|
Parker Legris樂可利快插接頭 Legris push-in fittings
派克漢尼汾Parker Hannifin產品 接頭和快換接頭 接頭 快插式接頭
快插式接頭
使用快插式接頭能直觀、快速、有效地連接管路，以創建流體分配管網。Legris樂可利快插式接頭可快速設計安裝回路,來用于如: 壓縮空氣, 天然氣或液態的流體.該接頭具有良好的耐壓, 耐溫和流體的適應性能. 連接和脫離可用手動瞬間實現
 |
 |
LF3000 系列快插式接頭 |
LF3600 系列銅鍍鎳快插式接頭 |
|
|
LF 3800/LF 3900 系列303/316L不銹鋼快插接頭，用于腐蝕環境 |
LF6100黃銅快插接頭，用于潤滑系統及真空系統 |
|
|
LF3200微型氣動推入式接頭（3mm） |
|
LF3000 系列快插式接頭
LF 3000 系列快插式接頭
LF 3000 系列快插式接頭系列有多種形狀和尺寸，您可以找到符合您需求的優質產品，從而優化設備的使用。
工程塑料或者銅鍍鎳氣動調速節流閥
工程塑料或者銅鍍鎳氣動調速節流閥
派克樂可利調速節流閥產品有工程塑料、銅鍍鎳或鋁等形式的產品。帶外部調節和安全調節螺絲兩種調節方式，提供了精密調節和緊湊性，適用于所有應用。
LIQUIfit 接頭
LIQUIfit 接頭
派克的 LIQUIfit 接頭確保可靠，緊湊的連接，用于液體輸送的應用。LIQUIfit為水應用提供“環保設計”的創新替代方案; 沒有流體污染，保證環境保護。
LF3600 系列銅鍍鎳快插式接頭
LF 3600 系列銅鍍鎳快插式接頭
為了滿足您的技術和環境要求，派克樂可利設計了該系列的金屬快插式接頭，在大多數苛刻環境下能夠為工業流體提供穩定、可靠和耐用的連接方案。
銅鍍鎳快插接頭，Prestolok PLP 系列
銅鍍鎳快插接頭，Prestolok PLP 系列
派克的Prestolok PLP 接頭提高了產量，提高了效率，減少了占地面積，加快了裝配和無泄漏的創新。
符合D.O.T.剎車管路要求
符合D.O.T.剎車管路要求
適用于所有D.O.T. 卡車和拖車應用，派克Prestomatic 接頭與傳統的壓縮接頭比，裝配時間縮短了90％。
全銅快插接頭，符合 D.O.T. 剎車管路要求
全銅快插接頭，符合 D.O.T. 剎車管路要求
Parker的 PTC 接頭是一種符合D.O.T. 以及 SAE 標準的快插接頭，與傳統的壓縮接頭比，減少了安裝時間。
LF 3800/LF 3900 系列303/316L不銹鋼快插接頭，用于腐蝕環境
LF 3800/LF 3900 系列303/316L不銹鋼快插接頭，用于腐蝕環境
為了滿足您的技術和環境要求，派克樂可利設計了該系列的金屬快插式接頭，在大多數苛刻環境下能夠為工業流體提供穩定、可靠和耐用的連接方案。
塑料埋入式接頭： LF 3000和LIQUIt Carstick，快速接頭
塑料埋入式接頭： LF 3000和LIQUIt Carstick，快速接頭
派克樂可利開發了Carstick埋入式接頭系列產品，維護非螺紋連接腔體組裝前后密封系統完整性。一體式Carstick埋入式接頭緊湊型設計能實現制造過程自動化，提高系統穩定性。
派克TrueSeal 系列，符合FDA認證全塑料快插接頭
派克TrueSeal 系列，符合FDA認證全塑料快插接頭
派克TrueSeal 接頭由符合FDA標準的材料制造，是符合與食品接觸的NSF-51接頭.灰色的乙縮醛接頭符合NSF-61對飲用水的要求。
氣動消音器
氣動消音器
消音器安裝到排氣回路，用于降低設備運行時的噪音值，從而提高用戶舒適度。
氣動閉鎖接頭
氣動閉鎖接頭
閉鎖接頭用于成對地安裝在氣缸上，當先導信號中斷時，同時切斷進氣和排氣從而鎖定氣缸。
PMT系列，Prestometic 黃銅快插接頭
PMT系列，Prestometic 黃銅快插接頭
派克的Prestometic黃銅接頭是為所有D.O.T.（美國交通局）卡車和拖車應用設計的。適用車輛和設備的各種應用，具有行業先進的性能和價值。
LF3000 系列鉸接式接頭
LF 3000 系列鉸接式接頭
當只能從上方安裝并且需要配合管路方向時，該系列接頭之選。該系列模塊化接頭包括單一配置和復式配置，可滿足更加靈活的設計。
復合材料快插接頭
復合材料快插接頭
復合材料快插連接接頭提供了一種將管件與接頭連接的簡單方法。Prestolok復合材料接頭不需要使用襯套和擰緊螺母，從而減少裝配時間。
Prestolok PLM金屬快插接頭
Prestolok PLM金屬快插接頭
派克 Prestolok PLM接頭具有高磷，符合FDA標準，無電鍍鎳，耐水，耐苛性洗滌劑和其他腐蝕性流體。
LF3000系列快插接頭附件 派克樂可利設計了不同的附件來保護設備以及操作，
LF3000系列快插接頭附件 派克樂可利設計了不同的附件來保護設備以及操作，
派克樂可利設計了不同的配件來保護操作者和設備，并且可以避免管路的意外斷開。不同的顏色標識系統可以用來分辨不同的流體回路。
LF 3000 自密封接頭和旋轉接頭
LF 3000 自密封接頭和旋轉接頭
派克樂可利開發了兩種創新的推入式接頭，以便集成各種功能，并允許在氣動回路上快速安裝。
LF 3000 模塊化氣動快插接頭
LF 3000 模塊化氣動快插接頭
這些連接接頭可在緊湊的空間內連接盡量多的管道。派克樂可利提供符合人體工程學的解決方案，以實現復雜的快速安裝連接。
LIQUIt 快插式接頭，帶金屬油口
LIQUIt 快插式接頭，帶金屬油口
LIQUIfit 系列產品用于液體輸送應用，補充擴展了金屬過渡接頭的選擇范圍。這些接頭確保可靠和緊湊的連接，提供了優異的堅固性能。
ACCE_Region_Product_List???
快插式接頭( 21 - 37 / 37 ) 切換至列表視圖 List切換至網格視圖 Grid PREV
氣動傳感接頭
氣動傳感接頭
派克氣動傳感接頭可以在氣缸行進至末端，缸內背壓即將消失時做動，輸出氣/電壓或電子信號，以作為其他控制之用。
Prestolok PLS 不銹鋼快插接頭
Prestolok PLS 不銹鋼快插接頭
派克PLS接頭符合FDA標準，允許與食品和其他侵蝕性環境的永久接觸。
不銹鋼氣動調速節流閥
不銹鋼氣動調速節流閥
不銹鋼調速節流閥是在需要高機械強度或者高化學腐蝕性的應用環境中，可以用來調節氣缸活塞桿的速度以及氣體的流速。
快插式埋入接頭，用于交通行業
快插式埋入接頭，用于交通行業
派克的SAE埋入式接頭允許用戶消除安裝和組裝常規管螺紋配件所需的空間和勞動力。
氣動調壓接頭
氣動調壓接頭
無論進氣端壓力如何波動，派克樂可利調壓接頭都可以使輸出給氣動設備的壓力值保持恒定。
工業用埋入式快插接頭
工業用埋入式快插接頭
派克的工業埋入式接頭允許用戶消除安裝和組裝常規管螺紋接頭所需的空間和勞力。
氣動緩啟動接頭
氣動緩啟動接頭
這種接頭可以防止突然沖擊，保護您的系統。在系統開啟后，控制出氣端回路的壓力逐漸增加至所需壓力，從而有助于減少工業事故的發生。
氣動減壓接頭
氣動減壓接頭
派克樂可利減壓接頭用于將氣動回路的壓力設定為固定值。因此，它們能夠通過限制氣缸壓力實現節能。
PMH低壓液壓接頭
PMH低壓液壓接頭
PMH快插連接接頭設計用于加快裝配，在難以到達的區域，如液壓操縱桿端口。
金屬埋入式接頭
金屬埋入式接頭
為了兼容多種流體和適應惡劣使用狀況(+150?C)，派克樂可利開發了兩類埋入式接頭。使用我們的金屬埋入式接頭可以優化安裝配置，對于FTL而言，接頭還可以拆卸。
LIQUIfit 聚合材料單向閥
LIQUIfit 聚合材料單向閥
LIQUIfit 單向閥能滿足飲料輸送的要求。
這些接頭可以讓流體單方向流動，反向截止。
這些接頭可以進行管式安裝，能夠對系統進行整體保護。
LIQUIfit+ 快插接頭，用于敏感流體
LIQUIfit+ 快插接頭，用于敏感流體
用于傳輸敏感性流體，LIQUIfit+系列產品可抑制回路中的細菌生長，在清潔后可 達到無菌的清潔度，LIQUIfit +接頭有助于降低維護成本。該系列接頭無需開槽即可直接與304以及316L不銹鋼管連接。
氣動塑料快換接頭
氣動塑料快換接頭
快換接頭無需排空整個系統即可隔離回路。它們便于反復連接和斷開，確保絕對安全
CleanFit 快插接頭，用于生命科學和潔凈室
CleanFit 快插接頭，用于生命科學和潔凈室
這個“環保設計”的“CleanFit系列接頭用于生命科學和潔凈室，在清潔度，可靠性和安全性方面超越了當前連接的限制。 這種超清潔范圍確保與大多數氣體完全兼容，符合苛刻的應用和標準。
旋轉彎頭
旋轉彎頭
派克快插式旋轉彎頭設計有更好的穩定性和耐用性，免于由于管道過度彎曲而導致的管道磨損。
LF 3600 Low Lead Brass Push-In Fittings
LF 3600 Low Lead Brass Push-In Fittings
This range of low lead brass fittings offers a reliable solution designed for all kind of coffee machine of hot beverages dispenser. Its robust design and proven technology offer
optimum performance for a universal use.
TrueSeal Acetal & Kynar Check Valves - Push to Connect
TrueSeal Acetal & Kynar Check Valves - Push To Connect
Parker's Push-to-Connect check valves are manufactured from either acetal or kynar material and allow liquid to flow in one direction.
LF 3000系列 塑料接頭適用于壓縮空氣
樂可利LF3000系列塑料接頭可廣泛應用于氣動領域,體積小, 具有真空能力,工作壓力為20 bar, 工作溫度從-20°C 到 +80°C, 可連接多種材質的塑料管類產品
LF 3200: 3 MM PUSH-IN FITTINGS
The LF 3200 range is the answer to very small pneumatic installations with severe size and weight constraints, together with an absolute requirement for precision and reliability. LIQUIFIT and LIQUIFIT+: TWO PUSH-IN FITTINGS SYSTEMS FOR WATER AND BEVERAGES These 2 "eco-designed" ranges propose an innovative alternative for water and beverage applications. No fluid contamination occurs and environmental protection is guaranteed. These fittings ensure reliable and compact connections for liquid transfer applications. LIQUIFIT+ is more particularly dedicated to the transfer of sensitive fluids. This range reduces the growth of bacteria in the circuits for 100% cleanliness after cleaning and can be directly connected to stainless steel tubing, without grooving, for diameters 5/16" and 3/8".
LIQUIfit WITH METAL ADAPTOR
This LIQUIfit? range extension, composed of fittings with metal adaptors, in stainless steel or FDA nickel-plated brass, was designed for liquid transfer applications. These fittings ensure reliable and compact connections as well as excellent
robustness, particularly when combined with metallic ports.
LF3600系列 銅鍍鎳接頭適用于流體及氣體
樂可利LF3600銅鍍鎳接頭用于低腐蝕性環境或食品制造行業．銅鍍鎳的材質和FKM的密封圈都符合FDA標準。適用真空應用，工作壓力30bar，工作溫度從-20°CF到150°C間，可與所有塑料管類產品連接使用
LF 3900/LF3800系列, 采用不銹鋼材質, 適用于嚴苛的流體和環境
LF 3900和LF 3800產品系列,所有結構采用不銹鋼材質,可用于傳輸腐蝕性的流體和工作環境, 并可應用于多個行業: 食品, 化工,醫療等…本體和基座采用AISI 316L不銹鋼材質, FKM密封圈, 釋放還采用不銹鋼316L (LF 3900) 或 303 (LF 3800).工作壓力為20 bar, 工作溫度從 -20°C 至 +120°C, 可于所有塑料材質管子連接使用
LF6100系列銅快速接頭
適用于潤滑系統樂可利LF6100系列銅質快速接頭采用雙層密封結構，可確保管子不脫落．工作壓力為60bar，工作溫度從-40°C到120°C。該系列接頭可用于傳輸潤滑油，冷卻系統或需要增強系統安全的場合
Legris埋入式接頭
This range is designed to implement sealing capability directly into other components; it can optimize dimensions, installation time and compatibility with different environments. Parker Legris proposes polymer or metal cartridges, suitable for different usage constraints or housing. The polymer range offers Carstick cartridges and Quick Fittings (a combination of a Carstick and instant fitting) for compressed air and LIQUIfit Carsticks for all fluids and gases. The metal range comes in different materials: brass and stainless steel. Suitable for vacuum and for pressures up to 20 bar, for use between -20° C and +95° C (depending on model).
- 本系列產品為自動氣壓裝置提供良好的解決方案
- 節約安裝時間，完全安全
- 為配合塑料管件而設計（尼龍和 PU）
MISCELLANEOUS ACCESSORIES FOR INSTANT FITTINGS
Legris push-in fittings
LF 3000, POLYMER HR, FOR COMPRESSED AIR The LF 3000 range of durable plastic fittings is ideal for pneumatic installations, modern design and compact. Vacuum capability (28" Hg), working pressure up to 20 bar, working temperature from -20°C to +80°C, for use with all types of calibrated plastic tubing.
LF 3200: 3 MM PUSH-IN FITTINGS
LIQUIFIT and LIQUIFIT+: TWO PUSH-IN FITTINGS SYSTEMS FOR WATER AND BEVERAGES
LIQUIfit WITH METAL ADAPTOR
LF3600, NICKEL-PLATED BRASS, FOR LIQUIDS AND GASES
LF3800-LF3900 STAINLESS STEEL FOR AGGRESSIVE FLUID
MISCELLANEOUS ACCESSORIES FOR INSTANT FITTINGS
Stainless Steel Push-To-Connect Fittings
Parker Legris' comprehensive range of stainless steel Push-to-Connect fittings for the transfer of low-pressure industrial fluids, including the patented LF 3800? pneumatic fittings, is an efficient way to connect tubing to a fitting to create a fluid distribution network. With its quick installation, versatility and unsurpassed durability, the stainless steel push-in fittings contribute to improve the durability of machines against corrosion. All our stainless steel Push-to-Connect fittings are available in a wide range of configurations and are manufactured in AISI 316L to withstand the most diverse fluids, including aggressive chemicals, and extreme temperatures or pressures, which are used in many of today's major industrial markets.
LF 3800/ LF 3900 - 303/316L Stainless Steel Push-In Fittings for Aggressive Environments
In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most demanding environments.
Prestolok PLS Push-to-Connect Stainless Steel Fittings
Parker's PLS push-to-connect pneumatic fittings conforms to FDA standards permitting permanent contact with food and other aggressive environments.
Plastic Push-To-Connect Fittings
Parker legris’ comprehensive portfolio of plastic push-to-connect fittings for industrial low pressure fluids transfert, including patented LF 3000? pneumatic fittings, for low pressure fluids transfert is the most intuitive and efficiency way of connecting tubes to a fitting in order to create a fluid distribution network. Thanks to its quick installation, versatility and exceptional lifespan, the plastic push-in fitting contributes to improving machine efficiency and cost reduction. All of our plastic push to connect fittings are available with a wide selection of configurations and plastic materials suitable for a wide of fluids among other things compressed air, gas, water, food liquids and beverages or chemicals, that serve across many of today's major industrial markets.
PFA Gripper (Compression) Tube Fittings (sizes up to 3/4 inch) – Pargrip Series
Pargrip PFA Tube Fittings provide a leak tight connection, making them ideal for use in highly corrosive chemical tubing systems. The fittings feature a double ferrule design and are available in a variety of sizes (1/8 to 3/4 inch) and configurations.
UHP PFA Fusible Pipe Fittings (sizes up to 2 inch) – Parbond Series
Parbond Series PFA Fusible Pipe Fittings offer high leak integrity and are designed to yield a permanent connection in high-flow, minimal pressure drop applications. They are ideal for ultra-high purity (UHP) and corrosive chemical piping systems.
UHP PFA Tube Fittings (sizes up to 1 inch) – Parflare Series
Parflare PFA Tube Fittings provide a leak tight connection with minimal dead volume and are ideally suited for use in ultra-high purity (UHP) semiconductor manufacturing and/or corrosive chemical applications. Available in sizes from 1/4 to 1 inch.
UHP PFA Threaded Pipe Fittings (sizes from 1/8 inch - 1 inch)
PFA Threaded Pipe Fittings are ideally suited for ultra-high purity or corrosive chemical handling piping applications. The fittings offer high leak integrity and extreme resistance to corrosion. They are available in sizes ranging from 1/8 to 1 inch.
UHP PFA/PTFE Thermocouple Sensor Assembly – TS Series
The TS Series PFA/PTFE Thermocouple Sensor Assembly is suited for point-of-use temperature monitoring in ultra-high purity fluid handling systems. It offers superior corrosion resistance and is designed to accept any 1/8 inch thermocouple probe.
UHP PFA Tube Fusion Bond Fittings (sizes up to 1 inch) – Tubebond Series
Tubebond Series PFA Tube Bond Fittings (sizes 1/4 to 1 inch) offer high leak integrity and are ideal for ultra-high purity (UHP) tubing systems that do not require removable components or have lower pressure requirements that may not require PFA pipe.
18 Parts
Pneumatic Banjo Fittings - LF 3000?
This range of fittings is ideal when access is only possible from above and orientation of the tube is required. This range of modular fittings includes single and multiple configurations, allowing wide flexibility of design.
88 Parts
Modular & Multi-port Pneumatic Push-in Connectors - LF 3000?
These modular & multi-port connectors allow the maximum number of tube connections in a minimum of space. Parker Legris offers an ergonomic solution to enable quick connection for the most complex installations.
26 Parts
Pneumatic Self-Sealing and Oscillating Fittings - LF 3000?
Parker Legris has developed two innovative push-in fittings in order to integrate various functions and allow quick installation on pneumatic circuits.
34 Parts
Accessories for Push-In Fittings - LF 3000?
Parker Legris has designed different accessories to protect operators and equipment, and prevent accidental disconnection of tubing. Colour-coding also allows for fluid circuit identification.
79 Parts
Air Brake D.O.T. composite push-to-connect fittings, PTC
Parker's PTC fitting is a composite push-to-connect air brake fitting that meets D.O.T. and SAE specifications and reduces assembly time versus compression style fittings.
186 Parts
Push-to-Connect all plastic FDA compliant fitting, Parker TrueSeal
Parker's TrueSeal push-in tube fittings are manufactured from FDA compliant materials and are NSF-51 listed for contact with food. Gray acetal fittings meet NSF-61 requirements for potable water.
379 Parts
LIQUIfit+ Push-In Fittings for Sensitive Fluids
For the transfer of sensitive fluids, the LIQUIfit+ range reduces the growth of bacteria in your circuits for 100% cleanliness after cleaning, and can be directly connected to stainless steel tubing, without grooving.
15 Parts
Direct Buried Connectors
The new Parker Legris connectors were developed to optimise installation and provide long-term integrity for underground FTTx networks.
24 Parts
Direct Install Connectors
A range of high performance connectors dedicated to direct install systems for FTTx to guarantee easy use and long service time.
21 Parts
LIQUIfit? Push-In Fittings with Metal Adaptors
The LIQUIfit? range now benefits from a range extension of metal adaptors designed for liquid transfer applications.
These fittings ensure reliable and compact connections combined with excellent robustness.
223 Parts
Passive Gas Block Connector
Easy-to-use product, providing quick and efficient sealing of the end of the FTTx* network and thereby long-term protection of the installation.
5 Parts
Composite Push-to-Connect Fittings
Parker Prestolok composite push-to-connect fittings provide a simple way of connecting tubes to a fitting. Prestolok composite push in fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut.
LIQUIfit Fittings
Parker's LIQUIfit fitings ensure reliable and compact connections for liquid transfer applications. LIQUIfit offers an "eco-designed" innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed.
Industrial Push-to-Connect Cartridges
Parker's industrial cartridges allows the user to eliminate the space and labor required to install and assemble a conventional pipe thread fitting.
14 Parts
Pneumatic Push-In Fittings - LF 3000?
The LF 3000? pneumatic fitting range, with its wide variety of shapes and configurations, allows you to find the perfect connector to meet your needs and thus optimise the use of your equipment.
697 Parts
CleanFit Push-In Fittings for Life Sciences and Clean Rooms
This "eco-designed" CleanFit range drives high-tech equipment beyond current connection limits in terms of cleanliness, reliability and safety. It ensures perfect compatibility with most gases, and complies with demanding applications and standards.
237 Parts
Oscillating Elbows
Parker's push-to-connect oscillating elbows are designed for optimum reliability and durability preventing tube wear due to excessive flexing of the tubing.
25 Parts
Autoline SAE J2044 Push-to-Connect Fittings
Parker's Autoline push-to-connect design reduces hose assembly fabrication time and the exclusive locking mechanism minimizes leaks and installation failures.
|
fcg.cnmec@parkerdistribution.com.cn
