|
|
TPX (TPX) HOSE
3-Ply Nitrile Rubber Attack/Supply Hose Snap-tite Hose TPX utilizes a 3-ply design where the ribbed cover and smooth nitrile
liner are extruded independently.
|
HFX (HFX) HOSE
Extruded Nitrile Rubber Attack/Supply Hose Snap-tite Hose HFX is a nitrile thru-the-weave, rubber covered fire hose that
utilizes both polyester and nylon yarn in the reinforcing jacket. |
|
|
ATX (ATX) HOSE
Extruded Nitrile Rubber Attack/Supply Hose Manufactured in similar process as TPX, Snap-tite Hose ATX utilizes a 3-ply design where the cover and liner are extruded independently and double vulcanized to guarantee a consistent, compact hose wall. |
LD Hose
Lightweight Extruded Rubber Hose Snap-tite Hose LD is a premium quality, nitrile rubber covered fire hose that is manufactured using a unique process which permanently bonds the polyester reinforcement to the nitrile rubber cover/liner |
|
|
TE HOSE
Polyester Double Jacket Attack Hose Snap-tite Hose TE hose is compact and weather, abrasion and crack resistant. Capable of operating pressures up to 225 psi (1550 kPa) (not all sizes), TE is also made of NSF Standard 61 approved materials and can be used for potable water |
National Fire Hose:
N-Dura (NP) HOSE
Nylon Double Jacket Attack Hose N-Dura?has an outstanding record of durability and value: 30 years of fire ground experience and millions of feet sold prove that it is one of America favorites |
|
|
Triple Duty (TD) HOSE
Large Diameter Nylon Double Jacket Hose National Fire Hose Triple Duty gives you a double jacket alternative. The olyurethane liner is lighter than rubber and the nylon outer jacket, treated with our exclusive Dura-Cote?abrasion resistant
encapsulation, provides the durability you need |
Triple Poly (TP) HOSE
Large Diameter Polyester Double Jacket Hose Looking for a polyurethane lined, polyester jacketed, all synthetic large
diameter hose National Fire Hose Triple Poly gives you that alternative |
|
|
Dura-Pak (DP) HOSE
Nylon Double Jacket Attack Hose When introduced, Dura-Pak started an industry-wide trend toward lightweight hi-rise hose |
8D (8D) HOSE
Polyester Double Jacket Supply Hose Our National Fire Hose 8D is a municipal grade double jacket hose with a lightweight EPDM rubber liner that meets all the requirements of NFPA 1961 |
|
|
8T (8T) HOSE
Lightweight Polyester Double Jacket Hose This double jacket municipal grade fire hose incorporates a lightweight polyurethane liner that meets all the requirements of NFPA 1961 |
Quick Draw (QD) HOSE
Light Duty Polyester Single Jacket Forestry Hose Quik DrawTM is a small diameter, lightweight, compact single jacket fire hose using standard brass Garden Hose Thread (GHT) fittings having a working pressure of 150 psi (1030 kPa) |
|
|
8F (8F) HOSE
Polyester Single Jacket Forestry Hose National 8F Fire Hose Type187 is a lightweight, all-synthetic fire hose with a polyurethane lining inside a polyester jacket designed to meet the USDA Forest Service specification 5100-187 for ynthetic
Lined fire hose |
6D Hose
Polyester Double Jacket Hose National 6D Fire Hose is designed almost identically to our type 8D hose but for lower operating pressures at 275 psi (1895 kPa) maximum |
|
|
8M (Mine Hose)
Polyester Double Jacket Hose Type 8M mine hose is a premium quality Neoprene rubber lined, double jacket hose that has been MSHA (Mine Safety & Health Administration) approved for use in any mine |
8T Hose
Polyurethane Lined Hose National 8T Fire Hose has the same jacket construction as 8D in that it is made with two jackets of
tightly woven polyester but is lined with polyurethane which is lighter and packs tighter than 8D |
|
|
3P - Low Pressure HOSE
Polyester Single Jacket Hose Type 3P is an economical single jacket industrial hose made from high strength polyester along
with an EPDM rubber liner |
5P - Medium Pressure HOSE
Polyester Single Jacket Hose Type 5P hose is the perfect medium pressure hose that is tough enough to meet most application requirements while remaining economical for most budgets |
|
|
6P - High Pressure HOSE
Polyester Single Jacket Hose Type 6P hose is a higher pressure hose that is tough enough to be used for industrial firefighting. 6P is a polyester single jacket style hose with an EPDM rubber liner that can also handle some chemicals and
petroleum based products |
5M - Mine Hose
Polyester Single Jacket Hose National 5M Mine Hose is a polyester single jacket hose with a Neoprene rubber liner that resists burning inherently better than exclusively hydrocarbon rubber |
|
|
Conquest (FC) HOSE
Polyester Double Jacket Attack/Supply Hose Looking for a hose to flow a tremendous amount of water You found it with CONQUEST! Today fires are hotter and more water is needed at the nozzle to knock them down fast |
Supreme (FS) HOSE
Polyester Double Jacket Attack Hose Supreme is a durable, rugged, traditional double jacket fire hose and one of the best values on the market today |
fcg.cnmec@parkerdistribution.com.cn
