|
Hydraulics, Inc. 快速接頭
SWIVELS, COUPLINGS, AND CONTROLS FOR HYDRAULIC SYSTEMS
SWIVELS；S-Inline，HS-Heavy Duty Inline，9S-90° Swivel，9SS-Dual Plane Swivel，18S-Parallel Plane Swivel，Flange Swivels
SWIVELS旋轉接頭
特點和優勢Features and Advantages
本網站描述的液壓傳動旋轉接頭包括可用于流體動力系統的完整的旋轉接頭尺寸和配置范圍。對旋轉接頭類型、幾何關系及其包括SAE和/或ISO流體端口連接器的組合給予了相當大的關注。以前不可用的端口類型作為標準產品提供。Hydraulics, Inc. fluid conducting swivel joints described in this website include the most complete range of swivel joint sizes and configurations available for use in fluid power systems. Considerable attention is placed on swivel types, geometric relations, and their inclusive combinations of connectors for SAE and/or ISO fluid ports. Port types not previously available are included as standard offerings.
功能Function
在需要旋轉的地方，液壓系統公司提供的長期品種為系統開發人員提供了選擇具有流體端口幾何關系的旋轉體的機會，這些旋轉體補充了系統流體端口之間的運動。這些產品為設計者提供了改進現有概念的機會，并采取了不同的方法來進行新的設備設計。Where swivels are required, the long standing variety offered by Hydraulics, Inc., provide system developers the opportunity to select swivels having geometric relations of fluid ports that compliment the movement between a systems fluid ports. These products offer designers an opportunity to improve existing concepts and take a different approach to new equipment design.
應用Application
此處列出的碳鋼旋轉閥包括廣泛的可接受流量、多種端口類型和高達6000 psi的壓力額定值。這些特性使液壓系統公司的旋轉裝置適用于許多流體動力系統。從1966年開始，水龍頭的設計已經證明在各種流體系統中都是成功的。自1955年以來，可靠性和質量標準一直是公司的傳統，在這些產品中普遍采用。The carbon steel swivels listed herein, encompass a broad range of accepted flow volume, variety of port types, and pressure ratings as high as 6,000 psi. These attributes make Hydraulics, Inc. swivels suitable for use in many fluid power systems. Beginning in 1966, the swivel design has proven successful throughout a broad variety of fluid systems. The same standards of dependability and quality that have been a company tradition since 1955 are prevalent in these products.
CAUTION!
不要試圖在壓力下斷開和拆卸旋轉裝置。在壓力下，不要從閥桿上拆下旋轉筒。不要試圖操作損壞的旋轉接頭，也不要操作顯示油液泄漏和/或明顯軸承磨損的旋轉接頭。所選旋轉接頭及其附屬部件組裝時的壓力額定值不應超過組裝部件壓力額定值的低值。請參閱安全信息，選擇和使用液壓系統，包括旋轉接頭。Do not attempt to disconnect and disassemble swivels under pressure. Do not remove the swivel barrel from stem while under pressure. Do not attempt to operate damaged swivels and do not operate swivels displaying fluid leak and/or obvious bearing wear. The pressure rating of the selected swivel, in assembly with it's attached components, should not exceed the lowest of the assembled component's pressure rating. Refer to Safety Information, Selecting and Using Hydraulics, Inc. Swivel Joints.
此處所示的技術信息是基于受控條件下的實際測試結果。數據被認為是可靠的，但是考慮到流體動力系統的多樣性和旋轉可能遇到的操作條件，用戶僅負責通過自己的分析和測試來確保所選產品的性能。Technical Information shown herein is based on actual test results under controlled conditions. The data is considered to be reliable, however considering the diversity of fluid power systems and the operating conditions which swivels may encounter, the user is solely responsible for assuring performance of selected products through it's own analysis and testing.
Hydraulics, Inc. reserves the right to change the design and/or specifications of it's products without notice.
DANGER!
這些產品僅用于流體動力系統中的液體輸送。不正確選擇或不正確使用這些產品和/或本文所述系統或其他相關物品可能導致死亡、人身傷害和財產損失。These products are for liquid transfer in fluid power systems only. Failure from improper selection, or improper use of these products and/or the systems described herein or other related items can cause death, personal injury and property damage.
Hydraulics Inc.
PRODUCTS
Swivels
Couplings
Seal Kits
Rapid Response Torque Control
Hydraulic Throttle Control
SWIVELS
S-Inline
HS-Heavy Duty Inline
9S-90° Swivel
9SS-Dual Plane Swivel
18S-Parallel Plane Swivel
Flange Swivels
COUPLINGS
5TV - Poppet Style
6TV - Poppet Style Flanged Port
TVF - Flat Face Style
E - Refrigerant Only
SEAL KITS
RESOURCES
Swivel Selection
Part # System
Performance Info
Codes / Standards
Safety Info - Swivels
Safety Info - Couplings
Environmental Policies
INDUSTRIES
|
