|
Tools, Installation,Operation, Maintenance
Low Pressure “Speedbite”, Cone & Thread: Manual and Machine, Quick Set (QSS) Tooling
Autoclave Engineers Tools工具
Principle of Operation:
Safe, efficient operation of any product is inherently dependent upon its proper installation. In this section the
preparation and assembly of low, medium and high pressure connections is explained. Also covered is the assembly procedure for medium and high pressure Cone & Thread Connections as well as anti-vibration collet gland assemblies.
Correct installation procedures are further promoted by providing dimensional information associated with a variety of Parker Autoclave Engineers tube connections as well as the torque required to properly seat numerous Parker Autoclave Engineers components. Several tools developed by Parker Autoclave Engineers are presented to help accomplish proper valve, fitting and tubing installation and maintenance. Video tutorials are available on our website (www.Autoclave.com) and a Setup & Operational DVD is sent with every Cone and Thread Machine.
When installing or maintaining any pressure component, common practice dictates the use of proper safety equipment at all times.
Inside you will find:
- Installation Instructions for Low Pressure "Speedbite" Single Ferrule Bite-Type Compression Fittings
- Part numbers and Installation Instructions for both Medium and High Pressure Manual Cone & Thread Kits and Accessories
- Assembly and Installation Instructions for Anti-Vibration Gland Assemblies
- Part numbers and Specification detail for Cone & Thread Machine (required for all tubing sizes above 9/16")
- Connection Torque Values (for both Standard and Special Materials)
- Connection and Packing Gland Nut Sizes, Torque Wrenches and Crows Foot Wrench Adapters
- Reamer Part Numbers for cleaning up Connection Sealing Surfaces
- Valve Packing, Running and Seating Torque Values
- Male and Female Connection reference drawings with dimensions with connection names
- Manual Make-up and Installation instructions for Quick Set System (QSS) - only 1/4" and 3/8" tube sizes
- Hydraulic Set Up Tool for Quick Set System (HST) - All Sizes
- Part Numbers and Specifications for the Hydraulic Tube Bender (HTB)
- Maintenance and Lubrication site locations for various Parker Autoclave Engineers valves with recommended Lubricants
Tools, Installation,Operation, Maintenance Autoclave Engineers Tools工具產品技術資料下載
Low Pressure “Speedbite”, Cone & Thread: Manual and Machine, Quick Set (QSS) Tooling
- Autoclave Engineers Tools, Installation, Operation & Maintenance
|
|
Speed-Bite Connections
快速咬合連接
快速咬入壓縮連接件的安裝
Installation of Speed Bite compression connections |
Manual Coning and Threading Tools
手動錐螺紋加工工具
尺寸小于等于9/16“油管的手動錐形和螺紋工具
Manual coning and threading tools for sizes up to 9/16" tubing |
 |
|
Quick Set System (QSS) Connection
快速設置系統（QSS）
Installation of QSS Compression Connections
連接QSS壓縮連接件的安裝 |
Hydraulic Sleeve Set Tool
液壓套筒定位工具
Hydraulically compress sleeves up to 3/4"，設計用于QS系列壓蓋和套筒。該工具可快速方便地將套管壓縮到油管上。 |
|
 |
Anti-Vibration Collet Gland Assembly
防振夾頭壓蓋總成
Anti-Vibration Collet Gland Assembly Procedure防振夾頭壓蓋裝配程序
|
Re-Seating Tool
重新安裝工具
High and medium pressure female connection re-seating tool. 高壓和中壓陰螺紋連接重新固定工具。
|
|
|
Electric Coning and Threading Machine
電動加工工具
訂購型號：AEGCTM-2 and
符合CE認證型號：
AEGCTM-2E-CE coning and threading machine. 用于Coned-and Threaded錐面和螺紋加工的切屑刀具 |
Torque Wrench, Wrench Adapters and Torque Values
扭矩扳手、扳手適配器和扭矩值，微調力矩扳手
Adjustable torque wrench with adapters for valves and tubing connections. Tables of torque values required for repair and installation of valves and tubing.閥門和管道連接用帶適配器的可調扭矩扳手。閥門和管道修理和安裝所需扭矩值表。 |
|
|
| Tubing Connections
管連接
Tube connection details for low, medium, and high pressure connections. . 管連接細節，用于低、中、高壓連接 |
Hydraulic Tube Bender 液壓彎管機
Hydraulic tube bender for Autoclave Engineer's tubing. 高壓釜工程師用液壓彎管機。 |
|
|
Autoclave Engineers Hydraulic Tube Bender with Single-stage Hydraulic Hand Pump - HTB
液壓彎管機
用于高壓管道的彎曲。彎管機配有泵、油缸、機架和彎管工裝，以上部件全部可裝在帶鎖的便攜箱中。
訂購型號HTB。
UOM: EA
Tube O.D: 1/4 to 1 Inch (6.35 to 25.4mm)
Tool Type: Tube bender
Tool Sub-type: Tool |
Autoclave Engineers Hydraulic Tube Bender with Single-stage Hydraulic Hand Pump - HTB
液壓彎管機
用于高壓管道的彎曲。彎管機配有泵、油缸、機架和彎管工裝，以上部件全部可裝在帶鎖的便攜箱中。
訂購型號HTB。
UOM: EA
Tube O.D: 1/4 to 1 Inch (6.35 to 25.4mm)
Tool Type: Tube bender
Tool Sub-type: Tool |
Coned-and- Threaded手動加工工具
Parker Autoclave Engineers手動 Coned-and- Threaded加工工具，可對小于9/16”(14.3mm鋼管進行錐面加工。這種精密的優質手動工具可現場加工AE中壓和高壓鋼管末端，以便于進行安裝。鋼管夾緊頭，可使鋼管正確居中。進刀布局使操作員便于控制切割深度，以防止出現加工硬化效應。成對更換刀片，在錐面加工時可精確、快速成型，保證鋼管末端平整。切割區域必須保持連續潤滑。
螺紋模具工裝設計用于固定適當?shù)哪＞咭约庸ね鈴?/16”(14.3mm以下的標準 Parker Autoclave Engineers鋼管。可互換導向套正確引導工具精確地車出螺紋。
提供全套工具組件，請咨詢廠家
|
fcg.cnmec@parkerdistribution.com.cn
