP-75M 3/4-14 NPTF 1.66 1.18 1.06
Series FLO-TEMP 200/300/500
Flo-Temp couplings provide the .ow needed to cool or heat injec-tion molds and die casting dies. Sockets are available non-valved for maximum .ow, and valved to prevent .uid loss when discon-nected. Flo-Temp couplings can be used with water-glycol, hot water and hot oil. Body sizes are
1/4", 3/8" and 1/2".
Features
. Non-valved straight-through models for maximum .ow
. Valved sockets for automatic shut-off when line is disconnected
. Sockets with straight, 90 and 45 hose stems and without hose stem
. Brass plugs with male pipe thread for recessed mounting to avoid damage to plugs when molds are being changed or stored
Standard Materials
. Brass socket construction
. Stainless steel springs and locking balls
. Viton seals (-30F to +450F)
. Brass plugs
Rated Pressure
Series PSI BAR
200/300/500 200 14
FLOW RATE, gpm
(Water)
Replacement Parts
Part Number
Description Series 200 Series 300 Series 500
Seal WFT-200-228 WFT-300-228 WFT-500-228
Valve VFT-200 VFT-300 VFT-500
Valve O-Ring 902-3-143 903-8-143 914-3-143
Valve Spring VSFT-200 VS-3000 VSFT-500
Series FLO-TEMP 200/300/500
SOCKETS
Without Hose Stem
90 Hose Stem
Straight Hose Stem
45 Hose Stem
*Part numbers with HP suf.x have push-on hose barb. All other FTS part numbers have standard hose barb.
PLUGS
Female Pipe Thread
Male Pipe Thread
ACCESSORIES
ACCESSORIES
61
64
71
72
HANSEN COUPLINGS
HANSEN COUPLINGS
HANSEN COUPLINGS
HANSEN COUPLINGS
GAS COUPLINGS
61
Series Gas-Mate
3/8" to 1" Gas-Mate 11/4" Gas-Mate
Gas-Mate couplings are one-way shut-off safety couplings designed for use with various fuel gases. Body sizes are 3/8", 1/2", 3/4", 1" and 1.".
Features
. Connect and disconnect without using wrenches
. Automatic shut-off when plug is removed from socket
. In case of .re, heat-sensitive plug allows socket valve to
close, stopping gas .ow
. Push-to-connect (1." only)
For connection of gas cooking
appliances and other gas-.red
devices.
CSA* design certi.ed, in both the
United States and Canada, for
natural gas, manufactured gas,
liqui.ed petroleum and LP gas-air
mixtures at pressures not in excess
of 1/2 psig (3.5 kPa)
*CANADIAN STANDARDS ASSOCIATION
Complies with the requirements of
ANSI Z21.41 & CSA 6.9.
Standard Materials
. Brass construction
. Stainless steel locking balls
. Viton socket o-ring
. Valve actuator soldered to plug with low melting temperature alloy.
Accessories
. Dust caps and dust plugs
(See page 68.)
GAS
COUPLINGS
Capacities
Body Socket Plug Capacity* Socket O-Ring
Size Part No. Part No. BTU/hr Part No.
3/8" 100-006 100-506 60,000 914-3-143M
1/2" 100-008 100-508 90,000 902-14-143M
3/4" 100-010 100-510 245,000 902-18-143M
1" 100-012 100-512 310,000 902-23-143M
1." GMS1250FH GMP1250F 500,000 914-26-143M
* Capacity is based on natural gas having a speci.c gravity of 0.64 and a heat capacity of 1,000 BTU per cubic foot. Inlet pressure is 12 inches water column and the pressure drop is 0.3 inch water column.
Sockets Plugs
Thread Dimensions
Body Size Across
Size Part No. NPTF A B Flats
3/8" 100-006 3/8-18 2.44 1.13 1.00
1/2" 100-008 1/2-14 2.84 1.38 1.13
3/4" 100-010 3/4-14 3.17 1.75 1.50
1" 100-012 1-11. 3.94 2.13 1.75
Thread
Body Size Dimensions
Size Part No. NPTF C D HEX
3/8" 100-506 3/8-18 1.59 0.94 0.81
1/2" 100-508 1/2-14 1.94 1.16 1.00
3/4" 100-510 3/4-14 2.06 1.52 1.31
1" 100-512 1-11. 2.47 1.73 1.50
Thread
Body Size Dimensions
Size Part No. NPTF C D HEX
1." GMP1250F 1.-11. 2.44 2.16 1.88
Thread Dimensions
Body Size
Size Part No. NPTF A B Hex
1." GMS1250FH 1.-11. 4.15 2.28 2.00
62
HANSEN COUPLINGS
63
HANSEN COUPLINGS
Series FS Flow Sensor
Series FS Flow Sensors are designed to protect personnel and property in case of hose failure in compliance with Federal Safety Regulations. Flow Sensors are intended for use with compressed air.
Features
. Automatically shuts off air .ow to ruptured hose
. Reduces risk of injury or damage from hose whip
. Automatically resets after failure correction
. 250 psig pressure rating (all sizes)
. Low pressure drop
. Operates in any orientation
. Compact design, economical, tamper-resistant
Standard Materials
. Brass body
. Acetal valve (1/4" - 1")
. Brass valve (1.")
. Stainless steel valve spring
All Flow Sensors have a pressure drop of approximately 2 psid at 80% of shut-off .ow.
Flow Data - The graph below left indicates the minimum inlet pressure for various hose lengths. Each Flow Sensor has a shut-off .ow rating dependent upon inlet pressure. The length of hose and .tting size are critical in the proper operation of the valve. For example, with the B8-FS-50F-8 Flow Sensor, the hose I.D. must be 1/2" using only 1/2" pipe thread end .ttings. Thirty feet of hose requires at least 20 psig inlet pressure; .fty feet of hose requires at least 28 psig inlet pressure; and seventy-.ve feet of hose requires at least 36 psig inlet pressure. Inlet pressures lower than those indicated on the curves below will not guarantee protection in case of hose failure. Valve shut-off occurs only when .ow exceeds the .ow rating for the inlet pressure.
If hose lengths greater than 75 feet are required, a 1/2" size or larger Flow Sensor must be installed on the inlet end of each 75-foot section, and a correspondingly higher inlet pressure must be supplied for proper operation of the Flow Sensor to assure safety.
All dimensions in inches.
In-Line Check Valves
Series RA 4000 in-line check valves are designed for use in hydraulic circuits. They are rugged and reliable, offer low pressure drop and have elastomer valve seals for leak-free operation. Available sizes are 1/4" to 1".
Features
. One-piece zinc plated steel body
. One-piece high strength steel valve provides excellent reliability under severe operating conditions
. The valve has a captive nitrile (Buna-N) seal, assuring no leakage at low and high pressures
. Low pressure drop versus .ow
. Female NPTF end connections
. Cracking pressure: 7 psi (0.5 bar)
Size Thread Dimensions *Rated Pressure
(inch) Part No. NPTF A Hex PSI BAR
1/4 RA 04210 00 1/4-18 1.97 0.75 10,150 700
3/8 RA 04220 00 3/8-18 2.36 0.91 10,150 700
1/2 RA 04230 00 1/2-14 2.76 1.06 7,250 500
3/4 RA 04240 00 3/4-14 3.39 1.38 7,250 500
1 RA 04250 00 1-11. 3.94 1.62 7,250 500
*Pressure ratings are given for valves in an open position with a constant .ow.
Fittings
Hose Clamps (Brass) . Compression Type, Reusable
Female Pipe Thread (FPT)
Male Pipe Thread (MPT)
1/8-27 NPTF
Hose Part No.
I.D. O.D. MPT FPT
Series A 3/16" 7/16" 1A0
3/16" 1/2" 1A3
Series B 1/4" 15/32" 1B1
1/4" 1/2" 1B3
1/4" 9/16" 1B5
1/4" 5/8" 1B7
1/4" 3/4" 1B11
3/4-14 NPTF
Hose Part No.
I.D. O.D. MPT FPT
Series P 1/2" 13/16" 8P13 1/2" 7/8" 8P15 1/2" 15/16" 8P17 1/2" 1" 8P19
Series R 3/4" 11/8" 8R23 3/4" 13/16" 8R25 3/4" 1." 8R27
3/8-18 NPTF
Hose Part No.
I.D. O.D. MPT FPT
Series B 1/4" 15/32" 4B1
1/4" 1/2" 4B3
1/4" 9/16" 4B5
1/4" 5/8" 4B7
Series C 5/16" 5/8" 4C7 5/16" 11/16" 4C9
Series D 3/8" 9/16" 4D5 5D5 3/8" 5/8" 4D7 5D7 3/8" 11/16" 4D9 5D9 3/8" 3/4" 4D11 5D11 3/8" 13/16" 4D13 5D13 3/8" 7/8" 4D15 5D15
Series P 1/2" 13/16" 4P13 1/2" 7/8" 4P15 1/2" 15/16" 4P17 1/2" 1" 4P19
1-11. NPTF
Hose Part No.
I.D. O.D. MPT FPT
Series R 3/4" 11/8" 10R23 3/4" 13/16" 10R25 3/4" 1." 10R27
1/4-18 NPTF
Hose Part No.
I.D. O.D. MPT FPT
Series A 3/16" 7/16" 2A0
3/16" 1/2" 2A3
Series B 1/4" 15/32" 2B1 3B1
1/4" 1/2" 2B3 3B3
1/4" 9/16" 2B5 3B5
1/4" 5/8" 2B7 3B7
1/4" 11/16" 2B9 3B9
Series C 5/16" 9/16" 2C5 C
5/16" 5/8" 2C7 3C7
5/16" 11/16" 2C9 C
Series D 3/8" 9/16" 2D5 3D5
3/8" 5/8" 2D7 3D7
3/8" 11/16" 2D9 3D9
3/8" 3/4" 2D11 3D11
3/8" 13/16" 2D13 3D13
3/8" 7/8" 2D15 3D15
Series P 1/2" 13/16" 2P13
1/2" 7/8" 2P15
1/2" 15/16" 2P17
1/2" 1" 2P19
1/2-14 NPTF
Hose Part No.
I.D. O.D. MPT FPT
Series P 1/2" 13/16" 6P13 7P13 1/2" 7/8" 6P15 7P15 1/2" 15/16" 6P17 7P17 1/2" 1" 6P19 7P19
Series R 3/4" 11/8" 6R23 3/4" 13/16" 6R25 3/4" 1." 6R27
Swivel Nut Hose Clamps (Brass) . Compression Type, Reusable
With Brass Male Swivel Insert C External Seat (inverted .are) for use with paint spray and oxygen .ttings, etc. (Will accept 37 or 45 .are.). The Swivel Nut Hose Clamp is similar to the standard hose clamp, but includes a swivel nut.
With Steel Female Swivel Insert, 37 Female Flare, for use with .ared tube .ttings.
9/16-18 Straight Thread
Hose Part
I.D. O.D. No.
Series A 3/16" 7/16" 4LA0* 3/16" 7/16" 4RA0 3/16" 1/2" 4LA3* 3/16" 1/2" 4RA3 Series B 1/4" 15/32" 4RB1 1/4" 1/2" 4LB3* 1/4" 1/2" 4RB3 1/4" 9/16" 4LB5* 1/4" 9/16" 4RB5 1/4" 5/8" 4RB7 Series D 3/8" 5/8" 4RD7 3/8" 11/16" 4RD9 3/8" 3/4" 4RD11
* Left-hand thread for acetylene service
7/16-20 Straight Thread
Hose Part
I.D. O.D. No.
Series B 1/4" 15/32" 720B1
1/4" 1/2" 720B3
1/4" 9/16" 720B5
1/4" 5/8" 720B7
5/8-18 Straight Thread
Hose Part
I.D. O.D. No.
Series D 3/8" 5/8" 2FD7
3/8" 11/16" 2FD9
3/8" 3/4" 2FD11
1/4-18 NPSM Straight Thread
Hose Part
I.D. O.D. No.
Series B 1/4" 15/32" 5RB1 1/4" 1/2" 5RB3 1/4" 9/16" 5RB5
1/4" 5/8" 5RB7 Series C 5/16" 5/8" 5RC7 Series D 3/8" 5/8" 5RD7 3/8" 11/16" 5RD9 3/8" 3/4" 5RD11
3/4-16 Straight Thread
Hose Part
I.D. O.D. No.
Series P 1/2" 13/16" 1216P13
1/2" 7/8" 1216P15
9/16-18 Straight Thread
Hose Part
I.D. O.D. No.
Series D 3/8" 5/8" 4FD7
3/8" 11/16" 4FD9
3/8" 3/4" 4FD11
3/8" 7/8" 4FD15
Fittings
Unions (Brass)
Adapters
Hose Stems
Part No. H25MHU Part No. HHU25M
1/4" Male Pipe Thread 1/4" Male Pipe Thread Union Half consists of Union Half H25HMU01 body and 902-8 o-ring.
Oxygen Adapter (Brass)
Part No. Thread Size
9-MBR 1/4-18 NPTF x 9/16-18 Right Hand
Hose Stem-to-Male Pipe Thread
Hose Thread Part No.
I.D. NPTF Brass Stainless
3/16" 1/8-27 SN16 LLS16
1/4" 1/8-27 SN17
3/8" 1/8-27 SN18
3/16" 1/4-18 S19
1/4" 1/4-18 S20 LLS20
5/16" 1/4-18 S205
3/8" 1/4-18 S21
1/2" 1/4-18 S22
1/4" 3/8-18 S23
3/8" 3/8-18 S24 LLS24
1/2" 3/8-18 S25
1/2" 1/2-14 S26 LLS26
3/4" 3/4-14 LLS30
1" 1-111/2 LLS35
Part No. H25HHU Part No. HHU25F
1/4" Hose Stem 1/4" Female Pipe
Union Half consists Thread Union Half
of H25HHU01 stem,
902-8 o-ring and HUSN1 sleeve
Pipe-to-Pipe Adapter (Brass)
Part No. Thread Size
18-MAM 1/8-27 NPTF x 1/4-18 NPTF 19-MBM 1/4-18 NPTF x 1/4-18 NPTF
20-MBM 1/4-18 NPTF x 3/8-18 NPTF
Splicers (Brass)
Part No. H37HHU Part No. HHU37H
3/8" Hose Stem 3/8" Hose Stem
Union Half consists Union Half
of H37HHU01 stem,
902-8 o-ring and
HUSN1 sleeve
Any union half shown on the left can be used with any union half shown on the right.
Flare-to-Pipe Adapter (Stainless)
Part No. Thread Size
A-402 7/16-20 (1/4" 45 Flare) x 1/4-18 NPTF
Hose Stem-to-Hose Stem
Hose I.D. Part No.
3/16" HS-30
1/4" HS-31
5/16" HS-32
3/8" HS-33
1/2" HS-34
Flare-to-Flare Adapter (Stainless)
Part No. Thread Size
A-394 7/16-20 (1/4" 45 Flare) Both Ends A-375 5/8-18 (3/8" 45 Flare) Both Ends
Hose Clamp-to-Hose Clamp
Hose I.D. Hose O.D. Part No.
1/4" 15/32" HSC-B1
1/4" 1/2" HSC-B3
1/4" 5/8" HSC-B7
5/16" 5/8" HSC-C7
5/16" 11/16" HSC-C9
3/8" 9/16" HSC-D5
3/8" 5/8" HSC-D7
3/8" 11/16" HSC-D9
3/8" 3/4" HSC-D11
All stainless steel .ttings listed on this page are machined from Type 303 stainless steel bar stock.
Dust Caps and Dust Plugs
The use of dust caps and dust plugs keeps mating surfaces of disconnected couplings clean, and extends the useful life of seals and mechanical components. Plug dust caps prevent damage to plugs that could make a coupling unusable. All dust caps and plugs offered for Hansen couplings are listed on this page and the next.
HK-Style Dust Caps and Plugs
Vinyl Plug Dust Cap
Coupling
Plug Dust Cap Part No.
Socket Dust Plug Part No.
Type
Series
Metal
Vinyl
Metal
Vinyl
1-HK
PDC-1-HK*
P-PDC-1-HK
SDC-1-HK*
P-SDC-1-HK
2-HK
PDC-2-HK*
P-PDC-2-HK
SDC-2-HK*
P-SDC-2-HK
3-HK
PDC-3-HK*
P-PDC-3-HK
SDC-3-HK*
P-SDC-3-HK
4-HK
PDC-4-HK**
P-PDC-4-HK
SDC-4-HK**
P-SDC-4-HK
6-HK
PDC-6-HK**
P-PDC-6-HK
SDC-6-HK**
P-SDC-6-HK
8-HK
PDC-8-HK**
P-PDC-8-HK
SDC-8-HK**
P-SDC-8-HK
12-HK
PDC-12-HK**
SDC-12-HK**
20-HK
PDC- 20-HK**
SDC-20-HK**
UP10
P-PDC-2-HK
P-SDC-2-HK
2-HKIG
P-PDC-2-HK
2-HKIL
P-PDC-2-HK
3000
PDC-3000*
SDC-3000*
P-SDC-1-HK
4000
P-SDC-2-HK
5000
P-PDC-2-HK
6000
P-PDC-3-HK
1000
P-SDC-1-HK
400
P-SDC-2-HK
100
P-PDC-1-HK
P-SDC-1-HK
600
P-PDC-1-HK
P-SDC-1-HK
700
P-PDC-1-HK
P-SDC-1-HK
2-RL
P-PDC-1-HK
P-SDC-1-HK
3-RL
P-PDC-2-HK
P-SDC-2-HK
2-ST
P-SDC-1-HK
3-ST
P-SDC-2-HK
6-ST
P-PDC-4-HK
P-SDC-4-HK
8-ST
P-PDC-6-HK
10-ST
P-PDC-8-HK
3/8
PDC-2-HK*
P-PDC-2-HK
SDC-2-HK*
P-SDC-2-HK
1/2
PDC-3-HK*
P-PDC-3-HK
SDC-3-HK*
P-SDC-3-HK
3/4
PDC-4-HK**
P-PDC-4-HK
SDC-4-HK**
P-SDC-4-HK
1
PDC-6-HK**
P-PDC-6-HK
SDC-6-HK**
P-SDC-6-HK
Vinyl Socket Dust Plug
Gas-Mate Straight- One-Way Two-Way
Through
Metal Plug Dust Cap
Metal Socket Dust Plug
*Brass **Aluminum
Dust Caps and Dust Plugs
Series HA 15000 ISO 7241-1 Series A
Series QA 29000 Flat Face
Series 96 Wing Nut
Series WA 56000 10,000 psi Thread-to-Connect
Series WA 10000 Refrigerant and Liquid Transfer
Flex-Air Fittings
The Flex-Air Fitting is designed to rotate 360 at up to a 75 angle. The Flex-Air Fitting helps to alleviate Carpal Tunnel Syndrome and other stress related injuries in the workplace.
Features
. Unique design provides free 360 rotation with up to a 75 angle of rotation in any direction
. Many styles and sizes available
. 145 psig (10 Bar) pressure rating (all models)
Bene.ts
. Provides .exibility of tool position to help alleviate Carpal Tunnel Syndrome and back stress resulting in fewer lost-time injuries
. Minimizes paint damage
. Prevents kinking of air supply hose
Applications
. Assembly air lines in automotive, electronic and other industries
. Mechanical joints for robotics
. Vibration isolation
. Commercial and residential construction
Standard Materials
. Integrated steel/polyurethane construction
. Steel balls
. Buna-N (Nitrile) seals
. Thread sealant standard on male NPTs
Part Number Description Inside Dia.
FA25F-25M 1/4" NPT Female x 1/4" NPT Male 0.2" (5 mm) FA25F-37M 1/4" NPT Female x 3/8" NPT Male 0.3" (7.5 mm)
FA37F-37M 3/8" NPT Female x 3/8" NPT Male 0.3" (7.5 mm)
Part Number Description Inside Dia.
FA25M-25M 1/4" NPT Male x 1/4" NPT Male 0.2" (5 mm) FA37M-37M 3/8" NPT Female x 3/8" NPT Male 0.3" (7.5 mm)
Part Number Description Inside Dia.
FA25P-25M 1/4" Industrial Interchange x 1/4" NPT Male 0.2" (5 mm) FA37P-25M 3/8" Industrial Interchange x 1/4" NPT Male 0.3" (7.5 mm)
Part Number Description Inside Dia.
FA25AR-25M ARO210 Interchange x 1/4" NPT Male 0.2" (5 mm)
Part Number Description Inside Dia.
FA25LI-25M Lincoln Interchange x 1/4" NPT Male 0.2" (5 mm)
Part Number Description Inside Dia.
FA37H-37M 3/8" Barb x 3/8" NPT Male 0.3" (7.5 mm)
Part Number Description Inside Dia.
FA3RL-37M 3/8" RL Plug x 3/8" NPT Male 0.3" (7.5 mm)
Elastomer Selection Guide
Select seals compatible with the service intended for the couplings. Allowance must be made for the kind of .uid to be conveyed and its temperature. Chemically active .uids will destroy some seal materials. Certain seals withstand high temperatures, whereas others cannot. Use this elastomer selection guide to .nd the appropriate seal. NOTE: Elastomer or seal material listed as Standard is furnished in most Hansen couplings. Elastomers designated as -118, -146, -192, etc., are available as optional seal material for some couplings. Other seal materials available upon request to suit requirements. Consult a Hansen Distributor.
NOTE: The following information is accurate to the best of our knowledge; however, since service conditions vary so widely, it is intended as a guide only and is not a guarantee.
Seal Information
Dash No. Compound
-*** Buna-N C 90 Durometer
-115 Te.on
-118 Neoprene
-143 Viton
-146 Buna-N C 70 Durometer
-192* EPDM
-235. Kalrez
-236* EPDM
*** No Dash Number required for
standard seal material
* -192 and -236 compounds are not compatible
with mineral-based greases or oils
.Kalrez seals available by special quotation
ELASTOMER SELECTION GUIDE
FLUID HANSEN ELASTOMER
Air (to 200 F) ......Standard
Air (above 200F) -143
Acetone ...............-192*
Acetylene .............Standard
Alcohol, Ethyl .......-192*
Alcohol, Methyl ....Standard
Alkalies ................-192*
Ammonia, Anhydrous ...........................................................Standard
Ammonium Hydroxide ..........................................................-192*
Aroclor .................-143
Brake Fluid, Non-Petroleum Based ......................................-192*
Butane .................-146
Carbon Dioxide ....Standard
Carbon Tetrachloride ............................................................-143
Cellulube ..............-192*
Creosote ..............Standard
Diesel Fuel ...........-146
Diester Lubricants ................................................................-143
Ethane .................-146
Ethanol ................-192*
Ethylene Glycol ....-192*
Freon (most varieties) ...........................................................-118
Gasoline, Aromatic & Non-Aromatic .....................................-143
Glycerin ...............Standard
Helium .................Standard
Heptane ...............-146
Hexane ................-146
Houghto-Safe Series 200, 600, 5000 ...................................Standard
Houghto-Safe Series 1000 ...................................................-192*
Hydraulic Fluid, Petroleum-based with .................................Standard
Aniline Point above 160 F
Hydrolube ............Standard
Jet Fuel (to 250 F) ...............................................................-146
Jet Fuel (above 250 F) ........................................................-143
FLUID HANSEN ELASTOMER
Kerosene .............-146
Lindol ...................-192*
L.P. Gases ............Standard
Methane ...............-146
Methanol ..............Standard
Methyl Ethyl Ketone ..............................................................-192*
Methyl Iso-Butyl Ketone ........................................................-192*
MIL-H-5606A .......Standard
Mineral Spirits ......-146
Natural Gas .........Standard
Nitrogen ...............Standard
Octane .................-143
Oils, including: Animal, Mineral with Aniline ........................Standard
Point above 160F
and Non-Food Service Vegetable
OS45 & OS45-1 ...-143
Oxygen ................Service Conditions
Dictate Elastomer Selection
Pentane ...............-146
Perchloroethylene -143
Propane ...............Standard
Propylene ............-143
Pydraul ................-143
Steam (to 350 F) -192*
Steam (above 350 F) ..........................................................-236*
Stoddard Solvent .-146
Toluene ................-143
Transmission Oil, Automotive ...............................................Standard
Trichloroethylene .-143
Turpentine ............Standard
Versilube F-50 .....-192*
Water (to 180F) ..Standard
Water (above 180F) ............................................................-192*
* -192 and -236 compounds are not compatible with mineral-based greases or oils
Alphanumeric Part Number
Index
Part Number Page
Part Number Page
Part Number Page
Part Number Page
00A .......................................28
01A .......................................28
02A .......................................28
03A .......................................28
04-R ......................................28
05-R ......................................28
07A .......................................28
08A .......................................28
09A .......................................28
10....................................11, 15
100........................................26
1000......................................11
100-006 ................................62
100-008 ................................62
100-010 ................................62
100-012 ................................62
100-63 ..................................26
1000-43 ................................11
1000-63 ................................11
100-506 ................................62
100-508 ................................62
100-510 ................................62
100-512 ................................62
101........................................26
102........................................26
103........................................26
104........................................26
105........................................26
10-43 ....................................11
10C .................................11, 15
10FFP37 ...............................43
10FFP50 ...............................43
10FFS37 ...............................43
10FFS50 ...............................43
10G .................................11, 15
10-H41 ..................................38
10-H41BS .............................38
10-K41 ..................................38
10-K41BS .............................38
10R23 ...................................66
10R25 ...................................66
10R27 ...................................66
10-S41 ..................................56
10-S41BS .............................56
10-T40 ..................................57
10-T41 ..................................57
11....................................11, 15
110........................................26
1100......................................11
111........................................26
112........................................26
11B .................................11, 15
11G .................................11, 15
12....................................11, 15
1200......................................11
1216P13 ...............................66
1216P15 ...............................66
12FFP106UN ........................43
12FFP50 ...............................43
12FFP75 ...............................43
12FFS106UN ........................43
12FFS50 ...............................43
12FFS75 ...............................43
12G .................................11, 15
12-H41 ..................................38
12-H41BS .............................38
12-H41C ...............................38
12-H46 ..................................38
12-H46BS .............................38
12-H46C ...............................38
12-K41 ..................................38
12-K41BS .............................38
12-K41C ...............................38
12-K46 ..................................38
12-K46BS .............................38
12-K46C ...............................38
12-S46 ..................................56
12-S46BS .............................56
12-T45 ..................................57
12-T46 ..................................57
13....................................11, 15
1300......................................11
14....................................11, 15
14G .................................11, 15
15....................................11, 15
16....................................11, 15
1600......................................11
1600P ...................................11
16FFP50 ...............................43
16FFP75 ...............................43
16FFS50 ...............................43
16FFS75 ...............................43
16G .................................11, 15
16P .................................11, 15
16PG ..............................11, 15
16-S51 ..................................56
16-S51BS .............................56
16-T50 ..................................57
16-T51 ..................................57
17....................................11, 15
1700......................................11
1700P ...................................11
17G .................................11, 15
17P .................................11, 15
17PG ..............................11, 15
18....................................11, 15
180........................................24
1800......................................11
183........................................24
185........................................24
186........................................24
187........................................24
189........................................24
18-MAM ....................28, 29, 67
19FFP100 .............................43
19FFP131UN ........................43
19FFP75 ...............................43
19FFS100 .............................43
19FFS131UN ........................43
19FFS75 ...............................43
19-MBM ....................28, 29, 67
1A0 .......................................66
1A3 .......................................66
1B1 .......................................66
1B11 .....................................66
1B3 .......................................66
1B5 .......................................66
1B7 .......................................66
1G1 .......................................26
1G10 .....................................26
1G12 .....................................26
1G2 .......................................26
1G3 .......................................26
1G5 .......................................26
1-GB3 ...................................26
1-GB7 ...................................26
1-GD7 ...................................26
1-GD9 ...................................26
1-H11 ....................................36
1-H4 ......................................36
1-HRC-K ...............................37
1-K11 ....................................36
1-K4 ......................................36
1-S10 ....................................56
1-S10BS ...............................56
1-S11 ....................................56
1-S11BS ...............................56
1-S12 ....................................56
1-S17 ....................................56
1-SA0 ....................................11
1-SA3 ....................................11
1-SB1 ....................................11
1-SB3 ....................................11
1-SB5 ....................................11
1-SB7 ....................................11
1-SC5 ...................................11
1-SC7 ...................................11
1-SC9 ...................................11
1-SD11 .................................11
1-SD5 ...................................11
1-SD7 ...................................11
1-SD9 ...................................11
1-T10 ....................................57
1-T11 ....................................57
1-T15 ....................................57
20AP-37F .............................21
20AP-37M .............................21
20-H51 ..................................38
20-H51BS .............................38
20-H51C ...............................38
20-H56 ..................................38
20-H56BS .............................38
20-H56C ...............................38
20-H61 ..................................38
20-H61BS .............................38
20-H61C ...............................38
20-K51 ..................................38
20-K51BS .............................38
20-K51C ...............................38
20-K56 ..................................38
20-K56BS .............................38
20-K56C ...............................38
20-K61 ..................................38
20-K61BS .............................38
20-K61C ...............................38
20-MBM ....................28, 29, 67
20-S56 ..................................56
20-T56 ..................................57
21AP-25F .............................21
21AP-25H .............................21
21AP-25M .............................21
21AP-37F .............................21
21AP-37H .............................21
21AP-37M .............................21
22238....................................21
24AP-25FBS .........................21
24AP-25FG ...........................21
24AP-25H .............................21
24AP-25MBST ......................21
24AP-25MG ..........................21
24AP-31H .............................21
24AP-37FBS .........................21
24AP-37H .............................21
24AP-37MBST ......................21
24AP-50FBS .........................21
24AP-50H .............................21
24AP-50MBST ......................21
25FFP125 .............................43
25FFS125 .............................43
2607......................................21
2608......................................21
2608B ...................................21
2609......................................21
2609B ...................................21
2800......................................15
28S-12F ................................24
28S-25M ...............................24
2900......................................15
2A0 .......................................66
2A3 .......................................66
2B1 .......................................66
2B3 .......................................66
2B5 .......................................66
2B7 .......................................66
2B9 .......................................66
2C5 .......................................66
2C7 .......................................66
2C9 .......................................66
2DBP-25F .............................49
2DBP-25FBS ........................49
2DBS-25F .............................49
2DBS-25FBS ........................49
2D11 .....................................66
2D13 .....................................66
2D15 .....................................66
2D5 .......................................66
2D7 .......................................66
2D9 .......................................66
2FD11 ...................................66
2FD7 .....................................66
2FD9 .....................................66
2-H16 ....................................36
2-H16BS ...............................36
2-H16C .................................36
2-H6 ......................................36
2-H6C ...................................36
2-HIG10 ................................48
2-HIG11 ................................48
2-HIG15 ................................48
2-HIG16 ................................48
2-HIG20 ................................48
2-HIG720 ..............................48
2-HIG-LLRA720 ....................48
2-HIL10 .................................48
2-HIL11 .................................48
2-HIL15 .................................48
2-HIL16 .................................48
2-HIL20 .................................48
2-HIL720 ...............................48
2-HIL-LLRA720 .....................48
2-HRC-K ...............................37
2-K16 ....................................36
2-K16BS ...............................36
2-K16C .................................36
2-K16C-VB ...........................37
2-K6 ......................................36
2-K6C ...................................36
2-KIG-F .................................48
2-KIG-F15 .............................48
2-KIG-F16 .............................48
2-KIG-F20 .............................48
2-KIG-F720 ...........................48
2-KIL-F ..................................48
2-KIL-F15 ..............................48
2-KIL-F16 ..............................48
2-KIL-F20 ..............................48
2-KIL-F720 ............................48
2-L10 ....................................31
2-L11 ....................................31
2-L15 ....................................31
2-L15G ..................................31
2-L16 ....................................31
2-L16G ..................................31
2-L17 ....................................31
2-L185C5 ..............................31
2-L185C7 ..............................31
2-L185C9 ..............................31
2-L18B1 ................................31
2-L18B11 ..............................31
2-L18B3 ................................31
2-L18B5 ................................31
2-L18B7 ................................31
2-L18B9 ................................31
2-L195 ..................................31
2-L20 ....................................31
2-L20G ..................................31
2-L21 ....................................31
2-L22 ....................................31
2-L23D11 ..............................31
2-L23D13 ..............................31
2-L23D15 ..............................31
2-L23D5 ................................31
2-L23D7 ................................31
2-L23D9 ................................31
2-L25 ....................................31
2-L26 ....................................31
2-L27 ....................................31
2-L28P13 ..............................31
2-L28P15 ..............................31
2P13 .....................................66
2P15 .....................................66
2P17 .....................................66
2P19 .....................................66
2-R10 ....................................31
2-R11 ....................................31
2-R15 ....................................31
2-R16 ....................................31
2-R17 ....................................31
2-R185C5 .............................31
2-R185C7 .............................31
2-R185C9 .............................31
2-R18B1 ...............................31
2-R18B11 .............................31
2-R18B3 ...............................31
2-R18B5 ...............................31
2-R18B7 ...............................31
2-R18B9 ...............................31
2-R195 ..................................31
2-R20 ....................................31
2-R21 ....................................31
2-R22 ....................................31
2-R23D11 .............................31
2-R23D13 .............................31
2-R23D15 .............................31
2-R23D5 ...............................31
2-R23D7 ...............................31
2-R23D9 ...............................31
2-R25 ....................................31
2-R26 ....................................31
2-R27 ....................................31
2-R28P13 .............................31
2-R28P15 .............................31
2-S15 ....................................56
2-S15BS ...............................56
2-S16 ....................................56
2-S16BS ...............................56
2-S17 ....................................56
2-T15 ....................................57
2-T15BS ...............................57
2-T16 ....................................57
2-T16BS ...............................57
2-T17 ....................................57
3000......................................15
3000-43 ................................15
3000-63 ................................15
30SVS-25F ...........................22
30SVS-25M ..........................22
3100......................................15
31AP-25F .............................12
31AP-25M .............................12
31AP-37F .............................12
31AP-37M .............................12
3200......................................15
3300......................................15
3600......................................15
3600P ...................................15
3700......................................15
3700P ...................................15
38....................................12, 16
3800......................................15
3946......................................21
3947......................................21
3B1 .......................................66
3B3 .......................................66
3B5 .......................................66
3B7 .......................................66
3B9 .......................................66
3C7 .......................................66
3DBP-37F .............................49
3DBP-37FBS ........................49
3DBS-37F .............................49
3DBS-37FBS ........................49
3D11 .....................................66
3D13 .....................................66
3D15 .....................................66
3D5 .......................................66
3D7 .......................................66
3D9 .......................................66
3-H21 ....................................36
3-H21BS ...............................36
3-H21C .................................36
3-H8 ......................................36
3-H8C ...................................36
3-HRC-K ...............................37
3-K21 ....................................36
3-K21BS ...............................36
3-K21C .................................36
3-K21C-VB ...........................37
3-K21-VB ..............................37
3-K8 ......................................36
3-K8C ...................................36
3-L10 ....................................32
3-L15 ....................................32
3-L15G ..................................32
3-L16 ....................................32
3-L16G ..................................32
3-L17 ....................................32
3-L195 ..................................32
3-L195G ................................32
3-L20 ....................................32
3-L20G ..................................32
3-L21 ....................................32
3-L21G ..................................32
3-L22 ....................................32
3-L22G ..................................32
3-L23D11 ..............................32
3-L23D13 ..............................32
3-L23D15 ..............................32
3-L23D5 ................................32
3-L23D7 ................................32
3-L23D9 ................................32
3-L25 ....................................32
3-L25G ..................................32
3-L26 ....................................32
3-L26G ..................................32
3-L27 ....................................32
3-L27G ..................................32
3-L28P13 ..............................32
3-L28P15 ..............................32
3-L28P17 ..............................32
3-L28P19 ..............................32
3-L30 ....................................32
3-L30G ..................................32
3-L31 ....................................32
3-L32 ....................................32
3-L32G ..................................32
3-L33R23 ..............................32
3-L33R25 ..............................32
3-L33R27 ..............................32
3-PA0 ..............................11, 15
3-PA3 ..............................11, 15
3-PB1 ..............................11, 15
3-PB11 ............................11, 15
3-PB3 ..............................11, 15
3-PB5 ..............................11, 15
3-PB7 ..............................11, 15
3-PB9 ..............................11, 15
3-PC5 .............................11, 15
3-PC7 .............................11, 15
3-PC9 .............................11, 15
3-PD11 ...........................11, 15
3-PD13 ...........................11, 15
3-PD15 ...........................11, 15
3-PD5 .............................11, 15
3-PD7 .............................11, 15
3-PD9 .............................11, 15
3-R15 ....................................32
3-R16 ....................................32
3-R17 ....................................32
3-R195 ..................................32
3-R20 ....................................32
3-R21 ....................................32
3-R22 ....................................32
3-R23D11 .............................32
3-R23D13 .............................32
3-R23D15 .............................32
3-R23D5 ...............................32
3-R23D7 ...............................32
3-R23D9 ...............................32
3-R25 ....................................32
3-R26 ....................................32
3-R27 ....................................32
3-R28P13 .............................32
3-R28P15 .............................32
3-R28P17 .............................32
3-R28P19 .............................32
3-R30 ....................................32
3-R31A .................................32
3-R32 ....................................32
3-R33R23 .............................32
3-R33R25 .............................32
3-R33R27 .............................32
3-S20 ....................................56
3-S20BS ...............................56
3-S21 ....................................56
3-S21BS ...............................56
3-S22 ....................................56
3-SA0 ....................................15
3-SA3 ....................................15
3-SB1 ....................................15
3-SB11 ..................................15
3-SB3 ....................................15
3-SB5 ....................................15
3-SB7 ....................................15
3-SB9 ....................................15
3-SC5 ...................................15
3-SC7 ...................................15
3-SC9 ...................................15
3-SD11 .................................15
3-SD13 .................................15
3-SD5 ...................................15
3-SD7 ...................................15
3-SD9 ...................................15
3-T20 ....................................57
3-T20BS ...............................57
3-T21 ....................................57
3-T21BS ...............................57
3-T22 ....................................57
40....................................12, 16
400........................................12
4000......................................16
4000-A ..................................16
4004......................................12
4006......................................12
4008......................................12
400-A ....................................12
404..................................12, 16
40400....................................16
4050......................................12
40500....................................16
406..................................12, 16
40600....................................16
408..................................12, 16
40800....................................16
40G .................................12, 16
40-SB3 ..................................12
40-SB7 ..................................12
40-SD11 ...............................12
40-SD13 ...............................12
40-SD7 .................................12
40-SD9 .................................12
40-SP13 ................................12
40-SP15 ................................12
40-SP17 ................................12
40-SP19 ................................12
41....................................12, 16
410........................................12
4100......................................16
4100-A ..................................16
410-A ....................................12
41G .................................12, 16
42....................................12, 16
420........................................12
4200......................................16
42G .................................12, 16
43....................................12, 16
430........................................12
4300......................................16
43G .................................12, 16
44....................................12, 16
440........................................12
4400......................................16
45....................................12, 16
450........................................12
4500......................................16
4B1 .......................................66
4B3 .......................................66
4B5 .......................................66
4B7 .......................................66
4C7 .......................................66
4C9 .......................................66
4D11 .....................................66
4D13 .....................................66
4D15 .....................................66
4D5 .......................................66
4D7 .......................................66
4D9 .......................................66
4DBP-50F .............................49
4DBP-50FBS ........................49
4DBS-50F .............................49
4DBS-50FBS ........................49
4FD11 ...................................66
4FD15 ...................................66
4FD7 .....................................66
4FD9 .....................................66
4-HP10 .................................36
4-HP26 .................................36
4-HP26BS .............................36
4-HRC-K ...............................37
4-KP10 ..................................36
4-KP26 ..................................36
4-KP26BS .............................36
4-KP26-VB ............................37
4LA0 ...............................29, 66
4LA3 ...............................29, 66
4LB3 ...............................29, 66
4LB5 ...............................29, 66
4P13 .....................................66
4P15 .....................................66
4P17 .....................................66
4P19 .....................................66
4-PB1 ..............................12, 16
4-PB11 ............................12, 16
4-PB3 ..............................12, 16
4-PB5 ..............................12, 16
4-PB7 ..............................12, 16
4-PB9 ..............................12, 16
4-PD11 ...........................12, 16
4-PD13 ...........................12, 16
4-PD15 ...........................12, 16
4-PD5 .............................12, 16
4-PD7 .............................12, 16
4-PD9 .............................12, 16
4-PP13 ............................12, 16
4-PP15 ............................12, 16
4-PP17 ............................12, 16
4-PP19 ............................12, 16
4RA0 ...............................28, 66
4RA3 ...............................28, 66
4RB1 ...............................28, 66
4RB3 ...............................28, 66
4RB5 ...............................28, 66
4RB7 ...............................28, 66
4RD11 ............................28, 66
4RD7 ..............................28, 66
4RD9 ..............................28, 66
4-S25 ....................................56
4-S25BS ...............................56
4-S26 ....................................56
4-S26BS ...............................56
4-S27 ....................................56
4-SB11 ..................................16
4-SB3 ....................................16
4-SB5 ....................................16
4-SB7 ....................................16
4-SB9 ....................................16
4-SC7 ...................................16
4-SD11 .................................16
4-SD15 .................................16
4-SD5 ...................................16
4-SD7 ...................................16
4-SD9 ...................................16
4-SP13 ..................................16
4-SP15 ..................................16
4-SP17 ..................................16
4-SP19 ..................................16
4-T25 ....................................57
4-T25BS ...............................57
4-T26 ....................................57
4-T26BS ...............................57
4-T27 ....................................57
50....................................13, 17
500........................................13
5000......................................17
5000-A ..................................17
500-A ....................................13
501........................................13
50100....................................17
50400....................................17
50500....................................17
50G .................................13, 17
50-SD13 ...............................13
50-SD7 .................................13
50-SP13 ................................13
50-SP15 ................................13
50-SP17 ................................13
50-SP19 ................................13
50-SR23 ...............................13
50-SR25 ...............................13
50-SR27 ...............................13
510........................................13
5100......................................17
52....................................13, 17
520........................................13
5200......................................17
52G .................................13, 17
53....................................13, 17
530........................................13
5300......................................17
53-A ................................13, 17
53G .................................13, 17
54....................................13, 17
540........................................13
5400......................................17
54G .................................13, 17
55....................................13, 17
550........................................13
5500......................................17
55G .................................13, 17
56....................................13, 17
56G .................................13, 17
57....................................13, 17
570........................................13
5700......................................17
580........................................13
5800......................................17
585..................................13, 17
585G ...............................13, 17
59....................................13, 17
590........................................13
5900......................................17
59G .................................13, 17
5D11 .....................................66
5D13 .....................................66
5D15 .....................................66
5D5 .......................................66
5D7 .......................................66
5D9 .......................................66
5-PB1 ..............................13, 17
5-PB3 ..............................13, 17
5-PB5 ..............................13, 17
5-PB7 ..............................13, 17
5-PD11 ...........................13, 17
5-PD13 ...........................13, 17
5-PD15 ...........................13, 17
5-PD5 .............................13, 17
5-PD7 .............................13, 17
5-PD9 .............................13, 17
5-PP13 ............................13, 17
5-PP15 ............................13, 17
5-PP17 ............................13, 17
5-PP19 ............................13, 17
5-PR23 ...........................13, 17
5-PR25 ...........................13, 17
5-PR27 ...........................13, 17
5RB1 .....................................66
5RB3 .....................................66
5RB5 .....................................66
5RB7 .....................................66
5RC7 ....................................66
5RD11 ..................................66
5RD7 ....................................66
5RD9 ....................................66
5-SD11 .................................17
5-SD13 .................................17
5-SD15 .................................17
5-SD5 ...................................17
5-SD7 ...................................17
5-SD9 ...................................17
5-SP13 ..................................17
5-SP15 ..................................17
5-SP17 ..................................17
5-SP19 ..................................17
5-SR23 .................................17
5-SR25 .................................17
5-SR27 .................................17
60....................................13, 17
60G .................................13, 17
61....................................13, 17
61G .................................13, 17
6200......................................18
6300......................................18
6400......................................18
64A .......................................18
64GA ....................................18
6500......................................18
65A .......................................18
65GA ....................................18
6600......................................18
66A .......................................18
66GA ....................................18
6700......................................18
67A .......................................18
67GA ....................................18
6800......................................18
68A .......................................18
6900......................................18
69A .......................................18
6-B3 ......................................28
6-B5 ......................................28
6-B7 ......................................28
6-B9 ......................................28
6DBP-75F .............................49
6DBP-75FBS ........................49
6DBS-75F .............................49
6DBS-75FBS ........................49
6-D11 ....................................28
6-D5 ......................................28
6-D7 ......................................28
6-D9 ......................................28
6FFP25 .................................43
6FFS25 .................................43
6-HP12 .................................36
6-HP31 .................................36
6-HP31BS .............................36
6-HRC-K ...............................37
6-KP12 ..................................36
6-KP31 ..................................36
6-KP31BS .............................36
6-KP31-VB ............................37
6P13 .....................................66
6P15 .....................................66
6P17 .....................................66
6P19 .....................................66
6R23 .....................................66
6R25 .....................................66
6R27 .....................................66
6-S30 ....................................56
6-S30BS ...............................56
6-S31 ....................................56
6-S31BS ...............................56
6-S32 ....................................56
6-T30 ....................................57
6-T31 ....................................57
6-T32 ....................................57
7000......................................18
70A .......................................18
70GA ....................................18
71A .......................................18
71GA ....................................18
720B1 ...................................66
720B3 ...................................66
720B5 ...................................66
720B7 ...................................66
72A .......................................18
7-B11 ....................................29
7-B3 ......................................29
7-B5 ......................................29
7-B7 ......................................29
7P13 .....................................66
7P15 .....................................66
7P17 .....................................66
7P19 .....................................66
800........................................11
8DBP-100F ...........................49
8DBP-100FBS ......................49
8DBS-100F ...........................49
8DBS-100FBS ......................49
8-GHP-75M ..........................58
8-GHS-75FS .........................58
8-GHS-75FS-V .....................58
8-HP16 .................................36
8-HP36 .................................36
8-HP36BS .............................36
8-HRC-K ...............................37
8-KP16 ..................................36
8-KP36 ..................................36
8-KP36BS .............................36
8P13 .....................................66
8P15 .....................................66
8P17 .....................................66
8P19 .....................................66
8R23 .....................................66
8R25 .....................................66
8R27 .....................................66
8-S35 ....................................56
8-S35BS ...............................56
8-S36 ....................................56
8-S36BS ...............................56
8-S37 ....................................56
8-T35 ....................................57
8-T36 ....................................57
8-T36BS ...............................57
8-T37 ....................................57
900........................................11
902-14-143M ........................62
902-18-143M ........................62
902-23-143M ........................62
902-3-143 .............................59
903-8-143 .............................59
914-26-143M ........................62
914-3-143 .............................59
914-3-143M ..........................62
96-P31 ..................................44
96-P36 ..................................44
96-P41 ..................................44
96-S31 ..................................44
96-S36 ..................................44
96-S41 ..................................44
9-MBR ............................28, 67
A1 .........................................29
A2 .........................................29
A-375 ....................................67
A-394 ....................................67
A3P .......................................29
A-402 ....................................67
A4-L ......................................29
A5-L ......................................29
A7 .........................................29
A8 .........................................29
A9 .........................................29
B-10 ................................11, 15
B10-H41 ...............................38
B10-K41 ................................38
B10-T40 ................................57
B10-T40BS ...........................57
B10-T41 ................................57
B10-T41BS ...........................57
B12-FS-75F-13 .....................64
B12-H41 ...............................38
B12-H41BS ...........................38
B12-H46 ...............................38
B12-H46BS ...........................38
B12-K41 ................................38
B12-K41BS ...........................38
B12-K46 ................................38
B12-K46BS ...........................38
B12-T45 ................................57
B12-T45BS ...........................57
B12-T46 ................................57
B12-T46BS ...........................57
B16-FS-100F-21 ...................64
B16-T50 ................................57
B16-T51 ................................57
B16-T51BS ...........................57
B-17 ................................11, 15
B1-H11 .................................36
B1-K11 ..................................36
B1-K11-VB ............................37
B1-T10 ..................................57
B1-T10BS .............................57
B1-T11 ..................................57
B1-T11BS .............................57
B1-T12 ..................................57
B1-T15 ..................................57
B1-T17 ..................................57
B20-H51 ...............................38
B20-H51BS ...........................38
B20-H56 ...............................38
B20-H56BS ...........................38
B20-H61 ...............................38
B20-H61BS ...........................38
B20-K51 ................................38
B20-K51BS ...........................38
B20-K56 ................................38
B20-K56BS ...........................38
B20-K61 ................................38
B20-K61BS ...........................38
B20-T55 ................................57
B20-T56 ................................57
B23AS-25F ...........................21
B23AS-25FBS ......................21
B23AS-25H ...........................21
B23AS-25M ..........................21
B23AS-25MBST ...................21
B23AS-31H ...........................21
B23AS-37F ...........................21
B23AS-37FBS ......................21
B23AS-37H ...........................21
B23AS-37M ..........................21
B23AS-37MBST ...................21
B23AS-50FBS ......................21
B23AS-50H ...........................21
B23AS-50MBST ...................21
B24AS-25F ...........................22
B24AS-25FBS ......................22
B24AS-25H ...........................22
B24AS-25M ..........................22
B24AS-25MBST ...................22
B24AS-31H ...........................22
B24AS-37FBS ......................22
B24AS-37H ...........................22
B24AS-37MBST ...................22
B24AS-50FBS ......................22
B24AS-50H ...........................22
B24AS-50MBST ...................22
B24-FS-150F-45 ...................64
B2-H16 .................................36
B2-H16BS .............................36
B2-K16 ..................................36
B2-K16BS .............................36
B2-K16-VB ............................37
B2-T15 ..................................57
B2-T15BS .............................57
B2-T16 ..................................57
B2-T16BS .............................57
B2-T17 ..................................57
B3-H21 .................................36
B3-H21BS .............................36
B3-H21Y ...............................37
B3-K21 ..................................36
B3-K21-192 ..........................37
B3-K21BS .............................36
B3-K21-VB ............................37
B3-T20 ..................................57
B3-T20BS .............................57
B3-T21 ..................................57
B3-T21BS .............................57
B3-T22 ..................................57
B-40 ................................12, 16
B-406 ..............................12, 16
B-42 ................................12, 16
B-43 ................................12, 16
B4-FS-25F-2 .........................64
B4-HP26 ...............................36
B4-HP26BS ..........................36
B4-KP26 ...............................36
B4-KP26BS ..........................36
B4-T25 ..................................57
B4-T25BS .............................57
B4-T26 ..................................57
B4-T26BS .............................57
B4-T27 ..................................57
B-52 ................................13, 17
B-54 ................................13, 17
B-60 ................................13, 17
B-64A ....................................18
B-66A ....................................18
B6-FS-37F-5 .........................64
B6-HP31 ...............................36
B6-HP31BS ..........................36
B6-KP31 ...............................36
B6-KP31BS ..........................36
B6-KP31-VB .........................37
B6-T30 ..................................57
B6-T30BS .............................57
B6-T31 ..................................57
B6-T31BS .............................57
B6-T32 ..................................57
B-71A ....................................18
B8-FS-50F-8 .........................64
B8-HP36 ...............................36
B8-HP36BS ..........................36
B8-KP36 ...............................36
B8-KP36BS ..........................36
B8-T35 ..................................57
B8-T35BS .............................57
B8-T36 ..................................57
B8-T36BS .............................57
B8-T37 ..................................57
FA3RL-37M ..........................70
FA25F-25M ...........................70
FA25F-37M ...........................70
FA25LI-25M ..........................70
FA25M-25M ..........................70
FA25P-25M ...........................70
FA37F-37M ...........................70
FA37H-37M ..........................70
FA37M-37M ..........................70
FA37P-25M ...........................70
FA37P-37M ...........................70
FL96-075 ..............................44
FL96-100 ..............................44
FL96-125 ..............................44
FTP-251 ................................60
FTP-251BST .........................60
FTP-251-F ............................60
FTP-251-FBS .......................60
FTP-252 ................................60
FTP-252BST .........................60
FTP-252-F ............................60
FTP-252-FBS .......................60
FTP-253 ................................60
FTP-253-F ............................60
FTP-352 ................................60
FTP-352BST .........................60
FTP-352-F ............................60
FTP-352-FBS .......................60
FTP-353 ................................60
FTP-353BST .........................60
FTP-353-F ............................60
FTP-353-FBS .......................60
FTP-354 ................................60
FTP-354-F ............................60
FTP-554 ................................60
FTP-554-F ............................60
FTP-556 ................................60
FTP-556-F ............................60
FTS-204 ................................60
FTS-204HP ...........................60
FTS-204V .............................60
FTS-204VHP ........................60
FTS-205 ................................60
FTS-205V .............................60
FTS-206 ................................60
FTS-206HP ...........................60
FTS-206V .............................60
FTS-206VHP ........................60
FTS-214 ................................60
FTS-214HP ...........................60
FTS-214V .............................60
FTS-214VHP ........................60
FTS-215 ................................60
FTS-215V .............................60
FTS-216 ................................60
FTS-216HP ...........................60
FTS-216V .............................60
FTS-216VHP ........................60
FTS-224 ................................60
FTS-224HP ...........................60
FTS-224V .............................60
FTS-224VHP ........................60
FTS-225 ................................60
FTS-225V .............................60
FTS-226 ................................60
FTS-226HP ...........................60
FTS-226V .............................60
FTS-226VHP ........................60
FTS-306 ................................60
FTS-306HP ...........................60
FTS-306V .............................60
FTS-306VHP ........................60
FTS-308 ................................60
FTS-308HP ...........................60
FTS-308V .............................60
FTS-308VHP ........................60
FTS-316 ................................60
FTS-316HP ...........................60
FTS-316V .............................60
FTS-316VHP ........................60
FTS-318 ................................60
FTS-318HP ...........................60
FTS-318V .............................60
FTS-318VHP ........................60
FTS-326 ................................60
FTS-326HP ...........................60
FTS-326V .............................60
FTS-326VHP ........................60
FTS-328 ................................60
FTS-328HP ...........................60
FTS-328V .............................60
FTS-328VHP ........................60
FTS-504 ................................60
FTS-504HP ...........................60
FTS-504V .............................60
FTS-504VHP ........................60
FTS-506 ................................60
FTS-506HP ...........................60
FTS-506V .............................60
FTS-506VHP ........................60
GD 10526 41 ........................23
GD 10526 83 ........................23
GD 10536 41 ........................23
GD 10536 83 ........................23
GD 10556 01 ........................23
GD 10556 67 ........................23
GHP-11 .................................58
GHS-12 .................................58
GHS-12-V .............................58
GMP1250F ...........................62
GMS1250FH .........................62
GR-600 .................................28
GR-600-43 ............................28
GR-600-63 ............................28
GR-601 .................................28
GR-602 .................................28
GR-603 .................................28
GR-604 .................................28
GR-604R ..............................28
GR-605 .................................28
GR-605R ..............................28
GR-606 .................................28
GR-606P ...............................28
GR-606P-SL .........................28
GR-606-SL ...........................28
GR-607 .................................28
GR-607-SL ...........................28
GR-608 .................................28
GR-608P ...............................28
GR-608-SL ...........................28
GR-6-0A3 .............................28
GR-6-0B3 .............................28
GR-6-0B3-SL ........................28
GR-6-0B5 .............................28
GR-6-0B5-SL ........................28
GR-6-0B7 .............................28
GR-6-0B7-SL ........................28
GR-6-0C5 .............................28
GR-6-0C7 .............................28
GR-6-0C9 .............................28
GR-6-0D11 ...........................28
GR-6-0D7 .............................28
GR-6-0D9 .............................28
H25HHU ...............................67
H25MHU ...............................67
H37HHU ...............................67
HA 15011 00 .........................41
HA 15012 00 .........................41
HA 15021 00 .........................41
HA 15022 00 .........................41
HA 15031 00 .........................41
HA 15032 00 .........................41
HA 15036 00 .........................41
HA 15041 00 .........................41
HA 15042 00 .........................41
HA 15051 00 .........................41
HA 15052 00 .........................41
HA 15211 00 .........................41
HA 15212 00 .........................41
HA 15221 00 .........................41
HA 15222 00 .........................41
HA 15231 00 .........................41
HA 15232 00 .........................41
HA 15236 00 .........................41
HA 15241 00 .........................41
HA 15242 00 .........................41
HA 15251 00 .........................41
HA 15252 00 .........................41
HHU25F ................................67
HHU25M ...............................67
HHU37H ...............................67
HL2-T15 ................................57
HL2-T16 ................................57
HL3-T20 ................................57
HL3-T21 ................................57
HP 15111 00 .........................69
HP 15112 00 .........................69
HP 15121 00 .........................69
HP 15122 00 .........................69
HP 15131 00 .........................69
HP 15132 00 .........................69
HP 15141 00 .........................69
HP 15142 00 .........................69
HP 15151 00 .........................69
HP 15152 00 .........................69
HP3PS37F ............................46
HP3SB37M ...........................46
HS-30 ...................................67
HS-31 ...................................67
HS-32 ...................................67
HS-33 ...................................67
HS-34 ...................................67
HSC-B1 ................................67
HSC-B3 ................................67
HSC-B7 ................................67
HSC-C7 ................................67
HSC-C9 ................................67
HSC-D11 ..............................67
HSC-D5 ................................67
HSC-D7 ................................67
HSC-D9 ................................67
LL-10 ..............................11, 15
LL-1000 ................................11
LL10-H41 ..............................38
LL10-H41BS .........................38
LL10-K41 ..............................38
LL10-K41BS .........................38
LL10-S41 ..............................56
LL10-T40 ..............................57
LL10-T41 ..............................57
LL-11 ..............................11, 15
LL-1100 ................................11
LL12-H41 ..............................38
LL12-H41BS .........................38
LL12-H46 ..............................38
LL12-H46BS .........................38
LL12-K41 ..............................38
LL12-K41BS .........................38
LL12-K46 ..............................38
LL12-K46BS .........................38
LL12-S46 ..............................56
LL12-S46BS .........................56
LL12-T46 ..............................57
LL16-S51 ..............................56
LL16-S51BS .........................56
LL16-T50 ..............................57
LL16-T50BS .........................57
LL1-H11 ................................36
LL1-H4 ..................................36
LL1-K11 ................................36
LL1-K4 ..................................36
LL1-S10 ................................56
LL1-S10BS ...........................56
LL1-S11 ................................56
LL1-S11BS ...........................56
LL1-S12 ................................56
LL1-S17 ................................56
LL1-T10 ................................57
LL1-T11 ................................57
LL1-T11BS ...........................57
LL1-T12 ................................57
LL1-T17 ................................57
LL20-H51 ..............................38
LL20-H51BS .........................38
LL20-H56 ..............................38
LL20-H56BS .........................38
LL20-H61 ..............................38
LL20-H61BS .........................38
LL20-K51 ..............................38
LL20-K51BS .........................38
LL20-K56 ..............................38
LL20-K56BS .........................38
LL20-K61 ..............................38
LL20-K61BS .........................38
LL2-H16 ................................36
LL2-H16BS ...........................36
LL2-H6 ..................................36
LL2-K16 ................................36
LL2-K16BS ...........................36
LL2-K6 ..................................36
LL2-S15 ................................56
LL2-S15BS ...........................56
LL2-S16 ................................56
LL2-S16BS ...........................56
LL2-S17 ................................56
LL2-T15 ................................57
LL2-T15BS ...........................57
LL2-T16 ................................57
LL2-T16BS ...........................57
LL2-T17 ................................57
LL3-H21 ................................36
LL3-H21BS ...........................36
LL3-H8 ..................................36
LL3-K21 ................................36
LL3-K21BS ...........................36
LL3-K8 ..................................36
LL3-S20 ................................56
LL3-S20BS ...........................56
LL3-S21 ................................56
LL3-S21BS ...........................56
LL3-S22 ................................56
LL3-T20 ................................57
LL3-T20BS ...........................57
LL3-T21 ................................57
LL3-T21BS ...........................57
LL3-T22 ................................57
LL4-HP10 .............................36
LL4-HP26 .............................36
LL4-HP26BS .........................36
LL4-KP10 ..............................36
LL4-KP26 ..............................36
LL4-KP26BS .........................36
LL4-S25 ................................56
LL4-S25BS ...........................56
LL4-S26 ................................56
LL4-S26BS ...........................56
LL4-S27 ................................56
LL4-T25 ................................57
LL4-T25BS ...........................57
LL4-T26 ................................57
LL4-T26BS ...........................57
LL4-T27 ................................57
LL6-HP12 .............................36
LL6-HP31 .............................36
LL6-HP31BS .........................36
LL6-KP12 ..............................36
LL6-KP31 ..............................36
LL6-KP31BS .........................36
LL6-S30 ................................56
LL6-S31 ................................56
LL6-S31BS ...........................56
LL6-S32 ................................56
LL6-T30 ................................57
LL6-T30BS ...........................57
LL6-T31 ................................57
LL6-T31BS ...........................57
LL6-T32 ................................57
LL8-HP16 .............................36
LL8-HP36 .............................36
LL8-HP36BS .........................36
LL8-KP16 ..............................36
LL8-KP36 ..............................36
LL8-KP36BS .........................36
LL8-S36 ................................56
LL8-S36BS ...........................56
LL8-S37 ................................56
LL8-T35 ................................57
LL8-T36 ................................57
LL8-T36BS ...........................57
LLS16 ...................................67
LLS20 ...................................67
LLS24 ...................................67
LLS26 ...................................67
LLS30 ...................................67
LLS35 ...................................67
LNFT-200 ..............................60
LNFT-300 ..............................60
LNFT-500 ..............................60
ML1-H11 ...............................36
ML1-K11 ...............................36
ML2-H16 ...............................36
ML2-H16BS ..........................36
ML2-K16 ...............................36
ML2-K16BS ..........................36
ML3-H21 ...............................36
ML3-H21BS ..........................36
ML3-K21 ...............................36
ML3-K21BS ..........................36
ML4-HP26 ............................36
ML4-HP26BS ........................36
ML4-KP26 .............................36
ML4-KP26BS ........................36
ML6-HP31 ............................36
ML6-HP31BS ........................36
ML6-KP31 .............................36
ML6-KP31BS ........................36
ML8-HP36 ............................36
ML8-HP36BS ........................36
ML8-KP36 .............................36
ML8-KP36BS ........................36
P2-STP-25M .........................58
P2-STS-25H .........................58
P3-STP-25M .........................58
P3-STP-37H .........................58
P3-STP-37M .........................58
P3-STS-37H .........................58
P4-30P-25M .........................19
P4-30S-25H ..........................19
P7-40P-37M .........................19
P7-40S-37H ..........................19
PDC-12-HK ...........................68
PDC-1-HK .............................68
PDC-2-HK .............................68
PDC-3000 .............................68
PDC-3-HK .............................68
PDC-4-HK .............................68
PDC-6-HK .............................68
PDC-8-HK .............................68
PDC-96-075 ..........................69
PDC-96-100 ..........................69
PDC-96-125 ..........................69
PP2-H25F .............................37
PP2-K25F .............................37
P-PDC-1-HK .........................68
P-PDC-2-HK .........................68
P-PDC-3-HK .........................68
P-PDC-4-HK .........................68
P-PDC-6-HK .........................68
P-PDC-8-HK .........................68
P-SDC-1-HK .........................68
P-SDC-2-HK .........................68
P-SDC-3-HK .........................68
P-SDC-4-HK .........................68
P-SDC-6-HK .........................68
P-SDC-8-HK .........................68
QD 29111 00 ........................69
QD 29112 00 ........................69
QD 29121 00 ........................69
QD 29122 00 ........................69
QD 29141 00 ........................69
QD 29142 00 ........................69
QD 29151 00 ........................69
QD 29152 00 ........................69
RA 04210 00 .........................65
RA 04220 00 .........................65
RA 04230 00 .........................65
RA 04240 00 .........................65
RA 04250 00 .........................65
RD-700 .................................29
RD-701 .................................29
RD-702 .................................29
RD-703 .................................29
RD-704 .................................29
RD-704L ...............................29
RD-705 .................................29
RD-705L ...............................29
RD-706 .................................29
RD-706P ...............................29
RD-706-SL ............................29
RD-707 .................................29
RD-707-SL ............................29
RD-708 .................................29
RD-708-SL ............................29
RD-7-0A3 ..............................29
RD-7-0B3 ..............................29
RD-7-0B3-SL ........................29
RD-7-0B5 ..............................29
RD-7-0B5-SL ........................29
RD-7-0B7 ..............................29
RD-7-0D11 ...........................29
RD-7-0D7 .............................29
RD-7-0D9 .............................29
S19 .......................................67
S20 .......................................67
S205 .....................................67
S21 .......................................67
S22 .......................................67
S23 .......................................67
S24 .......................................67
S25 .......................................67
S26 .......................................67
SDC-12-HK ...........................68
SDC-1-HK .............................68
SDC-20-HK ...........................68
SDC-4DB ..............................68
SDC-8DB ..............................68
SDC-2-HK .............................68
SDC-3000 .............................68
SDC-3-HK .............................68
SDC-4-HK .............................68
SDC-6-HK .............................68
SDC-8-HK .............................68
SDC-96-075 ..........................69
SDC-96-100 ..........................69
SDC-96-125 ..........................69
SN16 .....................................67
SN17 .....................................67
SN18 .....................................67
UL1-H11 ...............................36
UL1-K11 ...............................36
UL2-H16 ...............................36
UL2-K16 ...............................36
UL3-H21 ...............................36
UL3-K21 ...............................36
UL-600 ..................................28
UL-601 ..................................28
UL-602 ..................................28
UL-603 ..................................28
UL-604 ..................................28
UL-604R ...............................28
UL-605 ..................................28
UL-605R ...............................28
UL-700 ..................................29
UL-702 ..................................29
UL-703 ..................................29
UL-704 ..................................29
UL-704L ................................29
UL-705 ..................................29
UL-705L ................................29
UP10P-25F ...........................45
UP10P-25M ..........................45
UP10P-37F ...........................45
UP10P-37M ..........................45
UP10S-25F ...........................45
UP10S-25M ..........................45
UP10S-37F ...........................45
UP10S-37M ..........................45
VFT-200 ................................59
VFT-300 ................................59
VFT-500 ................................59
VS-3000 ................................59
VSFT-200 ..............................59
VSFT-500 ..............................59
W11J340 ..............................52
W11J54041 ..........................52
W11J64041 ..........................52
W11M340 .............................52
W11M540 .............................52
W11M640 .............................52
W28A34N .............................52
W28A54N .............................52
W28A64N .............................52
W54A32N .............................52
W54A33N .............................52
W54A52N .............................52
W54A53N .............................52
W54A62N .............................52
W60L38012 ..........................52
W60L38038 ..........................52
W60L58058 ..........................52
W60L68078 ..........................52
W62A34N .............................52
W62A54N .............................52
W62A64N .............................52
WA 10034 I0 .........................51
WA 10034 M0 .......................51
WA 10037 I0 .........................51
WA 10037 M0 .......................51
WA 10054 I0 .........................51
WA 10054 M0 .......................51
WA 10057 I0 .........................51
WA 10057 M0 .......................51
WA 10064 I0 .........................51
WA 10064 M0 .......................51
WA 10067 I0 .........................51
WA 10067 M0 .......................51
WA 10134 00 ..................52, 69
WA 10137 00 ..................52, 69
WA 10154 00 ..................52, 69
WA 10157 00 ..................52, 69
WA 10164 00 ..................52, 69
WA 10167 00 ..................52, 69
WA 56114 00 ........................69
WA 56117 00 ........................69
WA 56124 00 ........................69
WA 56127 00 ........................69
WA 56514 00 ........................46
WA 56517 00 ........................46
WA 56524 00 ........................46
WA 56527 00 ........................46
WFT-200-228 ........................59
WFT-300-228 ........................59
WFT-500-228 ........................59
|
